;***********************************************************************
;
; OEMSETUP.INF
;
; Accton ISA card INF for Novell ODI drivers
;
;
;***********************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
"Jazz-Internal Bus"
[LanguagesSupported]
ENG
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
NwSubsInf = "NWSUBS.INF"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Accton"
ProductMajorVersion = "1"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
DriverName = "OdiLoad"
OdiModules = "ODI_Modules"
NetRuleHardwareType = "nwDriver nwAdapter"
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(DriverName)"\CurrentVersion"
;
; ParamKeyname not used - not updated
; ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardware$(Option)Name)"\Parameters"
;
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\netware
[ODIParameters]
ODINodeAddress = ""
ODIDriverAdditionalParms = {}
ODICustomList = {}
ODITokenRing = ""
ODITokenRingSnap = ""
;
; File specific Parameters:
; ISA LAN Driver file:
; ODISlotList = {}
; ODIDefaultSlot = ""
; MCA and EISA LAN Driver files:
; ODISlotList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16}
; ODIDefaultSlot = "2"
;
ODISlotList = {}
ODIDefaultSlot = ""
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = {}
ForListDo $(OptionList)
set OptionTempString = " ODI "#($($),Title,1)" Adapter for NetWare"
set OptionTextList = >($(OptionTextList), $(OptionTempString) )
EndForListDo
set Status = STATUS_SUCCESSFUL
Debug-Output "OEMSETUP.INF-[finish_ReturnOptions]:"
Debug-Output "OEMSETUP.INF- Status = "$(Status)
Debug-Output "OEMSETUP.INF- OptionList = "$(OptionList)
Debug-Output "OEMSETUP.INF- OptionTextList = "$(OptionTextList)
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set NdisDriverParameters = $($6)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms ODIParameters
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
; set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
else
set DoCopy = YES
set AddCopy = YES
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set ParameterListNames = ^(DefaultParameterLists, 1) ; NWIRQList, NWMEMList1, etc.
set ListNames = ^(ODIListNamesSection, 1) ; List1, list2, ..., list6
set ODIKeywordList = ^(ChoicesNamesList, 1) ; Int, mem, Port, etc.
set ODITitleList = ^(ChoicesNamesList, 2) ; Interrupt Number, Port, etc.
set MSParameterList = ^(ChoicesNamesList, 3) ; InterruptNumber, IOBaseAddress, etc.
set DriverListNames = {}
set ODINumberofDriverLists = 0
ForListDo ^($(Option),0 )
ifcontains(i) $($) IN $(ListNames)
set DriverListNames = >($(DriverListNames), $($))
else-ifstr(i) $($) == "CUSTOM"
set ODICustomList = #($(Option), Custom, 1)
endif
EndForListDo
QueryListSize ODINumberofDriverLists $(DriverListNames)
;
; DriverListNames now contains the List names the selected ODI driver has (i.e. {List1, List2})
; ODINumberofDriverLists now contains the number of lists used
;
Debug-Output "DriverListNames = "$(DriverListNames)
Debug-Output "Size of DriverListNames = "$(ODINumberofDriverLists)
Debug-Output "NdisDriverParameters = "$(NdisDriverParameters)
ForListDo $(DriverListNames)
set $($)Keyword = #($(Option), $($), 1)
ifstr $($($)Keyword) != ""
set $($)Default = #($(Option), $($), 3)
ifcontains(i) $($($)Keyword) IN $(ODIKeywordList)
