Command Quick Reference 3CCM156 B
----------------------------------------------------------------------
&$ HELP, Ampersand Commands Mn n=0 Speaker OFF
A/ Repeat Last Command n=1 Speaker ON Until CD
A> Continuously Repeat Command n=2 Speaker Always ON
AT Command Mode Prefix n=3 Speaker OFF During Dial
A Answer Call On n=0 Return Online
Bn n=0 V32 Mode/CCITT Answer Seq n=1 Return Online & Retrain
n=1 Bell Answer Seq P Pulse Dial
Dn Dial a Telephone Number Qn n=0 Result Codes Sent
n=0..9#*TPR,;W@!()- n=1 Quiet (No Result Codes)
DL Dial Last Phone Number n=2 Verbose/Quiet ON Answer
DSn Dial Stored Phone Number Sr=n Sets Register "r" to "n"
D$ HELP, Dial Commands Sr? Query Register "r"
En n=0 No Command Echo S$ HELP, S Registers
n=1 Echo Command Chars T Tone Dial
Fn n=0 Online Echo Vn n=0 Numeric Responses
n=1 No Online Echo n=1 Verbal Responses
Hn n=0 ON Hook (Hang Up) Xn n=0 Basic Result Codes
n=1 OFF Hook n=1 Extended Result Codes
In n=0 Product Code n=2-4 Advanced Result Codes
n=1 Checksum Yn n=0 Next Reset to &W0 settings
n=2 RAM Test n=1 Next Reset to &W1 settings
n=3 Product ID string n=2 Next Reset to &F0 settings
n=4 Current Settings n=3 Next Reset to &F1 settings
n=5 NVRAM Settings n=4 Next Reset to &F2 settings
n=7 Product Configuration Zn n=0 Y setting determines reset
n=8 Blacklisting Display n=1 Reset to &W0 settings
n=2 Reset to &W1 settings
n=3 Reset to &F0 settings
Ln n=0 Low Speaker Volume n=4 Reset to &F1 settings
n=1 Low Speaker Volume n=5 Reset to &F2 settings
n=2 Med Speaker Volume +++ Escape Code
n=3 Hi Speaker Volume $ HELP, Command Summary
Country Commands
----------------
+GCI? Displays current country configuration
+GCI+? Displays all configurations
+GCI=nnn Selects coutry configuration
Dial Commands
-------------
0-9 Digits to Dial
* Auxiliary Tone Dial Digit
# Auxiliary Tone Dial Digit
T Tone Dialing
P Pulse Dialing
R Call an Originate Only Modem
, Pause (Wait for S8 Time)
/ Short Delay
; Remain in Command Mode After Dialing
W Wait for 2nd Dial Tone (X2,X4)
@ Wait for an Answer (X3,X4)
! Flash Switch Hook
& Wait for credit card
Ampersand Commands
------------------
&An n=0 Disable /ARQ Result Codes &Pn n=0 N.American Pulse Dial
n=1 Enable /ARQ Result Codes n=1 UK Pulse Dial
n=2 Enable /Modulation Codes &Rn n=1 Ignore RTS
n=3 Enable /Extra Result Codes n=2 RX to DTE/RTS high
&Bn n=0 Floating DTE Speed &Sn n=0 DSR Always ON
n=1 Fixed DTE Speed n=1 Modem Controls DSR
n=2 DTE Speed Fixed When ARQ &Tn n=0 End Test
&Cn n=0 CD Always ON n=1 Analog Loopback (ALB)
n=1 Modem Controls CD n=3 Digital Loopback (DLB)
&Dn n=0 Ignore DTR n=4 Grant Remote DLB
n=1 On-Line Command Mode n=5 Deny Remote DLB
n=2 DTE Controls DTR n=6 Remote Digital Loopback
n=3 Reset ON DTR Loss n=7 Remote DLB With Self Test
&Fn n=0 Load Factory 0, HW FC n=8 ALB With Self Test
n=1 Load Factory 1, HW FC &Un n=0 Variable link rate floor.
