Accton Technology Corporation
PC-NFS Software Interface Program Installation
For EN1203 Ethernet Adapter
Copyright (C) 1994, 1995 by Accton Technology Corporation.
All rights reserved.
Using any Accton Ethernet LAN Adapter and the Accton PC-NFS Software Interface
Program, you can run the Sun MicroSystems PC-NFS on your PC.
The following files will be used in this installation:
Files Contents
--------------------------------------------------------------
PCNFSIF.SYS PC-NFS Software Interface Program
PCIPD.COM Accton Packet Driver for Ether-DUO PCI cards
INSTALLATION PROCEDURE:
1. Start the installation process by following the procedure described in the
PC-NFS Manual for installing the Sun Microsystems PC-NFS program in your
PC's hard disk. When asked to identify the type of network interface card
you are using, select "WD8003" from the list. Likewise, when asked for the
interrupt level and the base I/O address select:
Interrupt Level (IRQ) 3
I/O Base Address 300h
2. Copy the following files to the \NFS directory of your hard disk:
PCNFSIF.SYS
PCIPD.COM
3. Modify the config.sys file to include the following:
DEVICE=C:\ANSI.SYS
DEVICE=C:\NFS\PCNFS.SYS
DEVICE=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\PCNFSIF.SYS
LASTDRIVE=V
4. Create or modify an existing autoexec.bat file to include the following:
C:\NFS\PCIPD 98
SET PATH = C:\; C:\NFS
SET TZ=CST6
SET NFSDRIVE=C
PRT *
NFSRUN
For your system to work properly, make sure that the C:\NFS\PCIPD 98
command line is placed before the NFSRUN command line. For more information
on the NWPD.COM program, refer to the README.TXT file of the Accton Packet
Driver for Ether_Duo PCI adapters.
Allowable values for the software interrupt vector range from 96 to 128. The
default software interrupt vector value is 98.
5. Reboot the PC and start the PC-NFS program. You may now run PC-NFS commands
on your PC to allow communication with other computers on the network that
use the TCP/IP protocol.
-- THE END --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.