------------------------------------------------------------------ Philips PSC602 PCI Sound Card information File February 5, 2002 ------------------------------------------------------------------ PSC602 Driver Installation Instructions ======================================= You may want to print this file before initiating the install. 1. Download the appropriate Self-Extracting exe file to a location (folder or desktop) on your computer. Be sure to remember this location for use during the install process. See below for info about which driver file to download. PSC602_DOS_ENG_Vxxx.exe for Windows DOS PSC602_W95_ENG_Vxxx.exe for Windows 95OSR2 PSC602_W98_ENG_Vxxx.exe for Windows 98 PSC602_WSE_ENG_Vxxx.exe for Windows 98SE PSC602_WME_ENG_Vxxx.exe for Windows ME PSC602_WNT_ENG_Vxxx.exe for Windows NT4.0 PSC602_W2K_ENG_Vxxx.exe for Windows 2000 PSC602_WXP_ENG_Vxxx.exe for Windows XP 2. Locate and double click the self-extracting exe file you just downloaded. The WinZip Self-Extractor application will open. 3. Click on "Unzip" in the WinZip Self-Extractor pop-up window. NOTE: The PSC driver files will be extracted and copied to a default folder, the folder will be named "C:\PSC602_XXX_ENG_VXXX" Where: XXX = DOS or W95 or W98 or WSE or WME or WNT or W2K or WXP VXXX = Driver Version # If desired, you can designate a different folder by clicking on "Browse" and selecting the desired folder. (Philips recommends using the default folder.) 4. After extracting the driver files close the WinZip Self-Extractor application. 5. Uninstall all audio drivers currently installed. Use the Windows Add/Remove Programs to remove Philips PSC602 Audio Driver from the PC system. IMPORTANT NOTE: If you have an audio device built into your motherboard you must disable it in BIOS. There may be 1 - 3 items in BIOS that must be disabled. Additionally there may be jumpers on the mother- board that have to be set to fully disable the on-board sound hardware. Refer to your Motherboard documentation and or the board manufacture for assistance. Reboot your computer. During the reboot process the Philips Sound Card will be recognized, this will start the PSC driver installation process. 7. Use the Browse button to point the Add "New Hardware Wizard" to the location of the driver files: I.E. C:\PSC602_XXX_ENG_VXXX\Drivers\WINXX. If you extracted the PSC driver files to a folder other than the default folder, point to that location by using the Browse button. NOTE: Another method for installing the driver is to cancel the "New Hardware Found" Wizard then go to the folder that contains the extracted driver set and double click on the setup.exe program. This method will somewhat automate the install process, just follow the simple instructions to complete the process. 8. Your installation is finished. It is recommended that you retain the extracted file structure. This structure contains files that are required for uninstalling the PSC602 driver set. ------------------------------------------------------------------- ------------------------------------------------------------------- PSC602 DRIVER CHANGE LOG =================================================================== This change log only generalizes the changes made to the drivers. The details of the changes are considered confidential and are not intended for release to the public. =================================================================== Congratulations on your purchase of a Philips PCI Sound Card. This file will summarize the changes to the driver set. ------ Version 2.00 ------- - Initial downloadable driver set. - Improves analog joystick operation. - Sound Distortion and noise issues fixed on KT133 chipsets. - Volume Control Panel ICON enabled in XP SysTray after boot. - NT install strings updated. - Philips Logo Bit map removed. - Volume Control panel renamed to Philips PSC602 on all OS's. - Uninstall issues fixed. - Invalid Volume sliders removed from XP Volume Control Panel. - Philips Software WaveTable fixed on Win 95/98. - CD Mute control now properly handled when sound recorder is used. - Gameport Joystick is not installed properly on win95 (OSR2) & Intel 810 chipset. See microsoft web page for a notice on this problem. http://support.microsoft.com/support/kb/articles/Q138/0/82.asp?LN= EN-US&SD=gn&FR=0&qry=game%20port&rnk=4&src=DHCS_MSPSS_gn_SRCH&SPR=W95 ------ Version 3.00 ------- - New golden CD Release & down-loadables to web page . - IIS slider in the volume control panel removed - Voice Commands under Volume Control properties->Other (Win 98) removed. - Recording Volume Mixer slider fixed to control recording volume level. - Volume icon fixed so it will appear in the taskbar under XP. - Uninstall bug on win98 fixed. - Bad text strings on Win NT corrected. - Inappropriate text under MIDI tab of MulitMedia Properties for the MPU-401 device corrected. - CD Unmute when opening and closing the control panel fixed. - Mixer as recording source fixed to record external sources. - Improper graphics during install and un-install fixed. ------ Version 3.10 ------- - Released as Web udate version only. - Fixes NT4.0 "Sound Application" start-up failures. - Fixes lost L/R sound channel after boot up. TECHNICAL SUPPORT ================= - Toll-Free Telephone Number 1-800-835-3506 Operating Hours (US Central Time) - Monday through Friday 7:00am - 11:00pm - Saturday & Sunday 8:00am - 10:00pm - Internet Address: http://www.pcsound.philips.comDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.