README.TXT Driver File Contents (drv84011.exe)

        ===============================================================
         How to install LAN Manager MS-DOS workstation with W840ND.DOS
        ===============================================================

* Please follow the procedure below to setup LAN Manager MS-DOS
  workstation:

   1. When installation program asks for a network drivers,
      select "Other Driver".
   2. Insert Winbond Drivers diskette into drive A:
   3. Type "A:\MSLANMAN.DOS" and press <Enter>
   4. Follow the direction to finish the setup procedure.

* Trouble Shooting

   1. Message: "!! No W89C840 card detected"
        Solution: Make sure that your W89C840 card is plugged steadily.

   2. Message: "!! No free W89C840 card"
        Solution: One driver for one card. Make sure that there is less
        drivers loaded than card plugged. If option keyword SelectedID is
        assigned, make sure that all node ID's assigned is correct or let
        drivers without SelectedID be loaded after those with SelectedID.

   3. Message: "!! Cannot open PROTMAN$"
        Solution: Make sure that PROTMAN.DOS is loaded before W840ND.DOS,
        and it is initialized successfully. If the syntax of PROTOCOL.INI
        is incorrect, PROTMAN$ cannot be loaded.

   4. Message: "!! Bad Parameter in PROTOCOL.INI"
        Solution: The parameter is invalid. For example, the correct
        SelectedID format need two single quotation signs ('). If you fail
        to do it, this message will be shown.

   5. Message: "!! Unknown Keyword in PROTOCOL.INI"
        Solution: W840ND only accepts two keywords: DRIVERNAME and SELECTED.
        Other keywords are unknown. Notice that, PCI bus need not assign
        IOBASE and INTERRUPT.

   6. Message: "!! Specified SELECTEDID is absent or bound"
        Solution: You specified a node ID at keyword SelectedID, and this ID
        is bound by another drivers or can not be found. Make sure that the
        ID is correct.

   7. Condition: when running with the older version of EMM386.EXE which is
      under \lanman.dos\drivers\dosutils directory, PC will hang on loading
      TCP/IP.
        Solution: The older version of EMM386.EXE can cause some PCI computer
        to hang. Please update EMM386.EXE by version 4.49 or later. Version
        4.49 ships with DOS version 6.22.

* Version Release

   1.00 08-26-1997
        This is the first revision of W840ND.DOS 1.0.0 MAC Driver.

   1.10 01-12-1998
        Fix the bug that the system will generate syntax error when the user
        sets the parameter FULLDUPLEX.

   1.20 06-02-1998
        1. Add one parameter 'Nway',
        2. Fix the bug issued by DavidCom's PHY.

   1.60 08-26-1998
        1. Modify the method to handle 'rx buffer unavailable' case,
        2. Fix the bug issued by EMM386.EXE,
        3. Modify the interrupt sharing from 'No Shared' to 'Shared'.

   1.70 09-11-1998
        1. Fix the bug issued by BOOTROM.

   1.80 12-30-1998
        1. Fix the buffer error bug issued by heavy traffic.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.77