MDP7800-U / MDP7800V-U / MDP7800SP-U PCI Modem
==============================================
Section A: Important notice
Section B: Installation of PCI modem drivers on Windows 95
OSR1 platform
Section C: Installation of PCI modem drivers on Windows 95
OSR2 platform
Section D: Installation of PCI modem drivers on Windows 98
platform
Section E: Installation of PCI modem drivers on Windows NT
platform
Section F: Installation of Trio DataFax Voice and other
applications
Section G: How to install Microsoft Fax in Windows 98
Section H: Technical Support
-------------------------------------------------------------------------------------------------
Section A:
Important notice
================
1. The PCI modem can be set up on Windows 95 OSR1, Windows 95 OSR2,
Windows 98 or Windows NT but no support on WIN3.x platform.
2. For MDP7800-U, speaker phone is not supported but it can be used
as answering machine.
3. For MDP7800-U modem, though the 'Dialer...' button for speakerphone
function in Trio DataFax Voice is enabled. However, it is not
supported by this modem.
4. For information how to use the AT command set, please refer to file
Atcomset.doc in the root directory of the installation CD.
-------------------------------------------------------------------------------------------------
Section B:
Installation of PCI modem drivers on Windows 95 OSR1 platform
==============================================================
1. Win95 will automatically detect the PCI PnP Modem
and displays the "New Hardware Found" dialog box.
2. Insert the installation CD provided into the CD-ROM drive.
3. Select the "Driver from disk provided by Hardware manufacturer
option and click OK.
4. Type D:\Win95\ in the combo box and click OK.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings to resolve the
device conflict.
For further details, please refer to Trouble-shooting section in
Windows 95.
-------------------------------------------------------------------------------------------------
Section C:
Installation of PCI modem drivers on Windows 95 OSR2 platform
==============================================================
1. Win95 will automatically detect the PCI PnP Modem after
which the system will prompt the "Update Device Driver Wizard"
dialog box.
2. Insert the installation CD provided into the CD-ROM drive.
3. Click "Next" to let system search for an updated driver.
4. Click "Finish" to use the found driver.
5. Click "Ok" when prompted to insert the installation disk.
6. Change path to D:\ and click OK.
7. System will then automatically load all the necessary drivers and
files needed.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings to resolve the
device conflict.
For further details, please refer to Trouble-shooting section in
Windows 95.
Uninstalation
=============
Run deinstal.exe to uninstall PCI modem drivers.
-------------------------------------------------------------------------------------------------
Section D:
Installation of PCI modem drivers on Windows 98 platform
=========================================================
Installation of modem drivers in Win98 is similar to Win95.
1. Windows 98 will automatically detect the PCI modem.
Click "Next" to continue.
2. Insert the installation CD provided into the CD-ROM Drive.
3. Select "Search for the best drivers for your device. (Recommended)"
and click "Next" to continue.
4. Enable "CD-Rom drive" selection and click "Next" to continue.
5. Modem Driver will be found on the installation CD. Click "Next"
to continue.
6. Click "Finish" to complete modem installation.
7. System will then automatically load all the necessary drivers and
files needed.
You might encounter some resource conflicts after loading the PnP modem
device (especially when there are non-Plug & Play adaptors installed in
your system). To alter the resource configurations, go to Control Panel
- System - Device Manager and click on "Modem". Choose the modem device
and click on "Properties". You can change the settings to resolve the
device conflict.
For further details, please refer to Trouble-shooting section in
Windows 98.
Uninstalation
=============
Run deinstal.exe to uninstall PCI modem drivers.
-------------------------------------------------------------------------------------------------
Section E:
Installation of PCI modem drivers on Windows NT platform
=========================================================
1. Run the setup.exe located at
D:\Winnt\7800-u for MDP7800-U PCI Modem
D:\Winnt\7800v-u for MDP7800V-U PCI Modem
D:\Winnt\7800sp-u for MDP7800SP-U PCI Modem
2. Follow on screen instructions to finish the installation.
Uninstallation
==============
To uninstall PCI modem drivers, run setup.exe located at
D:\Winnt\7800-u for MDP7800-U PCI Modem
D:\Winnt\7800v-u for MDP7800V-U PCI Modem
D:\Winnt\7800sp-u for MDP7800SP-U PCI Modem
Follow the online instructions to finish the uninstallation.
-------------------------------------------------------------------------------------------------
Section F:
Installation of Trio DataFax Voice and other applications
=========================================================
To install Trio DataFax Voice and other bundled applications
, run Inst32.exe. Follow the online screen to proceed with
installation.
For further information of Trio DataFax Voice, please refer
to Relnotes.txt under D:\Trio\TDFV53\ in the installation CD.
-------------------------------------------------------------------------------------------------
Section G:
How to install Microsoft Fax in Windows 98
==========================================
If you are staying in US, go to directory
D:\Tools\oldwin95\message\us in Windows 98 installation CD.
For other countries go to D:\Tools\oldwin95\message\intl
1. First run wms.exe under the directory to install Microsoft
Messaging.
2. Next run awfax.exe under the same directory to install
Microsoft Fax.
For further information on Microsoft Messaging and Microsoft
Fax, read wms-fax.txt under the same directory.
-------------------------------------------------------------------------------------------------
Section H:
Technical Support
=================
***********************************************************
* In case you encounter any problem with our products, *
* please quote the following model(s) when calling our *
* Technical Support : *
* MDP7800 PCI Modem *
***********************************************************
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.