NETWARE.TXT Driver File Contents (en1650n.zip)

	   Accton Technology Corporation
	NETWARE DRIVER INSTALLATION OVERVIEW
	====================================

Copyright (c) 1992, 1993 by Accton Technology
Corporation. All rights reserved.

This file describes the contents of the \NETWARE
subdirectory. For more detailed information about
NetWare installation, please refer to the
"NOVELL NetWare ODI Shell for DOS" manual.

List Of Files You Need
----------------------

------------------------------------------------------
Filename	Description
------------------------------------------------------
LSL.COM 	This file implements the Link Support
		Layer  for  DOS ODI workstations
		and is	the program that is generally
		loaded first when booting. The Link
		Support Layer file enables the
		workstation to communicate over
		several protocols.

IPXODI.COM	This is Novell's protocol stack for
		DOS ODI workstations. It performs
		the same functions as the IPX.COM, which
		is used for DOS workstations. However
		it is optional and is loaded after the
		LAN driver. Other protocols can be loaded
		in its place or with it. This is one
		of the key features of the ODI
		environment.

NETx.COM	NetWare Network program.
		--------------------------------------
		If you use		  You Need
		--------------------------------------
		Conventional memory	  NETx.COM

		Expanded memory 	  EMSNETx.EXE
		(LIM 4.0 EMS Compatible)

		Extended memory 	  XMSNETx.EXE
		(XMS 2.0 compatible)
		---------------------------------------

NETBIOS.EXE	The Netbios emulation program
		(INT 5CH interface) allows you to
		run Netbios  application programs
		based  on  the NETBIOS.EXE
		interface. The running sequence is:

		a. IPX shell driver
		   IPX.COM
		   NETBIOS.EXE	---> netbios emulation
		   ...		     interface

		b. DOS ODI driver
		   LSL.COM
		   NWMLID.COM	---> Accton DOS ODI driver
		   IPXODI.COM
		   NETBIOS.EXE
		   ...
------------------------------------------------------------


For MS-DOS V6.X And The Later
-----------------------------
NETX will check the current DOS version. It support MS-DOS until V6.0. IF
you use the later version with this NETX, please add a command, "SETVER", in
your CONFIG.SYS file. It is included in your DOS utilities and can cover the
problem about DOS version.


===End===



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.77