set $($)Title = *($(ODITitleList), ~($(ODIKeywordList), $($($)Keyword)))
set ThisListName = #($(Option), $($), 2)
set MSParameterName$(#) = *($(MSParameterList), ~($(ODIKeywordList), $($($)Keyword)))
set FinalList = {}
ifcontains(i) $(ThisListName) IN $(ParameterListNames)
ifstr(i) #($(Option), $($), 4) == "ALL"
set FinalList = ^($(ThisListName), 1)
else
set CountUpTo = #($(Option), $($), 5)
ifstr(i) $(CountUpTo) == "END"
set CountUpTo = $(MAXIMUM_ALLOWED)
endif
set StartNumber = #($(Option), $($), 4))
ForListDo ^($(ThisListName), 1)
ifint $(#) >= $(StartNumber)
ifint $(#) <= $(CountUpTo)
set FinalList = >($(FinalList), $($))
endif
endif
EndForListDo
endif
else
;
; User passed in the list
;
Debug-Output "User passed in a list"
set $($)Title = #($(Option), $($), 2)
set FinalList = #($(Option), $($), 4)
endif
else
;
; User passed in a new keyword
;
Debug-Output "User passed in a new keyword"
set $($)Title = #($(Option), $($), 2)
set MSParameterName$(#) = ""
set FinalList = #($(Option), $($), 4)
endif
set $($)List = $(FinalList)
endif
Debug-Output "List"$(#)"Title = "$($($)Title)
Debug-Output "List"$(#)"Default = "$($($)Default)
Debug-Output "List"$(#)"Keyword = "$($($)Keyword)
Debug-Output "List"$(#)"List = "$($($)List)
Debug-Output "MSParameterName"$(#)" = "$(MSParameterName$(#))
;
; Get the card settings from the Ndis driver service
;
Ifstr(i) $(NdisDriverParameters) != ""
set FoundValueName = "FALSE"
set ListNameDefault = $($)Default
set NdisParameterName = $(MSParameterName$(#))
ForListDo $(NdisDriverParameters)
set ValueList = $($)
Debug-Output "ValueList = "$(ValueList)
Ifstr(i) $(FoundValueName) == "FALSE"
set NdisValueName = *($(ValueList), 1)
Debug-Output "NdisValueName = "$(NdisValueName)
Ifstr(i) $(NdisValueName) == $(NdisParameterName)
Ifstr(i) $(NdisValueName) == "IOBaseAddress"
set-dectohex $(ListNameDefault) = *($(ValueList), 4)
Split-String $($(ListNameDefault)) "x" SplitList
set $(ListNameDefault) = *($(SplitList), 3)
else-ifstr(i) $(NdisValueName) == "MemoryMappedBaseAddress"
set-dectohex $(ListNameDefault) = *($(ValueList), 4)
Split-String $($(ListNameDefault)) "x" SplitList
set $(ListNameDefault) = *($(SplitList), 3)
else
set $(ListNameDefault) = *($(ValueList), 4)
Endif
set FoundValueName = "TRUE"
Debug-Output "NEW: "$(ListNameDefault)" = "$($(ListNameDefault))
Endif
Endif
EndForListDo
Endif
EndForListDo
skipmakingthelists = +
set ODILANDriverTitle = #($(Option), Title, 1)
Split-String #($(Option), DriverName, 2) "." SplitFileNameList
set ODILANDriverName = *($(SplitFileNameList), 1)
set ODIMediaType = #($(Option), MediaType, 1)
Debug-Output "ODILANDriverName = "$(ODILANDriverName)
Debug-Output "ODIMediaType = "$(ODIMediaType)
ifstr(i) $(ODIMediaType) == "ETHERNET"
set NdisMediaType = "1"
else-ifstr(i) $(ODIMediaType) == "TOKEN-RING"
set NdisMediaType = "2"
else-ifstr(i) $(ODIMediaType) == "FDDI"
set NdisMediaType = "4"
else
Debug-Output "OEMSETUP.INF: Unknown media type "$(ODIMediaType)
set NdisMediaType = ""
endif
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Ifstr(i) $(DoCopy) == "YES"
;
; Get source location
;
Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto end
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
goto adapteroptions