n=2 Load Factory 2, SW FC n=1 Minimum link rate 300 bps
&Gn n=0 No Guard Tone n=2 Minimum link rate 1200 bps
n=1 550 Hz Guard Tone n=3 Minimum link rate 2400 bps
n=2 1800 Hz Guard Tone n=4 Minimum link rate 4800 bps
&Hn n=0 Disable TX Flow Control n=5 Minimum link rate 7200 bps
n=1 CTS n=6 Minimum link rate 9600 bps
n=2 Xon/Xoff n=7 Minimum link rate 12000 bps
n=3 CTS and Xon/Xoff n=8 Minimum link rate 14400 bps
&In n=0 Disable RX Flow Control n=9 Minimum link rate 16800 bps
n=1 Xon/Xoff n=10 Minimum link rate 19200 bps
n=2 Xon/Xoff Chars Filtered n=11 Minimum link rate 21600 bps
n=3 HP Enq/Ack Host Mode n=12 Minimum link rate 24000 bps
n=4 HP Enq/Ack Terminal Mode n=13 Minimum link rate 26400 bps
n=5 Xon/Xoff for non-ARQ Mode n=14 Minimum link rate 28800 bps
&Kn n=0 Disable Data Compression n=15 Minimum link rate 31200 bps
n=1 Auto Data Compression n=16 Minimum link rate 33600 bps
n=2 Enable Data Compression n=17 Minimum link rate 28000 bps
n=3 Selective Data Compression n=18 Minimum link rate 29333 bps
&Mn n=0 Normal Mode n=19 Minimum link rate 30666 bps
n=4 ARQ/Normal Mode n=20 Minimum link rate 32000 bps
n=5 ARQ Mode n=21 Minimum link rate 33333 bps
&Nn n=0 Highest Link Speed n=22 Minimum link rate 34666 bps
n=1 300 bps n=23 Minimum link rate 36000 bps
n=2 1200 bps n=24 Minimum link rate 37333 bps
n=3 2400 bps n=25 Minimum link rate 38666 bps
n=4 4800 bps n=26 Minimum link rate 40000 bps
n=5 7200 bps n=27 Minimum link rate 41333 bps
n=6 9600 bps n=28 Minimum link rate 42666 bps
n=7 12000 bps n=29 Minimum link rate 44000 bps
n=8 14400 bps n=30 Minimum link rate 45333 bps
n=9 16800 bps n=31 Minimum link rate 46666 bps
n=10 19200 bps n=32 Minimum link rate 48000 bps
n=11 21600 bps n=33 Minimum link rate 49333 bps
n=12 24000 bps n=34 Minimum link rate 50666 bps
n=13 26400 bps n=35 Minimum link rate 52000 bps
n=14 28800 bps n=36 Minimum link rate 53333 bps
n=15 31200 bps n=37 Minimum link rate 54666 bps
n=16 33600 bps n=38 Minimum link rate 56000 bps
n=17 28000 bps n=39 Minimum link rate 57333 bps
n=18 29333 bps &Wn n=0 Store Configuration 0
n=19 30666 bps n=1 Store Configuration 1
n=20 32000 bps &Yn n=0 Destructive
n=21 33333 bps n=1 Destructive/Expedited
n=22 34666 bps n=2 Nondest./Expedited
n=23 36000 bps n=3 Nondest./Unexpedited
n=24 37333 bps &Zn=s Store Phone Number
n=25 38666 bps &Zn? Query Phone Number
n=26 40000 bps
n=27 41333 bps
n=28 42666 bps
n=29 44000 bps
n=30 45333 bps
n=31 46666 bps
n=32 48000 bps
n=33 49333 bps
n=34 50666 bps
n=35 52000 bps
n=36 53333 bps
n=37 54666 bps
n=38 56000 bps
n=39 57333 bps
S Register Functions
--------------------
S0 Ring to Answer ON S26 Reserved
S1 Counts # of Rings S27 Bit Mapped
S2 Escape Code Char 1 = V21 Mode
S3 Carriage Return Char 2 = Disable TCM
S4 Line Feed Char 4 = Disable V32
S5 Backspace Char 8 = Disable 2100hz
S6 Wait Time/Dial Tone (sec) 16 = Enable V23 Fallback
S7 Wait Time/Carrier (sec) 32 = Disable V32bis
S8 Comma Time (sec) 64 = Reserved
S9 Carrier Detect Time (1/10sec) 128 = Software Compatibility Mode
S10 Carrier Loss Time (1/10sec) S28 V32 Handshake Time (1/10sec)
S11 Dial Tone Spacing (msec) S29 V.21 answer mode fallback timer
S12 Escape Code Time (1/50sec) S30 Reserved
S13 Bit Mapped S31 Reserved
1 = Reset ON DTR Loss S32 Connection bit mapped operations.
2 = Reduced Non-ARQ TX Buffer 1 = V.8 Call Indicate enable
4 = Set DEL=Backspace 2 = Enable V.8 mode
8 = Do DS0 ON DTR 4 = Reserved
16 = Do DS0 ON Reset 8 = Disable V.34 modulation
32 = Reserved 16 = Disable V.34+ modulation
64 = Disable Quick Retrains 32 = Disable x2 modulation
128 = Escape Code Hang Up 64 = Disable V.90 modulation
S14 Reserved 128 = Reserved
S15 Bit Mapped S33 V.34 & V.34+ Connection setup
1 = MNP/V.42 Disabled in V.22 bit mapped control flags.
