1. 2x16_v200.zip Driver
  2. ACCPCM.INF File Contents

ACCPCM.INF Driver File Contents (2x16_v200.zip)

 DOWNLOAD NOW
ACCPCM.INF Driver Update Utility 
; ACCPCM.INF
;
; Accton EN2216/2316 Network Interface Cards.
;
; Version = 2.00
; CopyRight = Copyright Accton Technology Corp. 2001 All Rights Reserved


[version]
InfVersion=00.02.00
signature=$Windows95$
Class=Net
provider=%V_N%

;****************************************************************************
;   Manufacturer Section
;****************************************************************************
[Manufacturer]
%V_Accton%=Accton

;****************************************************************************
;   Manufacturer Name Section
;****************************************************************************
[Accton]
%ACC2216.DeviceDesc%=*ACC2216.Ndi, PCMCIA\ACCTON-EN2216-PCMCIA-ETHERNET-2909    ; Accton EN2216/2316 PCMCIA

;****************************************************************************
;   INF INSTALL SECTION
;****************************************************************************
;****************************************************************************
;    Accton EN2216/2316 PCMCIA   (C, DOS ODI)
;****************************************************************************
[*ACC2216.Ndi]
;; AddReg=ProdId,InstallReg,GenericParamBlk,SpecificParmBlk,ResourceReg,NovellODIEtherGeneric,LogConfig
AddReg=*ACC2216.Ndi.reg, ACC16.Ndi.reg, SLOT.reg, pcACC16.params.reg, ODI.Common.CFG.reg
;;LogConfig=*ACC2216.LogConfig

;****************************************************************************
;   .REG (Device IDs)
;****************************************************************************
[*ACC2216.Ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\ACCTON-EN2216-PCMCIA-ETHERNET-2909"
HKR,Ndi,CardType,,"PCMCIA"

;****************************************************************************
;   .REG Common Settings for all EN166X PnP drivers
;****************************************************************************
[ACC16.Ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*odiload
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"

; Ndi section
HKR,Ndi,NdiInstaller,,"odipage.dll,odiNdiproc"

; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"odinsup,NovellODI32"
HKR,Ndi\Interfaces,UpperRange,,"odinsup,NovellODI32"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"

; Install section
HKR,Ndi\Install,"16 Bit",,"ACC16.ODI16.Install"
HKR,Ndi\Install,"32 Bit",,"ACC16.ODI32.Install"

; Remove section
HKR,Ndi\Remove,"16 Bit",,"ACC16.ODI16.Remove"

; ODI 16 Bit info
HKR,"ODI\16 Bit",ModulePath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\16 Bit",Modules,,"LSLC32.NLM,PC32MLID.LAN"
HKR,"ODI\16 Bit",DriverPath,,"%24%%DRIVER_16_PATH%"
HKR,"ODI\16 Bit",NetcfgPath,,"%24%%DRIVER_16_PATH%"
HKR,"ODI\16 Bit",NetcfgFileName,,"Net.cfg"
HKR,"ODI\16 Bit",FileName,,"pcmmlid.com"
HKR,"ODI\16 Bit",LinkDriver,,"pcmmlid"

; ODI 32 Bit Info
HKR,"ODI\32 Bit",ModulePath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\32 Bit",Modules,,"LSLC32.NLM,CMSM.NLM,ETHERTSM.NLM"
HKR,"ODI\32 Bit",DriverPath,,"%24%%DRIVER_32_PATH%"
HKR,"ODI\32 Bit",FileName,,"ACCPCM.lan"

HKR,NDI,CardType,,"PCMCIA"

;****************************************************************************
;   .LogConfig Sections
;****************************************************************************
;   EN2216/2316 PCMCIA
[*ACC2216.LogConfig]
IRQConfig=3,4,5,9,10,11,12,15
IOConfig=20@200-3FF%FFE0(3FF::)
;MemConfig=4000@C8000-FFFFF%FFFFC000
;ConfigPriority=HARDRECONFIG