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMSETUP.INF: Cannot find component product key "$(!NTN_RegBase)
goto fatalregistry
Endif
Endif
Set AdapterNumber = ""
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: FindService shell failure "$($ShellCode)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "OEMSETUP.INF: FindService Error "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
set ServiceAreaHandle = $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMSETUP.INF: Cannot find component service "$(KeyProduct)
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
GetRegValue $(KeyParameters) ODILoadName ODILoadName
Set CardInstanceName = *($(ODILoadName),4)
Ifstr $(CardInstanceName) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMSETUP.INF: Cannot find CardInstanceName"
goto fatalregistry
endif
set KeyToFind = $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) DriverKey
Ifstr $(DriverKey) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMSETUP.INF: Cannot find component product key = "$(KeyToFind)
goto fatalregistry
Endif
GetRegValue $(DriverKey) Parameters ParameterList
; get the data portion
set ParameterList = *($(ParameterList), 4)
Debug-Output "parameter list = "$(ParameterList)
ForListDo $(ParameterList)
set ThisParameterList = $($)
Split-String $($) " " SplitList
set KeyToSearchFor = *($(SplitList), 1)
set ValueToUse = *($(SplitList), 3)
Debug-Output "Keytosearchfor = "$(KeyToSearchFor)
Debug-Output "ValueToUse = "$(ValueToUse)
;
; #1 #2 #3
; "Parm" " " "Value"
;
set ValueFound = 0
;
; check frametypes for TOKEN-RING, TOKEN-RING_SNAP
;
ifstr(i) $(KeyToSearchFor) == "FRAME"
;
; Don't append Frametypes to ODIAdditionalParms, so set ValueFound = 1
;
set ValueFound = 1
QueryListSize SplitListSize $(SplitList)
ifstr(i) *($(SplitList), 3) == "TOKEN-RING"
set LastParameter = *($(SplitList), $(SplitListSize))
ifstr(i) $(LastParameter) == "MSB"
set ODITokenRing = "MSB"
else-ifstr(i) $(LastParameter) == "LSB"
set ODITokenRing = "LSB"
else
;
; Not there, so default to MSB
;
set ODITokenRing = "MSB"
endif
else-ifstr(i) *($(SplitList), 3) == "TOKEN-RING_SNAP"
set LastParameter = *($(SplitList), $(SplitListSize))
ifstr(i) $(LastParameter) == "MSB"
set ODITokenRingSnap = "MSB"
else-ifstr(i) $(LastParameter) == "LSB"
set ODITokenRingSnap = "LSB"
else
;
; Not there, so default to MSB
;
set ODITokenRingSnap = "MSB"
endif
endif
;
; Check for NODE parameter
;
else-ifstr(i) $(KeyToSearchFor) == "NODE"
set ODINodeAddress = $(ValueToUse)
set ValueFound = 1
;
; Check for SLOT parameter
;
else-ifstr(i) $(KeyToSearchFor) == "SLOT"
set ODIDefaultSlot = $(ValueToUse)
set ValueFound = 1
;
; Check for BUSNAME parameter - ignore it
;
else-ifstr(i) $(KeyToSearchFor) == "BUSNAME"
set ValueFound = 1
;
; Check for BUSTYPE parameter
;
else-ifstr(i) $(KeyToSearchFor) == "BUSTYPE"
set ValueFound = 1
set BusInterfaceType = $(ValueToUse)
;
; Check for BUS parameter
;
else-ifstr(i) $(KeyToSearchFor) == "BUS"
set ValueFound = 1
set BusNumber = $(ValueToUse)
endif
ForListDo $(DriverListNames)
ifstr(i) $(KeyToSearchFor) == $($($)Keyword)
set $($)Default = $(ValueToUse)
set ValueFound = 1
ifcontains(i) $(ValueToUse) NOT-IN $($($)List)
set $($)List = >($($($)List), $(ValueToUse))
endif
endif
EndForListDo
Debug-Output "Value Found = "$(ValueFound)
ifint $(ValueFound) == 0
