Sierra Software: Windows 95 Unimodem V drivers
Version: SC1.1D.A2 (Based on SC1.1D)
Date: 8/19/96
- Modified 28.8->33.6 (SQ3460,SQ3465,SQ3465VV,SQ3480,SQ3485)
- MCT Tested Pass with Firmware: 2.5232 with CallerID disabled.
- Please read UPDATE INF... Section to update new INFs.
File: mdsiervw.inf
For Sierra intergrated Modems:
SQ3228,SQ329,SQ3230, SQ3260,
SQ3265,SQ3460,SQ3465External,
SQ3465VW,SQ3480,SQ3470,SQ3480.
File: mdmsier.inf (only SQ3465 with Voice)
Hardware Description: Sierra 28800 PnP SQ3465
PnP Dev. ID: ISAPNP\SSC0101_DEV0000
PnP Dev. ID: ISAPNP\SSC0101_DEV0001 (ModemVoice)
Unimodem Dev. ID: UNIMODEM3B65849A
Preferrable Compontent: Sound Card in the system
File: mdm3485.inf (only SQ3485 with Voice && VoiceView)
Hardware Description: Sierra 33600 PnP SQ3485
PnP Dev. ID: ISAPNP\SSC0109_DEV0000
PnP Dev. ID: ISAPNP\SSC0109_DEV0001 (ModemVoice)
Unimodem Dev. ID: UNIMODEM3B65849A
Preferrable Compontent: Sound Card in the system
Release Note
============
Adding mdm3485.inf to support SQ3485 voice modem. Please test MCT29,
Win32 applications to SQ3485.
Known bugs
==========
None
Bugs fixed
==========
7/22/96
(1) set AT#VAB=2 for aborting recording when #VDT detected.
(2) adjusted maximum volume value for spkerphone mode
7/18/96
(1) change "DATE=" response message for caller ID return.
(2) enable CallerIDPrivate and CallerIDOutside keys with P and O.
(3) enable layout key in mdmsier.inf.
(4) add "<cr><lf>#VDT<cr><lf>" response message.
7/5/96
(1) Fixed music on hold. This required new mdmsier.inf, unimdm.tsp and
firmware ver. 2.45d+.
(2) Get more time for speakerphone training, need spktrn32.dll updated.
7/1/96
(1) SpeakphoneTaps is saved in registry properly and download to
DSP everytime when speakphone is activated.
6/28/96
(1) Enhance UART rate. (V2.44A4+ firmware required.)
6/25/96
(1) Hang-up problem in speakerphone mode. (Originate.)
(2) FAX CNG detection when voice answer mode.
(3) INF file has been modified to support "Sierra PNP SQ3645" only.
UPDATE INF From Old "inf" Files
===============================
(1) change directory to c:\windows\inf.
(2) delete mdmsier.inf, mdsiervw.inf, siervoic.inf (if they existed)
(3) delete oem?.inf whose manufacture is Sierra.
Set-up to use MSPhone with old mdmsier.inf
==========================================
(1) Make sure you have installed modem first and MS phone, ignore warning
message when you installe MS Phone.
(2) Copy *.inf to \windows\inf
(3) Copy *.vxd, *.dll, *.drv, *.tsp, *.cpl to \windows\system
(4) Open Control Panel, System icon, device manager,
Select Modem - Sierra's 28800 modem, click 'remove' button,
Select ModemVoice - Sierra's voice, click 'remove' button
(5) In device manager, click 'Refresh', to rebuild registry for modem
(6) Open Control Panel, Modems icon, select Sierra's modem, click 'properities,
click, SpeakerPhone, click Train Now, in order to train speakerphone.
(7) You should be able to start MS phone.
Watch Out:
* If you install MS phone after you copy all Unimodem V components, MS phone
setup will overwrite some componts.
File catergories:
=================
Readme.txt
----Fax Update drivers------
AWCL1_32 DLL
AWFXIO32 DLL
----VoiceView Files----------
fte.dll
filexfer.exe
filexfer.hlp
filexfer.cnt
vtdi.386
vvexe32.exe
wsvv.vxd
wsock32.dll
wsock.vxd
----INF Files----------------
SIERVOIC INF
SIERWAVE INF
MDSIERVW INF
----Voice & Wave files--------
Modemui.dll
Serialui.dll
Spktrn16.dll
Spktrn32.dll
Umdm16.dll
Umdm32.dll
Umdmxfrm.dll
Vmodctl.dll
Modem.cpl
Unimodem.vxd
Unimdm.tsp
Serwvdrv.drv
Serwave.vxd
Wavewrap.drv
Files
=====
AWCL1_32 DLL 22,528 01-30-96 11:43p AWCL1_32.DLL
AWFXIO32 DLL 44,032 01-30-96 11:42p AWFXIO32.DLL
FILEXFER EXE 48,128 11-16-95 1:00a FILEXFER.EXE
FILEXFER HLP 14,007 11-16-95 1:00a FILEXFER.HLP
FILEXFER CNT 342 11-16-95 1:00a FILEXFER.CNT
FTE DLL 53,248 11-16-95 1:00a FTE.DLL
MDM3485 INF 20,289 07-29-96 2:17p mdm3485.inf
MDMSIER INF 17,809 07-26-96 2:53p MDMSIER.INF
MDSIERVW INF 27,452 07-29-96 1:23p mdsiervw.inf
MODEM CPL 52,080 03-11-96 7:07a MODEM.CPL
MODEMUI DLL 37,792 03-11-96 7:08a MODEMUI.DLL
README TXT 5,419 07-29-96 2:09p README.TXT
SERIALUI DLL 12,032 03-11-96 7:08a SERIALUI.DLL
SERWAVE VXD 14,188 01-12-96 12:17p SERWAVE.VXD
SERWVDRV DRV 12,096 06-24-96 3:26p SERWVDRV.DRV
SIERVOIC INF 1,196 05-21-96 10:40a SIERVOIC.INF
SIERWAVE INF 2,395 07-26-96 2:09p Sierwave.inf
SPKTRN16 DLL 1,504 03-11-96 7:07a SPKTRN16.DLL
SPKTRN32 DLL 9,216 07-05-96 2:53p SPKTRN32.DLL
UMDM16 DLL 2,096 03-11-96 7:07a UMDM16.DLL
UMDM32 DLL 6,144 03-11-96 7:07a UMDM32.DLL
UMDMXFRM DLL 14,448 03-11-96 7:07a UMDMXFRM.DLL
UNIMDM TSP 43,072 07-05-96 5:42p UNIMDM.TSP
UNIMODEM VXD 55,439 07-11-96 4:09p UNIMODEM.VXD
VMODCTL DLL 4,096 10-31-95 12:00a VMODCTL.DLL
VTDI 386 5,687 11-16-95 1:00a VTDI.386
VVEXE32 EXE 10,240 11-16-95 1:00a VVEXE32.EXE
WAVEWRAP DRV 18,480 03-11-96 7:07a WAVEWRAP.DRV
WSOCK VXD 15,522 11-16-95 1:00a WSOCK.VXD
WSOCK32 DLL 66,560 11-16-95 1:00a WSOCK32.DLL
WSVV VXD 92,244 11-16-95 1:00a WSVV.VXD
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.