WINNT.TXT Driver File Contents (en1208.zip)

		 Accton EN1208 PCI Ethernet Adapter
	       NDIS/3 DRIVER FOR WINDOWS INSTALLATION


>*******************************************************************<
>								    <
> The driver contained in this directory applies for the following: <
>								    <
>		 32-bit IO Mode PCI Ethernet adapter		    <
>								    <
> They are used with Microsoft Windows NT Release 3.5 or above on   <
> the X86 platform.						    <
> The drivers named EN1208 conform to the Network Driver	    <
> Interface Specification (NDIS) 3.0.				    <
>								    <
>*******************************************************************<



>>**  File list of the directory \WINNT  <<**

EN1208.SYS	NDIS/3 driver for the adapter on Windows NT

OEMSETNT.INF	Installation information file for EN1208.SYS

WINNT.TXT	this documentation file



>>**  Driver Installation on Microsoft Windows NT  <<**


   1)  Double click the Control Panel icon in Windows NT.

   2)  Click on the Network icon.

   3)  Click on the "Add Adapter" button.

   4)  Select "<other> Requires disk from manufacturer" from the scroll
       list then press [Enter].

   5)  Insert driver diskette in drive (A: or B:); type in the drive and
       pathname (e.g., A:\WINNT or B:\WINNT ) then click OK.

   6)  In the "OEM Option dialog" box, the following will be displayed:

		32-bit IO Mode PCI Ethernet Adapter


   7)  Driver installation is completed.  The newly installed adapter card
       type and driver will now become part of the network system software.

	       "[0x]32-bit IO Mode PCI Ethernet Adapter Driver"

       will be listed in the Installed Adapter Cards menu and

   8)  At this stage, the SETUP program has already transferred the
       following files:

       filename 	source directory	target directory
       ======== 	================	================
       EN1208.SYS	A:\WINNT or B:\WINNT	C:\WINNT\SYSTEM32\DRIVER
       OEMSETNT.INF	A: or B:		C:\WINNT\SYSTEM32

       NOTICE:	C:\WINNT is the directory where your NT O.S. is located.

   9)  Finally, complete the network installation process, bind the
       adapter to transport drivers by choosing "Bindings" button under
       Network Setting dialog box.

  10)  Reboot your system for the changes to take effect.


**>  Trademarks  <**
Microsoft Windows NT is a trademark of Microsoft Corporation.

All trademarks or brand names mentioned are trademarks or registered
trademarks of their respective companies.



|<<<  THE END  >>>|

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.43