Accton Technology Corporation
EN2216/2316 PCMCIA Ethernet Adapter
IBM OS/2 ODI Driver Installation
The following is a sample NET.CFG to use with the IBM OS/2 ODI driver.
Note you must specify the "NODE ADDRESS" parameter in the NET.CFG
file. This parameter specifies the Ethernet MAC Address of the
EN2216/2316 Adapter. You can find this address on the label at the back of the adapter.
You can also execute the Adapter Test and Diagnostic program, ACCTEST.EXE, under a native DOS system (not in a OS/2 DOS box) to find this address.
The PORT keywords specifies the starting I/O address to be used by
the Adapter. The EN2216/2316 Adapter requires a range of
32 consecutive I/O addresses. This range of addresses must not be in
use by another device in the system.
The INT keyword specifies the Interrupt (IRQ) value to be used by
the EN2216/2316 Adapter. This IRQ must not be in use by any other
device in the system.
Sample NET.CFG file:
LINK DRIVER PCMODIC
PORT 300
INT 3
FRAME ETHERNET_802.3
FRAME ETHERNET_802.2
NODE ADDRESS 0000E811FF97
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.