set FoundInCustom = 0
ForListDo $(ODICustomList)
ifstr(i) $($) == $(ThisParameterList)
set FoundInCustom = 1
endif
EndForListDo
Debug-Output "Found in Custom = "$(FoundInCustom)
ifint $(FoundInCustom) == 0
ifstr $(ODIDriverAdditionalParms) == {}
set ODIDriverAdditionalParms = $(KeyToSearchFor)" "$(ValueToUse)
else
set ODIDriverAdditionalParms = >($(ODIDriverAdditionalParms), $(KeyToSearchFor)" "$(ValueToUse))
endif
endif
endif
EndForListDo
Debug-Output "AdditionalParms = "$(ODIDriverAdditionalParms)
Debug-Output "CustomList = "$(ODICustomList)
Debug-Output "BusType = "$(BusInterfaceType)
Debug-Output "Bus = "$(BusNumber)
adaptersetup =+
goto adapteroptions
adapteroptions = +
set from = adapteroptions
LoadLibrary "NetWare for Windows NT" nwsetup.dll NwLibHandle
SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\english\nwnthelp.hlp" $(!MinimumID) $(!MaximumID)
dothedialog = +
ifint $(ODINumberofDriverLists) == 0
ifstr(i) $(!NTN_InstallMode) == configure
read-syms NoParms$(!STF_LANGUAGE)
ui start "WorkstationDLG" $(NwLibHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "OK hit"
else-ifstr(i) $(DLGEVENT) == "EXIT"
;
; user selected the advanced button
;
goto doadvancedsettings
endif
endif
else
read-syms LANDriverDlg$(!STF_LANGUAGE)
set NotifyFields = {}
set ComboListItemsIn = {}
set ComboListItemsOut = {}
ForListDo $(DriverListNames)
set NotifyFields = >($(NotifyFields), "NO")
set ComboListItemsIn = >($(ComboListItemsIn), $($)List)
ifstr $($($)Value) == ""
set $($)Value = $($($)Default)
endif
set ComboListItemsOut = >($(ComboListItemsOut), $($)Value)
EndForListDo
ui start "LANDriverParms" $(NwLibHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "Continue hit"
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "Action: CANCEL. Bye."
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(NwLibHandle)
goto end
else-ifstr(i) $(DLGEVENT) == "EXIT"
doadvancedsettings =+
;
; user selected the advanced button
;
Debug-Output "Action: ADVANCED DIALOG"
read-syms AdvancedDialog$(!STF_LANGUAGE)
set RadioIn = {}
set ComboListItemsIn = {}
set ComboListItemsOut = {}
set ComboOut = $(ODIDefaultSlot)
ifstr(i) $(ODIMediaType) == "TOKEN-RING"
ifstr(i) $(ODISlotList) == {}
set DlgTemplate = "DLG_ADVANCEDDRIVER3"
else
set ComboListItemsIn = { ODISlotList }
set ComboListItemsOut = { ComboOut }
set DlgTemplate = "DLG_ADVANCEDDRIVER1"
endif
ifstr(i) $(ODITokenRing) == "LSB"
set RadioIn = { 2 }
else
set RadioIn = { 1 }
endif
ifstr(i) $(ODITokenRingSnap) == "LSB"
set RadioIn = >($(RadioIn), "4")
else
set RadioIn = >($(RadioIn), "3")
endif
else
ifstr(i) $(ODISlotList) == {}
set DlgTemplate = "DLG_ADVANCEDDRIVER4"
else
set ComboListItemsIn = { ODISlotList }
set ComboListItemsOut = { ComboOut }
set DlgTemplate = "DLG_ADVANCEDDRIVER2"
endif
endif
ui start "AdvancedDialog" $(NwLibHandle)
ui pop 1
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ODINodeAddress = *($(EditTextOut), 1)
set ODIDefaultSlot = *($(ComboOut), 1)
ifcontains "2" IN $(RadioOut)
set ODITokenRing = "LSB"
else
set ODITokenRing = "MSB"
endif
ifcontains "4" IN $(RadioOut)
set ODITokenRingSnap = "LSB"
else
set ODITokenRingSnap = "MSB"
endif
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "Action: CANCEL. Bye."
endif
goto dothedialog
else
Debug-Output "Action: unknown. Bye."
