1. 2x16_v200.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (2x16_v200.zip)

		      Accton Technology Corporation
		   EN2216/2316 PCMCIA Ethernet Adapter
		    NDIS Driver Installation Overview

File Descriptions:

    \MSLANMAN.DOS\DRIVERS\PCMCIA\ACCNE\
    ETHPCM.DOS		    The DOS NDIS MAC driver
    PROTOCOL.INI	    A sample section of a PROTOCOL.INI file

    \MSLANMAN.DOS\DRIVERS\NIF\
    ACCNE.NIF		   Network Information File

    \NDIS\
    README.TXT		   This file

    \NDIS\DOS\
    EN2216D.NIF 	   Network Information File for LAN Server (DOS)
    ETHPCM.DOS		   The DOS NDIS MAC driver
    OEMSETUP.INF	   Network Information File for Windows for Workgroups
    PROTOCOL.INI	   Sample File For Windows for Workgroups.

    \NDIS\OS2\
    ETHPCM.OS2		   The OS/2 2.1 MAC driver
    EN2216O.NIF 	   Network Information File for LAN Server (OS/2)
    PROTOCOL.INI	   Sample File For LAN Server (OS/2).

    \NDIS\
    WFW.TXT		Installing Windows for Workgroups

    \NDIS\
    LANMAN.TXT		Installing MicroSoft's Lan Manager.

    \NDIS\
    LANSVR.TXT		Installing IBM's Lan Server

1. Installation Procedure

   The instruction to install the driver is summarized in the README.TXT
   file under each product's subdirectory.

2. Sample protocol.ini file and parameters

[ACCNE_NIF]

;  Default section of protocol.ini file 

    drivername = ETHPCM$
    irq = 5
    iobase = 0x300

; End of this sample file

Several parameters are included in the ACCNE_NIF section of the
PROTOCOL.INI file.  However, the only required parameter
is the "drivername".  The other parameters can use the
default values.

irq	    Specifies the interrupt channel used by the adapter.
	    Acceptable values for this parameter are 2, 3, 4, 5,
	    10, 11, 12, and 15.

iobase	    Specifies the iobase address used by the adapter.
	    This parameter is given in hexadecimal values.
	    Acceptable value for this parameter are 0x240, 0x280,
	    0x2C0, 0x300, 0x320, 0x340, 0x360.


3. Additional Parameters in the protocol.ini file for
the Accton NDIS Driver Configuration:

  Keyword	     Parameter

MaxMultiCast  1 .. 1000  Default 10
	      Maximum number of MultiCast Addresses.
	      This configures the size of the MultiCast
	      Address Table.


MaxRequests   6 .. 64  Default 8
	      Maximum number of outstanding General Requests.
	      This configures the size of the General Request
	      Queue.


MaxTransmits  6 .. 64  Default 12
	      Maximum number of outstanding TransmitChain commands.
	      This configures the size of the TransmitChain Request
	      Queue.


ReceiveChains 6 .. 96  Default 12
	      Maximum number of outstanding ReceiveChain commands.
	      This configures the size of the ReceiveChain Request
	      Queue.


ReceiveBuffers6 .. 96  Default 12
	      Configures the number of the Receive buffers in the
	      Receive Buffer Pool.


TransmitBufSize 128 .. 1514  Default 1514
	      Configures the size (in bytes) of buffers in the
	      Transmit Buffer Pool.



*****
Note  :  Values for the preceding parameters are seldom changed by
	the user.  Most of the time, the default values are used.
*****

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.