PATHWORK.TXT Driver File Contents (lna-100n2-ac3.zip)

Driver Package File Name: lna-100n2-ac3.zip
File Size: 453.1 KB

==================================================================
NOTES ON
Installing Accton EN2228 16 bit 10/100 PCMCIA Ethernet adapter
For DECnet PathWork v4.0 Users
==================================================================
    (c) 1999 Copyright Accton Technology Corp. ALL RIGHTS RESERVED


This document contains EN2228 PCMCIA ethernet adapter installation notes,
which is  not included in the EN2228 PCMCIA ethernet adapter USER'S GUIDE
or onscreen instructions, for DECnet PathWork v4.0 users.


This document contains information on the following topics:

1.0   Overview
2.0   Installation Notes

-----------------------------------------------------------------

1.0 Overview
------------

DECNet Pathwork users, please also refer to the following:

-------------------------------------------------------------------
File                Description/Installation Notes
-------------------------------------------------------------------
INST_DOS.TXT        Overall Installation notes for DOS users,
                    including users of Windows 3.1/3.11.
\NDIS2\README.TXT   Overall installation notes for all NDIS users


2.0   Installation Notes
------------------------

    DECnet PathWork provides a NETSET.EXE program for installing EN2228 PC
    Card NDIS drivers. For information on the usage of this program,please
    refer to the DECnet installation manual.

    Follow the steps:

    Step1 Install DECnet PathWork
    Select "3Com's Etherlink II card".

    Step2
    Modify your CONFIG.SYS file to include the following line:
        device = c:\decnet\ELNKII.SYS
        to
        device = c:\decnet\EN2228.DOS

    Step3
    Add the following line into your CONFIG.SYS file:
        device = c:\decnet\ACCOPEN.EXE /IRQ:5 /IOP:300
        before
        device = c:\decnet\EN2228.DOS

    Step4
    Modify the following lines in your PROTOCOL.INI file:

        [EN2228]
        drivername = EN2228$

        [IPX4MAC]
           :
        bindings = EN2228
           :

        [DATALINK]
           :
        bindings = EN2228
           :
server: web3, load: 0.75