;****************************************************************************
;   Install Section
;****************************************************************************
[ACC16.ODI16.Install]
CopyFiles=ACC16.ODI16.CopyFiles
UpdateAutoBat=ACC16.ODI16.autobat

[ACC16.ODI32.Install]
CopyFiles=ACC16.ODI32.CopyFiles
UpdateAutoBat=ACC16.ODI32.autobat

[ACC16.ODI16.autobat]
CmdDelete=LSL
CmdDelete=N16ODI
CmdDelete=NESL
CmdDelete=PCMMLID
CmdDelete=ODIHLP
CmdAdd=LSL.COM,  "-c=%24%%DRIVER_16_PATH%NET.CFG"
CmdAdd=N16ODI.COM
CmdAdd=NESL.COM
CmdAdd=PCMMLID.COM

[ACC16.ODI32.autobat]
CmdDelete=LSL
CmdDelete=N16ODI
CmdDelete=NESL
CmdDelete=ACCPCM
CmdDelete=ODIHLP

;****************************************************************************
;   Remove Section
;****************************************************************************
[ACC16.ODI16.Remove]
UpdateAutoBat=ODI16.AutoBatRemove

[ODI16.AutoBatRemove]
CmdDelete=LSL
CmdDelete=N16ODI
CmdDelete=NESL
CmdDelete=PCMMLID

;****************************************************************************
;Common Params
;****************************************************************************
[ACC16.params.reg]
;; Resources
HKR,,IRQ,1,04,00,00,00                  ;; uncomment by ProChao, 06/11/96
HKR,Ndi\params\IRQ,resc,1,04,00,00,00
HKR,Ndi\params\IRQ,ParamDesc,,"IRQ Level"
HKR,Ndi\params\IRQ,flag,1,60,00,00,00

HKR,,Port,1,02,00,00,00                 ;; uncomment by ProChao, 06/11/96
HKR,Ndi\params\Port,resc,1,02,00,00,00
HKR,Ndi\params\Port,ParamDesc,,"I/O Port Address"
HKR,Ndi\params\Port,flag,1,20,00,00,00

;****************************************************************************
; Additional settings for PCMCIA EN2216/2316 Drivers
;****************************************************************************
[pcACC16.params.reg]
; Resources
HKR,,IRQ,1,04,00,00,00
HKR,,Port,1,02,00,00,00
HKR,,AttributeBase,1,01,00,00,00