ui pop 1
FreeLibrary $(NwLibHandle)
goto end
endif
ui pop 1
ForListDo $(DriverListNames)
Debug-Output "List"$(#)"Value = "$($($)Value)
EndForListDo
endif
FreeLibrary $(NwLibHandle)
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: Cannot add hardware component "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMSETUP.INF: Registry error: add hardware component "$(RegistryErrorIndex)
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
Set-add TempAdapterNumber = $(AdapterNumber),0
set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] ODI "$(ODILANDriverTitle)" Adapter for NetWare"},+
{Description,$(NoTitle),$(!REG_VT_SZ),"ODI "$(ODILANDriverTitle)" Adapter for NetWare"},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMSETUP.INF: AddValueList Registry error "$(RegistryErrorIndex)
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}
goto writeparameters
writeparameters = +
Shell $(NwSubsInf), NwGetNICBusInfo, $(CardInstanceName) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: NwGetNICBusInfo ShellCode error "$($ShellCode)
goto ShellCodeError
endif
ifint $($R0) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusNumber = $($R1)
set BusTypeName = $($R2)
set BusInterfaceType = $($R3)
ifstr(i) $(NdisMediaType) == ""
set NdisMediaType = "1"
Debug-Output "OEMSETUP.INF: Media type NOT set"
endif
set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(NdisMediaType)}}
ForListDo $(DriverListNames)
ifstr $(MSParameterName$(#)) != ""
set-hextodec DecValue = $($($)Value)
set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle),$(!REG_VT_DWORD), $(DecValue)}
set NewValueList = >($(NewValueList), $(ValueToAdd))
endif
EndForListDo
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: AddValueList ShellCode error "$($ShellCode)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMSETUP.INF: AddValueList Registry error "$($ShellCode)
goto fatalregistry
endif
EndWait
set PromptForSrcRouting = "FALSE"
Ifstr(i) $(ODIMediaType) == "ETHERNET"
set ODIParmList = {"Frame ETHERNET_802.2", +
"Frame ETHERNET_802.3", +
"Frame ETHERNET_II", +
"Frame ETHERNET_SNAP" +
"BusName "$(BusTypeName) +
"BusType "$(BusInterfaceType) +
"Bus "$(BusNumber) }
else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING"
set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), +
"Frame TOKEN-RING_SNAP "$(ODITokenRingSnap) +
"BusName "$(BusTypeName) +
"BusType "$(BusInterfaceType) +
"Bus "$(BusNumber) }
;If there is an ODI stack available remove the comment on the next line.
;set PromptForSrcRouting = "TRUE"
else-Ifstr(i) $(ODIMediaType) == "FDDI"
set ODIParmList = {"Frame FDDI_802.2", +
"Frame FDDI_SNAP" +
"BusName "$(BusTypeName) +
"BusType "$(BusInterfaceType) +
"Bus "$(BusNumber) }
;If there is an ODI stack available remove the comment on the next line.
;set PromptForSrcRouting = "TRUE"
else
set ODIParmList = {}
endif
Debug-Output "Framenames = "$(ODIParmList)
;
; Build List to send to ODI_MODULES\CARDNAME
;
ForListDo $(DriverListNames)
ifstr $($($)Value) == "Present"
