Accton EN1688 ISA Ethernet Adapter
NDIS DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION
============================================++++========
Copyright (c) 1997 Accton Technology Corporation.
All rights reserved.
NDIS DRIVER FOR WINDOWS FOR WORKGROUPS 3.11 INSTALLATION
========================================================
Content:
--------
A) Install NDIS 2.0/ NDIS 3.0 driver to the WFW 3.11
B) Install ODI/ NDIS 3.0 driver to the WFW 3.11
A) Install NDIS 2.0/ NDIS 3.0 driver to the WFW 3.11
1. Run Windows by typing "WIN" from the DOS prompt.
2. Click the "Network" icon in the Main Program
Group.
3. Click the "Network Setup" icon from the Network window.
4. Check drivers button, if it is hidden and can't be selected then
goto next step. If it is visible and can be selected, goto step 8.
5. Click Networks button
6. Select "Install microsoft Windows Network" with no additional network.
7. Click "OK" button
8. Select "Drivers" item from the Network Setup dialog box.
9. Select "Add Adapters" item in the Option dialog box.
10. If you install this Adapter first time, Select "Unlisted or
Updated Network Adapter", then goto next step.
System will automatically search OEMSETUP.INF file which supported
by adapter maker.
If you have installed this adapter before, just select the
"Accton EN1688 ISA Ethernet driver" at drivers list table and goto
step 13.
11. Insert the driver diskette at floppy drive A or B then type
destination drive and path name in your PC.
Make sure the full path of the directory (i.e. A:\)
is given. Then you will see the "Accton EN1688 ISA Ethernet driver"
dialog box appear.
13. Using setup button to change IO BASE, IRQ and driver type.
Accton EN1688 ISA Ethernet adapter using 300, 3 as default IO BASE
and IRQ setting.
There are 4 drivers type:
. Real mode and Enhanced mode NDIS
. Enhanced mode NDIS
. Real mode NDIS
. ODI driver
You can select one of these 4 drivers type depend on your
application. For workgroups environment only, you can select
1'st driver type which combine real mode and enhanced mode NDIS.
14. Follow screen instructions to complete the process.
15. Restart your computer.
Following is some sample Configuration Files
--------------------------------------------
1. CONFIG.SYS File
FILES=30
BUFFERS=30
LASTDRIVE=Z
DEVICE=C:\WFW311\HIMEM.SYS
DEVICE=C:\WFW311\IFSHLP.SYS
STACKS=9,256
2. AUTOEXEC.BAT File
C:\WFW311\SMARTDRV.EXE
C:\WFW311\net start
PATH C:\WFW311;
SET TEMP=C:\WFW311\TEMP
3. PROTOCOL.INI File on Windows for Workgroups 3.11
[network.setup]
version=0x3110
netcard=ms$ndis2,1,MS$ndis2,2
transport=ms$netbeui,NETBEUI
lana0=ms$ndis2,1,ms$netbeui
[MS$ndis2]
DriverName=MS2000$
INTERRUPT=3
IOBASE=0x300
[ndis2]
adapters=MS$ndis2
[NETBEUI]
BINDINGS=MS$ndis2
LANABASE=0
SESSIONS=10
NCBS=12
4. SYSTEM.INI
[386Enh]
netcard=acc311.386
C) Install ODI/ NDIS 3.0 driver to the WFW 3.11
1. Run Windows by typing "WIN" from the DOS prompt.
2. Click the "Network" icon in the Main Program
Group.
3. Click the "Network Setup" icon from the Network window.
4. Check drivers button, if it is hidden and can't be selected then
goto next step. If it is visible and can be selected, goto step 8.
5. Click Networks button
6. Select "Install microsoft Windows Network" with no additional network.
7. Click "OK" button
8. Select "Drivers" item from the Network Setup dialog box.
9. Select "Add Adapters" item in the Option dialog box.
10. If you install the Adapter first time, Select "Unlisted or
Updated Network Adapter", then goto next step.
System will automatically search OEMSETUP.INF file which supported
by adapter maker.
If you have installed this adapter before, just select the
"Accton EN1688 ISA Ethernet driver" at drivers list table and goto
step 13.
11. Insert the driver diskette at floppy drive A or B then type
destination drive and path name in your PC.
Make sure the full path of the directory (i.e. A:\)
is given. Then you will see the "Accton EN1688 ISA Ethernet driver"
dialog box appear.
13. Using setup button to change IO BASE, IRQ and driver type.
Accton EN1688 ISA Ethernet adapter using 300, 3 as default IO BASE
and IRQ setting.
There are 4 drivers type:
. Real mode and Enhanced mode NDIS
. Enhanced mode NDIS
. Real mode NDIS
. ODI driver
You must select ODI driver to let NetWare ODI driver work at
WFW 3.11.
14. Follow screen instructions to complete the process.
15. Restart your computer.
Note: To connect to a Novell server from within Windows for Workgroups
make sure you are logged on to a NetWare server before starting
Windows. Also make sure that you have setup Windows for Workgroups
to use Novell NetWare.
Following is some sample Configuration Files
--------------------------------------------
1. CONFIG.SYS File
FILES=30
BUFFERS=30
LASTDRIVE=Z
DEVICE=C:\WFW311\HIMEM.SYS
DEVICE=C:\WFW311\IFSHLP.SYS
STACKS=9,256
2. AUTOEXEC.BAT File
SET TEMP=c:\windows\temp
PATH c:\windows;%PATH%
c:\windows\net start
lsl
nwmlid
c:\windows\odihlp.exe
ipxodi
netx
3. PROTOCOL.INI File on Windows for Workgroups 3.11
[network.setup]
version=0x3110
netcard=ndis2,1,ndis2,4
transport=ms$netbeui,NETBEUI
lana0=ndis2,1,ms$netbeui
[net.cfg]
PATH=C:\WINDOWS\net.cfg
[ndis2]
[Link Driver nwmlid]
[NETBEUI]
BINDINGS=nwmlid
LANABASE=0
SESSIONS=10
NCBS=12
4. SYSTEM.INI
[boot]
shell=progman.exe
network.drv=wfwnet.drv
.
.
[386Enh]
network=*vnetbios,*vwc,vnetsup.386,vredir.386,vserver.386
netheapsize=20
netmisc=ndis.386,msodisup.386
transport=netbeui.386
InDOSPolling=FALSE
.
.
[Network]
winnet=wfwnet/00025100
multinet=nonet
FileSharing=No
PrintSharing=No
LogonDisconnected=yes
EnableSharing=no
UserName=Thomas
Workgroup=WORKGROUP
ComputerName=IBMPC
Comment=IBMPC
logonvalidated=no
[network drivers]
devdir=C:\WINDOWS
LoadRMDrivers=No
===End===
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.