Accton Ethernet Adapter
NDIS DRIVER FOR LAN MANAGER INSTALLATION
=========================================
The drivers named ETHPCI contained in the directories
MSLANMAN.DOS and MSLANMAN.OS2 are conformed to the
Network Driver Interface Specification (NDIS)
defined by Microsoft/3Com.
NDIS Driver Installation on LAN Manager v2.0
--------------------------------------------
1. Type Setup in the LAN Manager directory and press
Enter.
2. Choose "Import Network Drivers..." in the "Action"
field. Press <Enter> to continue.
3. Insert your Driver Diskette into either drive
A: or B:. Then press <Enter> to see the list
of Imported Network Drivers appear onscreen.
4. Press the <Space bar> to select the appropriate
Network Adapter, i.e. "Accton PCI Ethernet Adapter Card"
for the EtherDuo-PCI Ethernet Adapters. Then press <Enter>
to confirm your choice.
5. Follow screen instructions to complete the process,
until the Network Driver appears onscreen.
6. Identify your Network Adapter if asked. For example,
select "Accton PCI Ethernet Card" to confirm any
EtherDuo-PCI Ethernet Adapter.
7. Select the <Add driver> and the <Add protocol> options.
Then select <OK> to confirm your choices. The
Workstation's primary parameters should appear onscreen.
8. Respond to all prompts issued onscreen to complete the
process. Select <OK> to confirm a choice.
9. Save all selections. Choose "Save" from the "Action Menu"
10. Press <F3> to exit.
NDIS Driver Installation on LAN Manager v2.1
--------------------------------------------
1. Type lmsetup in the LAN Manager directory and
press <Enter>. The Microsoft LAN Manager
Setup screen should appear.
2. Choose "Network Drivers..." in the
"Configuration" field. Press <Enter> to
confirm your choice.
3. Choose <Add New Configs> and press <Enter>
to display a list of Network Adapter
Drivers.
4. Choose <Other Driver> and press <Enter>.
5. Insert the Driver Diskette into drive A:
or B: of your PC. Indicate the drive
location of the diskette and select
<OK> to proceed.
6. Select the appropriate Network Adapter
Driver from the list. For example,
select "Accton PCI Ethernet adapter."
Select <OK> to confirm your choice.
7. Select an appropriate protocol. Use the
<Space bar> to highlight your choice.
8. Select <OK> to confirm your choice.
A Configuration Complete message should
appear onscreen.
9. Save the configuration. Select <Save>.
10. Press <F3> to exit.
NDIS Driver Installation on LAN Manager v2.2
--------------------------------------------
1. Type setup in the LAN Manager directory and
press <Enter>. The Microsoft LAN Manager
Setup screen should appear.
2. Choose "Network Drivers" from the
"Configuration" field. Press <Enter> to
confirm your choice.
3. Choose <Add New Config> and press <Enter>
to display a list of Network Adapter
Drivers.
4. Choose <Other Driver> and press <Enter>.
5. Insert the Driver Diskette into drive A:
or B: of your PC. Indicate the drive
location of the diskette and select
<OK> to proceed.
6. Select the appropriate Network Adapter
Driver from the list. For example,
select "Accton PCI Ethernet adapter."
Select <OK> to confirm your choice.
7. Select an appropriate protocol. Use the
<Space bar> to highlight your choice. If
you have chosen the TCP/IP protocol, you
will be prompted to key-in the IP address,
the subnet mask, and the default gateway
(router). By the default, the workstation
number of NetBios session is set to 6.
Please consult Microsoft LAN Manager
Installation Manual for more details,
or check the online help.
8. Select <OK> to confirm your choice.
A Configuration Complete message should
appear onscreen.
9. Save the configuration. Select <Save>.
10. Press <F3> to exit.
If you are installing the LAN Manager for the first
time, you will be prompted to key-in the default user
name and domain of the workstation, as well as to answer
the questions concerning Windows environment and memory
management. Just follow the instructions on the screen.
Sample Configuration Files
--------------------------
LAN Manager 2.0
CONFIG.SYS File
LASTDRIVE=Z
BUFFERS = 35
FILES = 35
SHELL=C:\DOS50\COMMAND.COM C:\DOS50\e:1000 /p /E:1024
DEVICE=C:\HIMEM.SYS
DEVICE=C:\DOS50\SETVER.EXE
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\ETHPCI\ETHPCI.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS
PROTOCOL.INI File
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[NETBEUI_XIF]
Drivername = netbeui$
BINDINGS = "ETHPCI_NIF"
[ETHPCI_NIF]
; PROTOCOL.INI for Accton PCI ethernet adapter
drivername = ETHPCI$
;SIA_MODE = AUTOSENSE [AUTOSENSE, TP, AUI, TP_FULL_DUPLEX]
; End of this sample file
AUTOEXEC.BAT File
@echo off
PROMPT $P$G
PATH=c:\PE2;C:\DOS50;C:\NC;
APPEND=C:\PE2;C:\DOS50;
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
REM ===== LANMAN 2.0 ====
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
NET START WORKSTATION
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES
REM ===== LANMAN 2.0 ====
LAN Manager 2.1 or LAN Manager 2.2
CONFIG.SYS File
LASTDRIVE=Z
BUFFERS = 35
FILES = 35
SHELL=C:\DOS50\COMMAND.COM C:\DOS50\e:1000 /p /E:1024
DEVICE=C:\HIMEM.SYS
REM DEVICE=C:\LANMAN.DOS\DRIVERS\DOSUTILS\EMM386.EXE NoEMS ;;delete this
DEVICE=C:\DOS50\SETVER.EXE ;;line
DOS=HIGH,UMB
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ACCTON\ETHPCI\ETHPCI.DOS
PROTOCOL.INI File
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "ETHPCI_NIF"
LANABASE = 0
[ETHPCI_NIF]
; PROTOCOL.INI for Accton PCI ethernet adapter
drivername = ETHPCI$
;SIA_MODE = AUTOSENSE [AUTOSENSE, TP, AUI, TP_FULL_DUPLEX]
; End of this sample file
AUTOEXEC.BAT File
@echo off
PROMPT $P$G
PATH=c:\PE2;C:\DOS50;C:\NC;
APPEND=C:\PE2;C:\DOS50;
@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
@REM=== LANMAN 2.1 ===
SET PATH=C:\LANMAN.DOS\NETPROG;%PATH%
NET START WORKSTATION
LOAD NETBEUI
@REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES
@REM === LANMAN 2.1 ===
-----
All trademarks or brand names mentioned are properties
of their respective companies.
---The End---
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.