940-OD.SYS Ver 2.10 Winbond Electronics Corporation 2/26/96 Description: 1. 940-OD.COM is a new ODI workstation driver. It is for the OS/2 environment only and therefore defaults to the 802.2 frame type. 2. If there is only one 940 card, the driver will automatically get IOBASE and IRQ from PCI Configuration Space. 3. If there is more than 940 card, user must indicate a specified IOBASE in NET.CFG file. Installation: 1. Load 940-OD.SYS into a floppy disk. 2. Double-click the 'Novell' icon on the OS/2 desktop. If you cannot find the 'Novell' icon on the OS/2 desktop, you must install it first from the CD-ROM of the Netware 4.x Operation System. 3. Double-click the 'Install' icon in the 'Novell' window. 4. Choose 'Requester on Workstation' from the 'Installation' menu. 5. Type the target directory and source drive in the 'Set Target Directory' window, and press the <OK> button when you finish. 6. Select 'Edit CONFIG.SYS and Copy All Files' in the 'Requester Installation' window, and then press the <OK> button. 7. Type the driver name 940-OD.SYS in the 'Step1:Choose the ODI LAN Driver' window, and then press the <Continue> button. 8. Follow the instructions and finish the installation. 9. If there is more than one 940 card in your system, you must add the following statements to the NET.CFG file: Link Driver 940-OD port d000 -> selected W89C940 card 10.I you want to create or modify the NET.CFG file, you can choose 'This Workstation' from the 'Configuration' menu. 11. Reboot your system. Use: 1. boot your computer, 2. if you want to select another 940 card or set the Ethernet Frame Type, step1: double-click the *Novell* icon on the OS/2 desktop, step2: double-click the *Install* icon in the *Novell* window, step3: choose *This Workstation* from the *Configuration* menu, step4: modify the NET.CFG file, step5: reboot your system. 1. Boot your computer. 2. If you want to select another 940 card or set the Ethernet Frame Type, follow these steps. Step1: Double-click the 'Novell' icon on the OS/2 desktop, Step2: Double-click the 'Install' icon in the 'Novell' window, Step3: Choose 'This Workstation' from the 'Configuration' menu, Step4: Modify the NET.CFG file, Step5: Reboot your system. Trouble Shooting: 1. Message: 'No Winbond 940 IO card existed.' Solution: Make sure that your W89C940 PCI card is plugged into the system. 2. Message: 'There are multiple Winbond 940 cards. Use NET.CFG to specify I/O port.' Solution: Because there is more than one 940 card in your system, you must use the I/O port to select a W89C940 card. This is done by adding the following statements to the NET.CFG file: Link Driver 940-OD port d000 ---> selected W89C940 card Histories of Release: ***) 2.00, 01-11-1996 This is first revision of 940-OD.SYS Device Driver for OS/2. ***) 2.10, 02-26-1996Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.