2 = MNP/V.42 Disabled in V.22bis 1 = Disable 2400 Symbol rate
4 = MNP/V.42 Disabled in V.32 2 = Disable 2743 Symbol rate
8 = Disable MNP Handshake 4 = Disable 2800 Symbol rate
16 = Disable MNP Level 4 8 = Disable 3000 Symbol rate
32 = Disable MNP Level 3 16 = Disable 3200 Symbol rate
64 = Unusual MNP-Incompatibility 32 = Disable 3429 Symbol rate
128 = Disable V.42 64 = Reserved
136 = Disable V.42 Detect Phase 128 = Disable Shaping
S16 Test Modes S34 V.34 & V.34+ Connection setup
1 = Reserved bit mapped control flags.
2 = Dial Test 1 = Disable 8S-2D trellis encoding
4 = Reserved 2 = Disable 16S-4D trellis encoding
8 = Reserved 4 = Disable 32S-2D trellis encoding
16 = Reserved 8 = Disable 64S-4D trellis encoding
32 = Reserved 16 = Disable Non linear coding
64 = Reserved 32 = Disable TX level deviation
128 = Reserved 64 = Disable Pre-emphasis
S17 Reserved 128 = Disable Pre-coding
S18 &Tn Test Timeout (sec) S35 Reserved
S19 Inactivity Timeout (min) S36 Reserved
S20 Reserved S37 Reserved
S21 Break Length (1/100sec) S38 Disconnect Wait Time (sec)
S22 Xon Char S39 Reserved
S23 Xoff Char S40 Reserved
S24 Reserved S41 Reserved
S25 DTR Recognition Time (1/100sec) S42 Reserved
Default U.S. Profile. Please see countries listed below for differences.
-------------------------
B: 0 E: 1 F: 1
L: 2 M: 1 Q: 0
V: 1 X: 4 Y: 2
&A: 3 &B: 1 &C: 1
&D: 2 &G: 0 &H: 1
&I: 0 &K: 1 &M: 4
&N: 0 &P: 0 &R: 2
&S: 0 &T: 5 &U: 0
&Y: 1
S00: 000 S01: 000 S02: 043 S03: 013
S04: 010 S05: 008 S06: 004 S07: 060
S08: 002 S09: 006 S10: 014 S11: 070
S12: 050 S13: 000 S14: 000 S15: 000
S16: 000 S17: 000 S18: 000 S19: 000
S20: 000 S21: 010 S22: 017 S23: 019
S24: 010 S25: 005 S26: 000 S27: 000
S28: 008 S29: 020 S30: 000 S31: 128
S32: 002 S33: 032 S34: 000 S35: 000
S36: 014 S37: 000 S38: 000 S39: 000
S40: 003 S41: 000
AUSTRALIA: &G: 2 S00: 003 S06: 002
S11: 075 S27: 001 S39: 014
S40: 002
AUSTRIA: &G: 2 S00: 001 S06: 003
S07 040 S08: 004 S11: 080
S39 013 S40: 002
BELGIUM: &G: 2 S00: 002 S06: 002
S27: 001 S39: 010 S40: 000
CANADA: Same as the U.S.
CHINA: &P: 1 S00: 001 S06: 002
S39: 012 S40: 002
DENMARK: &G: 2 S00: 002 S07: 055
S39: 012 S40: 002
FINLAND: S00: 002 S06: 003 S07: 055
S39: 012 S40: 002
FRANCE: &G: 2 &P: 1 S00: 003
S06: 002 S07: 145 S39: 009
S40: 000
GERMANY: X: 5 &G: 2 &P: 1
S00: 001 S06: 003 S27: 001
HONG KONG: Same as the U.S.
IRELAND: &G: 2 S00: 001 S06: 002
S27: 001 S39: 012 S40: 002
ITALY: S00: 001 S06: 003 S08: 004
S11: 085 S19: 005 S27: 017
S39: 012 S40: 002
JAPAN: &G: 2 S07: 055 S08: 003
S27: 001 S39: 015 S40: 001
MALAYSIA: Same as the U.S.
NETHERLANDS: S00: 002 S06: 003 S27: 001
S39: 010 S40: 000
NEW ZEALAND: S11: 075 S27: 001 S39: 013
S40: 002 S40: 002
NORWAY: S00: 001 S11: 075 S27: 001
S40: 002
PORTUGAL: S00: 002 S06: 003 S11: 080
S27: 024 S39: 012 S40: 002
SINGAPORE: S11: 073
SOUTH AFRICA: &P: 1 S06: 003 S07: 050
S27: 001 S39: 012 S40: 002
SOUTH KOREA: Same as the U.S.
SPAIN: &G: 2 S00: 001 S06: 002
S11: 136 S39: 011 S40: 022
SWEDEN: S00: 001 S06: 002 S07: 059
S11: 080 S27: 001 S40: 002
SWITZERLAND: S00: 002 S06: 002 S27: 001
S39: 014 S40: 000
TAIWAN: Same as the U.S.
THAILAND: Same as the U.S.
UK: &G: 2 S11: 072 S27: 001
S39: 011 S40: 002
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.