set ODIParmList = >($(ODIParmList), $($($)Keyword))
else-ifstr $($($)Value) != "Not Present"
set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value))
endif
EndForListDo
ifstr $(ODINodeAddress) != ""
set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress))
endif
ifstr $(ODIDefaultSlot) != ""
set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot))
endif
ForListDo $(ODIDriverAdditionalParms)
ifstr $($) != ""
set ODIParmList = >($(ODIParmList), $($))
endif
EndForListDo
ForListDo $(ODICustomList)
ifstr $($) != ""
set ODIParmList = >($(ODIParmList), $($))
endif
EndForListDo
Debug-Output "ODIParmList = "$(ODIParmList)
Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) $(AdapterNumber) $(ODIParmList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: NwAddOdiLoadModule failure "$($ShellCode)
Goto ShellCodeError
Endif
Set ErrorString = $($R0)
Ifstr(i) $(ErrorString) != NO_ERROR
Debug-Output "OEMSETUP.INF: NwAddOdiLoadModule "$(ErrorString)
goto fatalregistry
Endif
Debug-Output "PromptForSrcRouting = "$(PromptForSrcRouting)
Ifstr(i) $(PromptForSrcRouting) == "TRUE"
Shell $(NwSubsInf) NwConfigureSourceRouting "ODI"
Endif
Ifstr(i) $(!NTN_InstallMode) == install
Set OdiAdapterInstalledOkay = "1"
Endif
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: Shell Error NwRemoveAdapter "$($ShellCode)
Endif
Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: NwRemoveNtAdapter "$($ShellCode)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMSETUP.INF: NwRemoveNtAdapter "$(RegistryErrorIndex)
Ifstr(i) $(RegistryErrorIndex) == "SHELL_CODE_ERROR"
goto ShellCodeError
Endif
goto fatalregistry
Endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer) $($)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: NwRemoveNtAdapter "$($ShellCode)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMSETUP.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(Function$(Option)Title)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
; Ifstr(i) $(OdiAdapterInstalledOkay) == "1"
; Shell $(NwSubsInf) GetOdiAdapterList
; ifint $($R3) < 2
; Set DlgType = "MessageBox"
; Set STF_MB_TITLE = "NetWare ODI LAN Drivers Setup"
; Set STF_MB_TEXT = "The NetWare ODI Adapter was successfully installed. "+
; "Your NetWare installation is COMPLETE."
; Set STF_MB_TYPE = 1
; Set STF_MB_ICON = 2
; Set STF_MB_DEF = 1
; ui start "Error Message"
; Endif
; Endif
;
; Check if ODINSUP needs to be installed
;
Shell $(NwSubsInf), CheckIfODINSUPIsNeeded
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionKeyFileToCopyList $(Option) DriverName $(SrcDir)i386\landrv $(!STF_WINDOWSSYSPATH)\netware
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
;[Install-Update]
; set STF_VITAL = ""
; set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;
; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
; AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
;
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
;
; exit
[Source Media Descriptions]
1 = "NetWare ODI LAN Drivers Disk" , TAGFILE = NTCLNT_4
