1. 5625-unkg-v90b2w95.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (5625-unkg-v90b2w95.exe)

README.TXT
==========
V.90 standard Windows 95 Flash upgrade utility for 
the 56K* Professional Message modem
--------------------------------------------------

Congratulations on having a U.S. Robotics brand V.90 flash 
upgradeable modem ! Be sure to have your modem attached to 
a Communication (COM) Port on your computer via a serial 
cable, and switched on.

			-----------------------------------
Settings
--------
1) If you have changed your settings from the default, record 
   the new settings displayed in the ATI5 screen.
2) Disconnect the modem from the PSTN telephone network.
3) Flash the modem using the PMW95.EXE file - Flash utility usage
   detailed below.
4) Power cycle the modem (i.e. turn the modem off for ~5 secs, 
   and then turn it back on)
5) From a terminal (or terminal program) enter
   AT&F1&W <return>
   AT+MCB=1+MCT=0+MCW <return>

			-----------------------------------

Flash utility usage
-------------------
3a) From your Windows 95 system menu, select My Computer, then select the floppy drive.
3b) Select PMW95.EXE and double click on it to run the utility.
    The V.90 upgrade utility will now load into your computers memory.
3c) The V.90 upgrade utility automatically scans your COM Ports to find
    your flash upgradeable modem.
    You will see 'U.S. Robotics modem found' appear in one of the communication 
    port fields on your screen. Ensure that this is the correct modem, then 
    click on FLASH! to download V.90 onto your modem.

			-----------------------------------

You may now use your new V.90 modem. 

All U.S. Robotics brand UK modems are BABT approved and CE Marked, 
and are supplied with a five year warranty and free lifetime 
technical support.

* Download speeds up to 56k, pending line conditions.

			-----------------------------------
NEW FEATURES
------------

V.90
----
Support of this ITU recommendation at 56Kbps. 3Com’s X2 modulation 
is still supported, the connection in either modulation is automatic 
and does not require any change or specific set-up.

MSG LED
-------
1) Blinks red for any new fax messages received.

2) Blinks green for any new voice messages received.

3) Steady amber when all messages have been retrieved or checked.

The steady amber state is intended to warn the user that portions 
of the memory are being used by messages already retrieved or checked.

IMPORTANT : 
An unsuccessful call will ALSO turn the MSG led to amber even if 
the memory of the modem seems empty. The type of unsuccessful calls 
can be :
- The calling party hung up during the welcome message. 
- A fax call was received while your modem was configured for Voice 
  only mode
- A voice call was received while your modem was configured for fax 
  only mode

These events use a small amount of memory each time they occur and 
therefore turn the MSG led to amber. Generally, you cannot retrieve 
these « false » messages.

To turn the MSG led off, simply erase the modem’s memory using your 
supplied software application or via the DEL button.

Manual reception of fax
-----------------------
When the modem is in self-mode, you can now start a fax reception by 
depressing the STOP/PLAY button for 2 seconds. For this function to 
operate, the call will need to be answered in speakerphone mode (with the 
SPKR button) or via the attached handset.

Last updated: 11 May 1998.

			-----------------------------------