Windows NT driver version ALG28.A1.30 Date: 97/01/10
for ALG2564/25128, 2032/2064, 2301/228
Instructions for Installing an Avance Logic Video Card in Conjunction with
Windows NT
Case1: Windows 95 is not installed on the system and an Avance Logic video
card is Installed on the system motherboard.
1. Install Windows NT by following the manufacturer's installation
procedure.
2. Double click on the My Computer icon when the installation is
complete to bring up the My Computer window.
3. Double click on the Control Panel icon to bring up the Control
Panel window.
4. Double click on the Display icon to bring up the Display
Properties window.
5. Click on the Settings tab to bring the Settings page of the
Display Properties window to the front.
6. Click on the [ Display Type] button to bring up the
Display Type window.
7. Click on the [Change] button in the Adapter Type section of
this window to bring up the [Change Display] window.
8. Click on the [Have Disk] button to bring up th [Install From Disk]
window. Follow the instructions in this window for inserting the
diskette containing the driver into the selected diskette drive
and then click on the [OK] button to bring up another Select
Device window.
9. Insure that "Avance Logic,INC. ALGXXXX(your display type)" is
highlighted for your display in the [Change Display] window and
then click on the [OK] button. The [Third-parties Driver] window
will appear and click on "Yes" to proceed. The [Installation
Driver] window will appear and click on "OK" to reboot in order
for the changes to take effect. Close all windows and click on
"Yes" for the system to reboot in the [System Settings Change]
window.
10. To change display setting, double click on the Display icon to
bring up the [Display Properties] window.
11. Click on the Settings tab to bring the Settings page of the
[Display Properties] window to the front.
12. Select desired resolution, color, or/and font size from
"Color Palette", " Desktop Area" or/and "Font size" sections
of the [Display Properties] window.
13. Click on "Test" button to see if your selected mode has been
properly on the screen.
14. Click on the "Apply" button in the [Display Properties] window to
activate the new settings.
Case 2: Windows NT is installed on the system and a video card other than an
Avance Logic video card is installed on the system motherboard.
Note: It is recommend that the video mode be set to Standard VGA
before beginning this installation.
1. Power of the system, remove the existing video card, and install
the Avance Logic video card.
2. Double click on the My Computer icon when the installation is
complete to bring up the My Computer window.
3. Double click on the Control Panel icon to bring up the Control
Panel window.
4. Double click on the Display icon to bring up the Display
Properties window.
5. Click on the Settings tab to bring the Settings page of the
Display Properties window to the front.
6. Click on the [ Display Type] button to bring up the
Display Type window.
7. Click on the [Change] button in the Adapter Type section of
this window to bring up the [Change Display] window.
8. Click on the [Have Disk] button to bring up the [Install From Disk]
window. Follow the instructions in this window for inserting the
diskette containing the driver into the selected diskette driver
and then click on the [OK] button to bring up another Select
Device window.
9. Insure that "Avance Logic,INC. ALGXXXX(your display type)" is
highlighted for your display in the [Change Display] window and
then click on the [OK] button. The [Third-parties Driver] window
will appear and click on "Yes" to proceed. The [Installation
Driver] window will appear and click on "OK" to reboot in order
for the changes to take effect. Close all windows and click on
"Yes" for the system to reboot in the [System Settings Change]
window.
10. To change display setting, double click on the Display icon to
bring up the [Display Properties] window.
11. Click on the Settings tab to bring the Settings page of the
[Display Properties] window to the front.
12. Select desired resolution, color, or/and font size from
"Color Palette", " Desktop Area" or/and "Font size" sections
of the [Display Properties] window.
13. Click on "Test" button to see if your selected mode has been
properly on the screen.
14. Click on the "Apply" button in the [Display Properties] window to
activate the new settings.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.