1. en1660sj.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (en1660sj.zip)

                ISA NE2000 Compatible Ethernet Driver Support
                Netware Client32 Driver Installation Overview
                =============================================



Contents:
        A.) File Description
        B.) Driver Installation for DOS32
        C.) Driver Installation for Microsoft Windows 3.x
        D.) Driver Installation for Microsoft Windows 95


A.) File Description
--------------------

-------------------------------------------------------------------------------
Filename        Description
-------------------------------------------------------------------------------
README.TXT      This file. Presents a summary of the contents for
                Netware Client32 driver installation.

NW41.LAN        Client32 ODI driver for ISA NE2000 Compatible.
                This driver complies with Netware ODI Server driver SPEC 3.3.

NW41.LDI        The driver (NW41.LAN) installation information file for
                Netware Server 4.12, DOS32, Microsoft Windows 3.x.

NW41.INF        The driver (NW41.LAN) installation information file for
                Microsoft Windows 95.

-------------------------------------------------------------------------------

B.) Driver Installation for DOS32

    1.> If you have completed installed the Netware Client 32 for DOS,
        all you have to do is to modify STARTNET.BAT.  Please see the
        sample STARTNET.BAT below.
        if not, Please follow the next step 2 - step 7.

    Sample STARTNET.BAT is as follow:

        ISA NE2000 Compatible setted in PnP mode :
        The slot parameter is needed for installing PnP mode.
        Do NOT select port number when install in PnP
        mode. The following startnet.bat support multi-adapter. The second
        adapter slot=<number> is added by user for supportting multi-adapter.

SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=ETHERNET_802.2 PnP_Mode=1 SLOT=10001
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_802.3 PnP_Mode=1 SLOT=10001
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_II PnP_Mode=1 SLOT=10001
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_SNAP PnP_Mode=1 SLOT=10001

LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=ETHERNET_802.2 PnP_Mode=1 SLOT=10002
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_802.3 PnP_Mode=1 SLOT=10002
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_II PnP_Mode=1 SLOT=10002
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_SNAP PnP_Mode=1 SLOT=10002
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
C:


        ISA NE2000 Compatible setted in jumpless(non-pnpmode) mode:
        The user need to add port= < number> when complete install in
        jumpless mode.The following
        STARTNET.BAT support multi-adapter.


SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=ETHERNET_802.2 port=300
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_802.3 port=300
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_II  port=300
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_SNAP port=300

LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=ETHERNET_802.2 port=2a0
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_802.3 port=2a0
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_II  port=2a0
LOAD C:\NOVELL\CLIENT32\NW41.LAN FRAME=Ethernet_SNAP port=2a0
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
C:



    2.> Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware
        4.11 CD). When the product manual appears,  mark the
        "Netware Client 32 for DOS" item, then press <Enter>.

    3.> Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
        then press <Enter>.

    4.> Insert ISA-Bus Ethernet PnP Adapter Driver Diskette into your floppy
        diskette drive,then specify the driver path like A: or B:.

    5.> Select "ISA-Bus Ethernet PnP Adapter driver", then
        press <Enter>.

    6.> Following instructions to complete the Client32 for DOS software
        installation.

    7.> Reboot your machine.


C.) Driver Installation for Microsoft Windows 3.x

    Please refer to Content B.), in step 2, mark "Netware Client 32 for DOS"
    and "Client 32 for Windows"; in step 4, specify the driver path like
    A:\LANDRV32\NW41.LAN or B:\LANDRV32\NW41.LAN. then following step 3..7
    to complete the installation.


D.) Driver Installation for Microsoft Windows 95

    If you have installed the Microsoft Client in your Windows 95 system,
    you should remove the adapter object and NDIS 2/3 driver of the
    adapter from the Windows 95 system.  If you have installed previously
    ISA-Bus Ethernet PnP Adapter NDIS 2/3 driver,  you should do the following steps
    before installing the ISA-Bus Ethernet PnP Adapter Client32 driver.

    D.1) Remove the previously installed adapter object & driver of
         ISA-Bus Ethernet PnP Adapter, if any.
     ==============================================================
     1.> Click the "My Computer" icon in the Main Program Group.
     2.> Click the "Control Panel" icon from My Computer window.
     3.> Click the "System" icon from the Control Panel window.
     4.> Click the "Network adapter" icon from System window.
     5.> Click the "ISA-Bus Ethernet PnP Adapter" icon from
         System window.
     6.> Click <Remove> button, then click <OK> button.
     7.> Close the opened windows.


     Note:  If you NEVER pluged ISA NE2000 Compatible
            into your PC,  Procedure D.1) is not necessary.  And you
            just start from Procedure D.2).


    D.2) Client 32 Driver Installation on Windows 95
     ===============================================

     8.> Plug ISA NE2000 Compatible adapter onto one of the ISA or EISA
         slots of your PC machine.
     9.> Turn the power on to bootup the Windows 95.
    10.> Windows 95 will then prompt the "ISA-Bus Ethernet PnP
         Adapter" in New Hardware Found dialog box.
    11.> Following instructions to complete the installation.

         Note: Windows 95 will ask you to key in the proper path of the
               following diskette:

            a.> Netware Client 32 for Windows 95 Disk,
            b.> ISA-Bus Ethernet PnP Adapter Driver Diskette
                --> Insert Driver Diskette,
                then, assign the path to A:\LANDRV32 or B:\LANDRV32
            c.> Windows 95 CD-ROM

-- End of File --