Accton Technology Corporation
EN2216/2316 PCMCIA Ethernet Adapter
Windows for Workgroups 3.11 Driver Installation
Contents:
--------
A) Install NDIS 2.0 driver for WFW 3.11
B) EN2216/2316 Enabler Program ACCOPEN.EXE
C) Install NDIS 3.0 driver for WFW 3.11
If you installed EMM386.EXE in CONFIG.SYS, please exclude memory
address range D000-DFFF from EMM386.EXE. The EN2216/2316 driver
uses this 64K bytes of memory space to read information stored on
the adapter.
[Example]
DEVICE=EMM386.EXE NOEMS X=D000-DFFF
A) Install NDIS 2.0 driver for WFW 3.11
The driver "ETHPCM.DOS" contained in directory
\NDIS conforms to the Network Driver Interface
Specification (NDIS) 2.0 defined by Microsoft/3Com.
NDIS 2.0 Driver Installation for Windows for Workgroups
-------------------------------------------------------
1. Start Windows by typing WIN from the DOS prompt.
2. Click the "Network" icon in the Main Program
Group.
3. Click the "Network Setup" icon from the Network window.
4. Select the "Drivers" item from the Network Setup dialog box.
5. Select the "Add Adapters" item in the Option dialog box.
6. Select "Unlisted or Updated Network Adapter" when the
Install driver field appears.
7. Type destination drive and path name on your PC.
Make sure the full path of the directory (i.e. A:\NDIS)
is given.
8. Insert the Driver Diskette in your floppy drive
and press <Enter> to start the installation process.
9. When the "Accton EN2216/2316 Ethernet PCMCIA Adapter -16" dialog box appears,
select the right interrupt number and I/O address.
10. Follow on-screen instructions to complete the process.
11. Restart your computer.
Sample Configuration Files
--------------------------
1. CONFIG.SYS File
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\WFW311\HIMEM.SYS
DEVICE=C:\WFW311\IFSHLP.SYS
DOS=HIGH,UMB
FILES=30
buffers=30
FCBS=16,8
LASTDRIVE=y
2. AUTOEXEC.BAT File
C:\WFW311\net start
C:\WFW311\SMARTDRV.EXE
@ECHO OFF
PROMPT $p$g
PATH C:\WFW311;
SET TEMP=C:\WFW311\TEMP
3. PROTOCOL.INI File on Windows for Workgroups 3.11
[network.setup]
version=0x3110
netcard=ethpcmd,1,ethpcmd,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,NETBEUI
lana0=ethpcmd,1,ms$netbeui
lana1=ethpcmd,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=PCMCIAD
[NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=PCMCIAD
LANABASE=0
[EN2216D]
DriverName=ETHPCM$
IRQ = 5 ------- See Notes
IOBASE = 0x300 ------- See Notes
B) EN2216/2316 Enabler Program ACCOPEN.EXE
ACCOPEN.EXE is the EN2216/2316 MS-DOS enabler program. You
have to run ACCOPEN.EXE to enable the EN2216/2316 adapter before
loading the WFW 3.11 NDIS3 driver. You do not use ACCOPEN.EXE with
the NDIS2 driver.
The syntax to load ACCOPEN in CONFIG.SYS:
DEVICE=C:\WFW311\ACCOPEN.EXE [/INT:x][/PORT:xxx]
* INT - interrupt (IRQ) number to be used by EN2216/2316.
This number must not be in use by any other device
in the system.
* PORT- Starting I/O port address in hexadecimal format.
EN2216/2316 requires 32 consecutive free I/O port
addresses, and these set of addresses cannot be used
by any other device in the system.
The default value for IRQ is 5. The default value for IOP is
300 (hexadecimal).
Example: The following command enables EN2216/2316 with IRQ 3 and
I/O port address 320:
DEVICE=C:\WFW311\ACCOPEN.EXE [/INT:3][/PORT:320]
C) Install NDIS 3.0 driver for WFW 3.11
The driver "PCM311.386" contained in directory
\WFW311 conforms to the Network Driver Interface
Specification (NDIS) 3.0 defined by Microsoft.
For the NDIS 3.0 driver for WFW 3.11, the EN2216/EN2316 Adapter must
be enabled by the enabler, ACCOPEN.EXE first. Please refer to the
ACCOPEN.EXE section in this document for more information.
NDIS 3.0 Driver Installation for Windows for Workgroups 3.11
------------------------------------------------------------
1. Run Windows by typing WIN from the DOS prompt.
2. Click the "Network" icon in the Main Program
Group.
3. Click the "Network Setup" icon from the Network window.
4. Select "Networks" in the Network Setup window.
5. Select "Install Microsoft Windows Network" from the Networks window.
6. Select "Drivers" from the Network Setup window.
7. Select "Add Adapter" item in the Option Dialog box.
8. Select the "Unlisted or Updated Network Adapter" when the
Install driver field appears.
9. Type destination drive and path name in your PC.(i.e. A:\)
10. Insert the PCMCIA Driver Disk in your floppy drive
and press <Enter> to start the installation process.
11. When the "Accton EN2216/2316 Ethernet PCMCIA Adapter" dialog box
appears, select the right interrupt number; I/O address and select
"Close". Please watch out the values you selected for the interrupt
number and I/O address must match the same values that you set for
ACCOPEN.EXE.
12. Copy the EN2216/2316 enabler program ACCOPEN.EXE from the driver disk
to the hard disk.
13. Modify the CONFIG.SYS or AUTOEXEC.BAT file to add the ACCOPEN.EXE
statement. Please refer to the sample files below.
14. Follow the on-screen instructions to complete the process.
Sample Configuration Files
--------------------------
1. CONFIG.SYS File
FILES=30
BUFFERS=30
LASTDRIVE=Z
DEVICE=C:\WFW311\HIMEM.SYS
DEVICE=EMM386.EXE NOEMS X=D000-DFFF
DEVICE=C:\WFW311\ACCOPEN.EXE /INT=5 /PORT=300 <-- PCMCIA Adapter enabler
DEVICE=C:\WFW311\IFSHLP.SYS
STACKS=9,256
2. AUTOEXEC.BAT File
C:\WFW311\SMARTDRV.EXE
C:\WFW311\net start
PATH C:\WFW311;
SET TEMP=C:\WFW311\TEMP
3. PROTOCOL.INI File on Windows for Workgroups 3.11
[network.setup]
version=0x3110
netcard=ms$ethpcm,1,MS$ethpcm,2
transport=ms$netbeui,NETBEUI
lana0=ms$ethpcm,1,ms$netbeui
[MS$ethpcm]
DriverName=MS2000$
INTERRUPT=5
IOBASE=0x300
[PCMCIA]
adapters=MS$ethpcm
[NETBEUI]
BINDINGS=MS$ethpcm
LANABASE=0
SESSIONS=10
NCBS=12
4. SYSTEM.INI
[386Enh]
netcard=pcm311.386
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.