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[DialogConstantsENG]
Help = "&Help"
;Exit = "&Cancel"
OK = "OK"
HelpContext = ""
Continue = "&Continue"
Cancel = "&Cancel"
Advanced = "&Advanced"
IDH_NETWAREWRKSTATIONPARMS = 901
IDH_NETWAREIPXBIND = 902
IDH_IPXSPXPARMS = 903
IDH_NETWORKPROTOCOL = 904
IDH_NETWAREODISETTINGS = 905
IDH_NETWARECLIENTINSTALL = 906
IDH_NETWARENDISODI = 907
IDH_NODEADDRESSOVERIDE = 908
IDH_RESMGRCONFIG = 951
[LANDriverDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "List"$(ODINumberofDriverLists)
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = $(IDH_NETWAREODISETTINGS)
[NoParmsENG]
DlgType = "RadioCombination"
DlgTemplate = "NO_PARAMETERS"
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = ""
CBOptionsGreyed = {}
ComboListItemsIn = {}
ComboListItemsOut = {}
NotifyFields = {}
[AdvancedDialogENG]
DlgType = "RadioCombination"
Caption = "Advanced Settings"
EditTextIn = $(ODINodeAddress)
EditTextLim = 13
CBOptionsGreyed = {}
HelpContext = $(IDH_NODEADDRESSOVERIDE)
NotifyFields = {}
[FileConstantsENG]
ProCaption = "NetWare ODI LAN Drivers Setup"
ProCancel = "Cancel"
ProCancelMsg = "NetWare for Windows NT is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[ChoicesNamesList]
"Int", "Interrupt Number", "InterruptNumber"
"Port", "Port", "IOBaseAddress"
"Mem", "Memory Address", "MemoryMappedBaseAddress"
"Dma", "DMA Channel", "DMAChannel"
[ODIListNamesSection]
List1
List2
List3
List4
List5
List6
[DefaultParameterLists]
NWIRQList1
NWIRQList2
NWIRQList3
NWIRQList4
NWIRQList5
NWIRQList6
NWPORTList1
NWPORTList2
NWPORTList3
NWPORTList4
NWPORTList5
NWPORTList6
NWPORTList7
NWDMAList1
NWMEMList1
[NWIRQList1]
Num1 = 2
Num2 = 3
Num3 = 4
Num4 = 5
Num5 = 6
Num6 = 7
Num7 = 9
Num8 = A
Num9 = B
Num10 = F
[NWIRQList2]
Num1 = 3
Num2 = 4
Num3 = 5
Num4 = 9
[NWIRQList3]
Num1 = 3
Num2 = 4
Num3 = 5
Num4 = 6
Num5 = 7
Num6 = 9
Num7 = A
Num8 = B
Num9 = C
Num10 = F
[NWIRQList4]
Num1 = 3
Num2 = 4
Num3 = 5
Num4 = 7
Num5 = 9
Num6 = A
Num7 = B
Num8 = F
[NWIRQList5]
Num1 = 3
Num2 = 4
Num3 = 5
Num4 = 6
Num5 = 7
Num6 = 9
Num7 = A
Num8 = B
Num9 = C
[NWIRQList6]
Num1 = 2
Num2 = 3
Num3 = 4
Num4 = 5
Num5 = A
Num6 = B
Num7 = C
Num8 = F
[NWPORTList1]
Num1 = 200
Num2 = 208
Num3 = 210
Num4 = 218
Num5 = 220
Num6 = 228
Num7 = 230
Num8 = 238
Num9 = 240
Num10 = 248
Num11 = 250
Num12 = 258
Num13 = 260
Num14 = 268
Num15 = 270
Num16 = 278
Num17 = 280
Num18 = 288
Num19 = 290
Num20 = 298
Num21 = 2A0
Num22 = 2A8
Num23 = 2B0
Num24 = 2B8
Num25 = 2C0
Num26 = 2C8
Num27 = 2D0
Num28 = 2D8
Num29 = 2E0
Num30 = 2E8
Num31 = 2F0
Num32 = 2F8
Num33 = 300
Num34 = 308
Num35 = 310
Num36 = 318
Num37 = 320
Num38 = 328
Num39 = 330
Num40 = 338
Num41 = 340
Num42 = 348
Num43 = 350
Num44 = 358
Num45 = 360
Num46 = 368
Num47 = 370
Num48 = 378
Num49 = 380
Num50 = 388
Num51 = 390
Num52 = 398
Num53 = 3A0
Num54 = 3A8
Num55 = 3B0
Num56 = 3B8
Num57 = 3C0
Num58 = 3C8
Num59 = 3D0
Num60 = 3D8
Num61 = 3E0
Num62 = 3E8
Num63 = 3F0
Num64 = 3F8
[NWPORTList2]
Num1 = 200
Num2 = 220
