1. cc2336i.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (cc2336i.exe)

Congratulations on purchasing a 3Com Megahertz International
modem for Windows 95!

This README.TXT file contains information to help you set up
your CC2336i modem and avoid common problem areas when using
your PC Card.
--------------------------------------------------------------- 
TABLE OF CONTENTS

1.  Installing Your Modem
2.  Installing Your Modem on an HP Omnibook 800CS, an NEC 6030,
    or an IBM 760 XL Computer
3.  If You are Having Trouble Connecting
4.  Setting the Number of Rings Before Answering
5.  Using the Diagnostic Software
6.  If You are Using a Texas Instruments Notebook with a 
    Phoenix Card Manager
7.  If the Modem is Detected as a Voice Modem 
8.  If You are Using an IBM 760C or an IBM365XD Computer
9.  If You are Using an IBM 755CD or CSE
10.  Uninstalling the Modem
 
---------------------------------------------------------------
1.  Installing Your Modem

When installing your modem, insert the Modem Installation
Diskette and click Start > Run > a:\setup.  Insert the 
modem when prompted.

----------------------------------------------------------------
2.  Installing Your Modem on an HP Omnibook 800CS, an NEC 6030,
    or an IBM 760 XL Computer

If you are using an HP Omnibook 800CS, an NEC 6030, or an
IBM 760 XL computer, do not run Setup.  Simply insert the
modem into the PC Card slot and allow Windows to autodetect
it.  When you are prompted, select "Disk Provided by 
Manufacturer" and insert the Modem Installation Diskette.
After the computer has rebooted and you hear the tones
indicating the modem is inserted, run a:\setup from the
Modem Installation to copy necessary files to your computer.

----------------------------------------------------------------
3.  If You are Having Trouble Connecting

If you're having problems connecting with your modem, verify
that the modem initialization string in your communications 
software contains AT&F1 (hardware flow control). If you are
having problems connecting internationally, see file 
c:\mhz\country.txt or a:\country.txt for helpful information.

---------------------------------------------------------------
4.  Setting the Number of Rings Before Answering

On incoming calls, the modem uses the first ring to come out 
of low power mode.  For this reason, set ATS0=1 to answer on
the second ring.

---------------------------------------------------------------
5.  Using the Diagnostic Software

DIAGNOSE.EXE allows you to easily collect information about 
your computer and any inserted PC Cards.  The information is 
then used to verify that your system is running correctly, or 
to fix any problems.  

To use DIAGNOSE, follow these steps:
1.  With Windows running, click "Start"
3.  Click "Run"
4.  Type c:\mhz\diagnose and click OK

Select the tests you want to perform from the menus at the top
of the screen.

---------------------------------------------------------------  
6.  If You are Using a Texas Instruments Notebook with a 
    Phoenix Card Manager

At ship time, there were known issues with functionality in a
Texas Instruments notebook using a Phoenix card manager, such
as TI Extensa and TI TravelMate.  Call the support phone number
for your notebook, or access www.acer.com.

---------------------------------------------------------------
7.  If the Modem is Detected as a Voice Modem

The voice feature is not supported on this modem.

---------------------------------------------------------------
8.  If You are Using an IBM 760C or an IBM 365XD Computer

If you have a problem with modem operating after the computer
has reactivated after going into sleep or suspend modes, leave
the computer running and remove and reinsert the modem. 

---------------------------------------------------------------
9.  If You Don't Hear Sounds During Faxing

When faxing with RapidComm software, you may not hear any
sounds during the faxing process.  If this happens, go into
RapidComm modem setup and set the volume to medium (refer to
the RapidComm User's Guide for more information).

---------------------------------------------------------------
10. Uninstalling the Modem

Your modem will not uninstall correctly if you use 
Control Panel>Modem>Remove.

Your modem will uninstall correctly using one of the following
methods: 

Start>Programs>Megahertz International Modem for Windows>
Uninstall

-- or --

c:\mhz\uninstal.exe

-- or --

From the Modem Installation Diskette, run a:\setup /u