1. NJUNIV2.EXE Driver
2. install.txt File Contents

install.txt Driver File Contents (NJUNIV2.EXE)

This disk contains ENCAD Windows drivers for the Windows
3.x (3.1/3.11), Windows 95 and Windows NT 4.0 operating 
systems.  Each driver is located in the appropriate
directory on the disk.  To install the correct driver
for your particular operating system follow the directions
listed below.

For Windows 3.x (3.1 / 3.11)
Insert the diskette into your floppy drive port.
From the 'Main' group select 'Control Panel' then
'Printers' then 'Add'.  Select 'Have Disk' then
type in a:\3x then select 'Install' OR select 
'Browse' then select the '3x' directory of a:\
and select 'OK.

For Windows 95
Insert the diskette into your floppy drive port.
Select 'Start' then 'Settings' then 'Printers' then 
double-click on the 'Add Printer' icon. 
When prompted select 'Have Disk' then type
in A:\95 and select 'OK' OR select 'Browse'
then select the '95' directory of a:\ and
select 'OK'.

For Windows NT 4.0
Insert the diskette into your floppy drive port.
Select 'Start' then 'Settings' then 'Printers' then 
double-click on the 'Add Printer' icon. 
When prompted select 'Have Disk' then type
in A:\NT40 and select 'OK' OR select 'Browse'
then select the 'NT40' directory of a:\ and
select 'OK'.

ENCAD Windows drivers use color management profiles to
provide the best possible color match between your
original source file and your final printed output.
These files, while not required, are essential to
providing the maximum efficiency and quality from
your ENCAD Windows drivers.  These color profiles
are located on the 4 disk set labeled 'NOVAJET 
Series RGB Color Profiles' which shipped with your
printer.  It is highly recommended that you install
these files prior to printing with your new NOVAJET. 

Version Information:

3x Directory = ENCAD Windows 3.x NOVAJET Series System Driver v3.32

95 Directory = ENCAD Windows 95 NOVAJET Series System Driver v1.31

Nt40 Directory = ENCAD Windows NT 4.0 NOVAJET Series System Driver v1.02