; OVERRIDE FOR 16K RAM WINDOW
;HKR,Override,0000,1,\
;
;00,04,00,00, \      ; CONFIGMG_VERSION
;00,00,00,00, \      ; PRIORITY
;
; I/O Resource Descriptor
;
;24,00,00,00, \      ; Total length of I/O Resource Descriptor
;02,00,00,00, \      ; ResType_IO = 0x00000002
;01,00, \            ; IOD_Count;
;0C,00, \            ; IOD_Type;         // IOType_Range = 0x000C
;00,00, \            ; IOD_Alloc_Base;
;00,00, \            ; IOD_Alloc_End;
;00,00, \            ; IOD_DesFlags;
;00, \               ; IOD_Alloc_Alias;
;00, \               ; IOD_Alloc_Decode;
;E0,FF, \            ; IOR_Align;        // Mask for base alignment
;20,00, \            ; IOR_nPorts;       // Number of ports
;00,00, \            ; IOR_Min;          // Min port address
;FF,FF, \            ; IOR_Max;          // Max port address
;00,03, \            ; IOR_Min;          // Min port address
;7F,03, \            ; IOR_Max;          // Max port address
;00,00, \            ; IOR_RangeFlags;   // Flags
;00, \               ; IOR_Alias;        // Alias offset
;00, \               ; IOR_Decode;       // Address specified
;45,00,00,00, \      ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
;14,00,00,00, \      ; Total length of IRQ Resource Descriptor
;04,00,00,00, \      ; ResType_IRQ = 0x00000004
;00,00, \            ; IRQD_Flags;
;00,00, \            ; IRQD_Alloc_Num;   // Allocated IRQ number
;FF,FF, \            ; IRQD_Req_Mask;    // Mask of possible IRQs
;00,00, \            ; IRQD_Reserved;
;70,00,00,00, \      ; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 0
;
;34,00,00,00, \      ; Total length of Memory Resource Descriptor
;01,00,00,00, \      ; ResType_Mem = 0x00000001
;01,00, \            ; MD_Count;
;14,00, \            ; MD_Type;          // MType_Range = 0x0014
;00,00,00,00, \      ; MD_Alloc_Base;
;00,00,00,00, \      ; MD_Alloc_End;
;00,00, \            ; MD_Flags;
;00,00, \            ; MD_Reserved;
;00,F0,FF,FF, \      ; MR_Align;         // Mask for base alignment
;00,10,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
;00,00,00,00, \      ; MR_Min;           // Min Address
;FF,FF,FF,FF, \      ; MR_Max;           // Max Address
;00,00, \            ; MR_Flags;         // Flags
;00,00, \            ; MR_Reserved;
;02,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
                    ;               0x08 = 16-bit common mem
;00,00,00,00, \      ; Memory card address
;
; Memory Resource Descriptor 1
;
;34,00,00,00, \      ; Total length of Memory Resource Descriptor
;01,00,00,00, \      ; ResType_Mem = 0x00000001
;01,00, \            ; MD_Count;
;14,00, \            ; MD_Type;          // MType_Range = 0x0014
;00,00,00,00, \      ; MD_Alloc_Base;
;00,00,00,00, \      ; MD_Alloc_End;
;00,00, \            ; MD_Flags;
;00,00, \            ; MD_Reserved;
;00,C0,FF,FF, \      ; MR_Align;         // Mask for base alignment
;00,40,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
;00,00,00,00, \      ; MR_Min;           // Min Address
;FF,FF,FF,FF, \      ; MR_Max;           // Max Address
;00,00, \            ; MR_Flags;         // Flags
;00,00, \            ; MR_Reserved;
;08,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
                    ;               0x08 = 16-bit common mem
;00,10,01,00, \      ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
;19,00,00,00, \      ; Total length of REQUEST_CONFIG_PKT Descriptor
;7C,89,00,00, \      ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
;00,00, \            ; Socket;
;02,00, \            ; Attributes;
;32, \               ; Vcc;
;32, \               ; Vpp1;
;32, \               ; Vpp2;
;02, \               ; IntType;
;00,00,02,00, \      ; ConfigBase;
;00, \               ; Status;
;00, \               ; Pin;
;00, \               ; Copy;
;01, \               ; ConfigIndex;
;0B, \               ; Present;
;
;00,00,00,00         ; TERMINATOR


;****************************************************************************
;   general Ethernet Frame-Type params
;****************************************************************************
[ODI.Common.CFG.reg]
; First Logical Board
HKR,Ndi\params\Frame1,ParamDesc,,"1. Frame Type"
HKR,Ndi\params\Frame1,default,,1
HKR,Ndi\params\Frame1,type,,enum
HKR,Ndi\params\Frame1,optional,,0
HKR,Ndi\params\Frame1\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame1\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame1\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame1\enum,4,,"Ethernet_802.3"

; Second Logical Board
HKR,Ndi\params\Frame2,ParamDesc,,"2. Frame Type"
HKR,Ndi\params\Frame2,default,,2
HKR,Ndi\params\Frame2,type,,enum
HKR,Ndi\params\Frame2,optional,,0
HKR,Ndi\params\Frame2\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame2\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame2\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame2\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame2\enum,5,,"Not used"

; Third Logical Board
HKR,Ndi\params\Frame3,ParamDesc,,"3. Frame Type"
HKR,Ndi\params\Frame3,default,,3
HKR,Ndi\params\Frame3,type,,enum
HKR,Ndi\params\Frame3,optional,,0
HKR,Ndi\params\Frame3\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame3\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame3\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame3\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame3\enum,5,,"Not used"

