Flash Com Version 1.0
------------------------------------------------------------------
The following instructions will guide you in installing your modem
into a valid COMPORT if your operating system fails to install your
modem correctly:
1. Click on START
2. Go to SETTINGS
3. Go to CONTROL PANEL
4. Double click on SYSTEM
5. Click on the Device Manager
6. Double click MODEMS Tab
7. Highlight the "Creative Modem Blaster Modem" and double click
8. Click on the RESOURCES Tab
9. UNCHECK the "Use automatic settings"
10. HIGHLIGHT the "Input/ Output Range" area
11. Locate the "Settings Based on" section and choose the BASIC CONFIGURATION
setting that sets the "INPUT/OUTPUT RANGE" to = 02E8-02Ef (usually
0008 to 000A settings). This will set the modem to COM 4 and IRQ
(what ever is available)
12. HIGHLIGHT "Interrupt Request"
13. CLICK on the "Change Settings" Tab and locate the next available
IRQ (make sure the field at the bottom responds with "No devices
are conflicting")
14. Close ALL open fields until you are back to the CONTROL PANEL field
15. To check to see if system is able to see if the modem has been
installed, Double click on the MODEMS ICON, and CLICK on the Diagnostics
Tab. You should see that your modem is now on COM4. Highlight
COM4 and click on the "More Info" tab to allow your system to
communicate with the modem. If you see ATI responses then you have
successfully installed your modem.
16. If you are still encountering problems upon following the above
instructions, please contact our Technical Support Group.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.