Accton EN1688 ISA Ethernet Adapter NDIS Driver for DEC PATHWORK Installation ========================================= Copyright (c) 1997 Accton Technology Corporation. All Rights Reserved. The drivers named ETHNE contained in the \NDIS\DOS subdirectory of your Driver Diskette conform to the Network Driver Interface Specification (NDIS) defined by Microsoft/3Com. Installation Procedure ---------------------- 1. Insert the DEC PATHWORKS Client Setup diskette #1 into your floppy drive (either A: or B:). 2. Type the prompt, type the following and press <Enter> to bring up the startup menu: A:>NETSETUP <Enter> 3. You'll be asked if your keyboard type is LK250. Select "NO." If you are using an LK250 keyboard choose "YES." 4. Next, you'll be prompted to choose a transport option. Select the "DECNET transport option" and press <Enter> to proceed. 5. Your system will prompt you to insert the DNET TRNSPRT diskette#1 into your floppy drive. Follow screen instructions. 6. Then you'll be prompted to specify a destination drive. Type C: or D: 7. When asked if you are creating an initial workstation diskette, select "NO." 8. Type in the node name and address (i.e., node number) in the corresponding field. Then press <Enter>. 9. Type in the server node name and address (i.e., node number) in the corresponding field. Then press <Enter>. 10. When asked to "Select the network adapter type:" choose Ethernet. 11. When prompted to "Select the network adapter:" choose "Other NDIS." 12. Indicate the subdirectory location of your NDIS driver in the Driver Diskette. For example, type the following: A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ACCTON\ETHNE.DOS 13. When prompted, indicate the subdirectory location of the PROTOCOL.INI file in the Driver Diskette. For example, type the following: A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ACCTON\ 14. Select "WRITE KEY DISK" to save the settings that you have chosen. When prompted to copy the ETHNE.DOS and PROTOCOL.INI files, insert the driver diskette into your floppy drive. 15. Follow screen instructions to complete the installation. 16. From the Configuration screen, press F10 to exit to C:\. 17. Edit the PROTOCOL.INI file from the DECNET subdirectory. Remove the semicolon (;) from the statement "NI_IRQ = 5" under the [DATALINK] section. 18. Make sure that the IRQ value in the new [ETHNE.DOS] section, matches the NI_IRQ value in the [DATALINK] statement. Sample Configuration Files -------------------------- 1. CONFIG.SYS File shell=c:\command.com /P /E:526 device=c:\decnet\hiMEM.sys device=C:\dos\EMM386.EXE ram 1024 dos=high, UMB devicehigh=c:\decnet\protman.sys /I:D:\DECNET devicehigh=c:\decnet\ethne.dos rem device=c:\decnet\nddrv.sys rem device=c:\decnet\npdrv.sys FILES=50 BUFFERS=50 LASTDRIVE=v STACKS=9,256 2. PROTOCOL.INI file for PATHWORKS v4.1 ; PROTOCOL.INI file create by DNETOMO.V41 V4.1.060 ; via DNETWIK.V41 V4.1.047 [protocol manager] DRIVERNAME = PROTMAN$ [IPX4MAC] DRIVER = IPX$MAC BINDINGS = ETHNE.DOS [DATALINK] DRIVERNAME = DLL$MAC LG_BUFFERS = 16 SM_BUFFERS = 6 OUTSTANDING = 32 HEURISTICS = 0 BINDINGS = ETHNE.DOS ;Specify IRQ level used by workstations network adapter NI_IRQ = 3 [ETHNE.DOS] ; PROTOCOL.INI drivername = ETHNE$ ; irq = NI_IRQ = Adapter IRQ Setting irq = 3 iobase = 0x300 ; End of this sample file 3. AUTOEXEC.BAT echo off break on cls prompt $p$g REM Insert any keyboard internationalization and character set information here. if not exist \decnet\STARTNET.BAT goto nostartup call \decnet\STARTNET goto end :nostartup echo ** WARNING ** STARTNET.BAT file not found. Network functions not performed --- All trademarks or brand names mentioned are properties of their respective companies. -- THE END --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.