Num3 = 240
Num4 = 260
Num5 = 280
Num6 = 300
Num7 = 320
Num8 = 340
Num9 = 360
Num10 = 380
[NWPORTList3]
Num1 = A20
Num2 = A24
[NWPORTList4]
Num1 = 100
Num2 = 120
Num3 = 140
Num4 = 160
Num5 = 180
Num6 = 1A0
Num7 = 1C0
Num8 = 1E0
Num9 = 200
Num10 = 220
Num11 = 240
Num12 = 260
Num13 = 280
Num14 = 2A0
Num15 = 2C0
Num16 = 2E0
Num17 = 300
Num18 = 320
Num19 = 340
Num20 = 360
Num21 = 380
Num22 = 3A0
Num23 = 3C0
Num24 = 3E0
[NWPORTList5]
Num1 = 1A20
Num2 = 2A20
Num3 = 3A20
Num4 = 3A40
Num5 = 3A60
Num6 = 3A80
Num7 = 3AA0
Num8 = 4AE0
[NWPORTList6]
Num1 = 0A20
Num2 = 1A20
Num3 = 2A20
Num4 = 3A20
Num5 = 3A60
Num6 = 1000
Num7 = 2000
Num8 = 3000
Num9 = 4000
Num10 = 5000
Num11 = 6000
Num12 = 7000
Num13 = 8000
[NWPORTList7]
;Num1 = 240
;Num2 = 280
;Num3 = 2C0
;Num4 = 300
;Num5 = 320
;Num6 = 340
;Num7 = 360
Num1 = 200
Num2 = 220
Num3 = 240
Num4 = 260
Num5 = 280
Num6 = 2A0
Num7 = 2C0
Num8 = 2E0
Num9 = 300
Num10 = 320
Num11 = 340
Num12 = 360
Num13 = 380
Num14 = 3A0
Num15 = 3C0
Num16 = 3E0
[NWMEMList1]
Num1 = C0000
Num2 = C4000
Num3 = C8000
Num4 = CC000
Num5 = D0000
Num6 = D4000
Num7 = D8000
Num8 = DC000
[NWDMAList1]
Num1 = 1
Num2 = 2
Num3 = 3
Num4 = 4
Num5 = 5
Num6 = 6
Num7 = 7
;
; See the documentation on "Building your own OEMSETUP.INF" for more information.
;
[Options]
ODI_EN166X
; ODI_NE1000
; ODI_NE1500T
; ODI_M1500
; ODI_NE2100
; ODI_M2100
; ODI_NTR2000
; ODI_IBMTOK1
[ODI_EN166X]
Title = "Accton EN166X PnP ISA CARD"
DriverName = 1, ACC6X.LAN
MediaType = "ETHERNET"
Custom = {}
List1 = "Int", NWIRQList6, "5", ALL
List2 = "Port", NWPORTList7, "300", ALL
[ODI_NE1000]
Title = "Novell NE1000"
DriverName = 1, NE1000.LAN
MediaType = "ETHERNET"
Custom = {}
List1 = "Int", NWIRQList1, "3", 1, 4
List2 = "Port", NWPORTList2, "300", 6, 9
[ODI_NE1500T]
Title = "Novell NE1500T"
DriverName = 1, CNE1500T.LAN
MediaType = "ETHERNET"
Custom = {}
List1 = "Int", NWIRQList2, "3", ALL
List2 = "Port", NWPORTList2, "300", 6, 9
List3 = "Dma", "DMA Channel", "5", {3,5,6,7}
[ODI_M1500]
Title = "Ansel M1500 All-In-One-Networking"
DriverName = 1, CNE1500T.LAN
MediaType = "ETHERNET"
Custom = {}
List1 = "Int", NWIRQList2, "3", ALL
List2 = "Port", NWPORTList2, "300", 6, 9
List3 = "Dma", "DMA Channel", "5", {3,5,6,7}
[ODI_NE2100]
Title = "Novell NE2100"
DriverName = 1, CNE2100.LAN
MediaType = "ETHERNET"
Custom = {}
List1 = "Int", NWIRQList2, "3", ALL
List2 = "Port", NWPORTList2, "300", 6, 9
List3 = "Dma", "DMA Channel", "5", {3,5,6,7}
[ODI_M2100]
Title = "Ansel M2100 All-In-One-Networking"
DriverName = 1, CNE2100.LAN
MediaType = "ETHERNET"
Custom = {}
List1 = "Int", NWIRQList2, "3", ALL
List2 = "Port", NWPORTList2, "300", 6, 9
List3 = "Dma", "DMA Channel", "5", {3,5,6,7}
[ODI_NTR2000]
Title = "Novell Token-Ring"
DriverName = 1, CNTR2000.LAN
MediaType = "TOKEN-RING"
Custom = {}
List1 = "Port", NWPORTList3, "A20", ALL
[ODI_IBMTOK1]
Title = "IBM Token-Ring"
DriverName = 1, CNTR2000.LAN
MediaType = "TOKEN-RING"
Custom = {}
List1 = "Port", NWPORTList3, "A20", ALL
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.