Accton EN2212 Ethernet PCMCIA Adapter NDIS Driver for SUN PC-NFS Installation ========================================= The driver ETHPCM.DOS contained in directory \NDIS\DOS is used with Accton Ethernet PCMCIA adapters in the SUN PC-NFS environment. This driver conforms to the Network Driver Interface Specification (NDIS) 2.0 defined by Microsoft/3Com. 1. INSTALLATION PROCEDURE ========================= a. Add "Device=c:\dos\ansi.sys" in CONFIG.SYS. Reboot the PC. b. Insert the PC-NFS Installation diskette in the diskette drive (A: or B:) and type: install <Enter>. c. Enter the destination drive letter (e.g. C:). Press <Enter>. d. Select "Ethernet" and press <Enter>. e. Select the "NDIS" option from the "Ethernet Adapter" menu. f. Enter proper responses to all the prompts. g. Specify the PC name, IP address, server name, and server IP address. h. Follow all the prompts to finish the installation. i. The system create \LANMAN and \NFS directory on the destination drive. j. After completed, copy the ETHPCM.DOS file from subdirectory \MSLANMAN.DOS\DRIVERS\ACCTON\ACCNE on the Accton driver program diskette to the \LANMAN (C: or D:) directory on the destination drive. k. Use a text editor, edit the config.sys. Add this line above the NFS_NDIS driver specification: DEVICE=C:\LANMAN\ETHPCM.DOS l. Edit the protocol.ini file in the \LANMAN directory. 1). Replace [your-mac-module] with [ETHPCM] 2). Replace drivername = YOURMAC$ with drivername = ETHPCM$ Specify the correct IRQ and IOBASE values (May be omitted) for this adapter depending on the adapter's setting: IRQ = 5 IOBASE = 0x300 ... 3). Replace bindings = YOUR-MAC-MODULE with bindings = ETHPCM$ m. Reboot the computer. n. Execute NFSCONF.EXE to configure the system (e.g. Mount a virtual drive E:). Execute TELNET.EXE to do terminal emulation. Sample configuration files: 2. Config.sys shell=c:\command.com /P /E:526 dos=high, UMB rem ----pcnfs install Device=c:\dos\ansi.sys DEVICE=C:\NFS\PCNFS.SYS /m DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\LANMAN\ACCOPEN.EXE /port=300 /int=5 DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN --> specify PROTOCOL.INI directory. device=C:\LANMAN\ETHPCM.DOS -----------> Accton NDIS driver name DEVICE=C:\LANMAN\NFS-NDIS.SYS FILES=50 BUFFERS=50 LASTDRIVE=v STACKS=9,256 3. Protocol.ini at \LANMAN directory [protocol manager] drivername = PROTMAN$ [ETHPCM] drivername = ethpcm$ irq = 5 iobase = 0x300 [NFS-NDIS] drivername = NFSLINK1 bindings = ETHPCM 4. Autoexec.bat ... SET TZ=PST8 SET path=C:\;C:\NFS;C:\LANMAN SET NFSDRIVE=D C:lanman\netbind ----> Add this line to Bind NDIS driver PRT * NFSRUN -- THE END --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.