; Fourth Logical Board
HKR,Ndi\params\Frame4,ParamDesc,,"4. Frame Type"
HKR,Ndi\params\Frame4,default,,4
HKR,Ndi\params\Frame4,type,,enum
HKR,Ndi\params\Frame4,optional,,0
HKR,Ndi\params\Frame4\enum,1,,"Ethernet_802.2"
HKR,Ndi\params\Frame4\enum,2,,"Ethernet_SNAP"
HKR,Ndi\params\Frame4\enum,3,,"Ethernet_II"
HKR,Ndi\params\Frame4\enum,4,,"Ethernet_802.3"
HKR,Ndi\params\Frame4\enum,5,,"Not used"

; Node Address Override
HKR,Ndi\params\"Node Address",ParamDesc,,"Node Address Override"
HKR,Ndi\params\"Node Address",type,,edit
HKR,Ndi\params\"Node Address",LimitText,,18
HKR,Ndi\params\"Node Address",UpperCase,,1
HKR,Ndi\params\"Node Address",default,,""
HKR,Ndi\params\"Node Address",flag,1,20,00,00,00
HKR,Ndi\params\"Node Address",optional,,1

; Bus Name
;;HKR,Ndi\params\"BUS",ParamDesc,,"Bus Name"
;;HKR,Ndi\params\"BUS",type,,edit
;;HKR,Ndi\params\"BUS",LimitText,,32
;;HKR,Ndi\params\"BUS",UpperCase,,1
;;HKR,Ndi\params\"BUS",default,,""
;;HKR,Ndi\params\"BUS",optional,,1

; Slot Number
;HKR,Ndi\params\"SLOT",ParamDesc,,"Slot Number"
;HKR,Ndi\params\"SLOT",default,,1
;HKR,Ndi\params\"SLOT",type,,int
;HKR,Ndi\params\"SLOT",min,,1
;HKR,Ndi\params\"SLOT",max,,65535
;HKR,Ndi\params\"SLOT",step,,1
;HKR,Ndi\params\"SLOT",optional,,1
;HKR,Ndi\params\"SLOT",flag,1,20,00,00,00
;
; Help section
HKR,Ndi,HelpText,,%ODIMLID_HELP%

[SLOT.reg]
; Adapter Slot Number
HKR,Ndi\params\Slot,ParamDesc,,"Slot Number"
HKR,Ndi\params\Slot,type,,int
HKR,Ndi\params\Slot,default,,1
HKR,Ndi\params\Slot,min,,1
HKR,Ndi\params\Slot,max,,65535
HKR,Ndi\params\Slot,step,,1
HKR,Ndi\params\Slot,optional,,1
HKR,Ndi\params\Slot,HIN,,""

;****************************************************************************
; File to be copied
;****************************************************************************
[ACC16.ODI32.CopyFiles]
ACCPCM.LAN,,,5

[ACC16.ODI16.CopyFiles]
pcmmlid.com,,,5
LSL.com,,,5
N16ODI.COM,,,5
NESL.COM,,,5
;LSL.msg,,,5
;NESL.msg,,,5

;****************************************************************************
; Source Disk Names & Source Disk Files
;****************************************************************************
[SourceDisksNames]
42=%DSK_ACCTON4%,"",0004

[SourceDisksFiles]
ACCPCM.LAN   =42
pcmmlid.com    =42
LSL.com       =42
N16ODI.COM    =42
NESL.COM      =42
;LSL.msg       =42
;NESL.msg      =42

;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinatioNdirs]
DefaultDestDir               =11 ; LDID_SYS
ACC16.ODI32.CopyFiles       =24,novell\client32
ACC16.ODI16.CopyFiles       =24,novell\nwclient

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_N=" Accton"

; Manufacturers
V_Accton="Accton"

;Paths to drivers
DRIVER_32_PATH="novell\client32\"
DRIVER_16_PATH="novell\nwclient\"
DSK_ACCTON4="The Accton NetWare Client-32 disk for EN2216/2316 PCMCIA ethernet adapter"

; Accton PCMCIA Devices
ACC2216.DeviceDesc="Accton EN2216/2316 Ethernet PCMCIA Card"

; Context help
ODIMLID_HELP="Accton ODI driver enables you to use either 16-Bit or 32-Bit networking components."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 2.03