;**************************************************************************** ; ; NovaLan PCMCIA Card Install ; ; Written by: Jasper Pan ; Date: 03/10/96 ; ; Copyright (c) 1996, Nita Computer Solutions, Inc. ; ;**************************************************************************** [Version] LayoutFile=layout.inf Provider=%String0% Signature=$CHICAGO$ Class=Net [Manufacturer] %String1%=NITA [NITA] %String2%=NovaLink.Install,MF\Nita_1 [DestinationDirs] DefaultDestDir=11 NovaLink.CopyFiles=11 [NovaLink.Install] AddReg=NovaLink.Add.Reg,NovaLink.Drv.Parms,NovaLink.CIS.Override CopyFiles=NovaLink.CopyFiles [NovaLink.CopyFiles] NovaLink.vxd [NovaLink.Add.Reg] HKR,Ndi,DeviceID,0,PCMCIA\Eiger_Labs_Inc.-EPX-ET2880-0000 HKR,,DevLoader,0,*ndis HKR,,DeviceVxDs,0,NovaLink.vxd HKR,,EnumPropPages,0,"netdi.dll" HKR,NDIS,LogDriverName,0,"NovaLink" HKR,NDIS,MajorNdisVersion,HEX,03 HKR,NDIS,MinorNdisVersion,HEX,0A HKR,Ndi\Interfaces,DefUpper,0,"ndis3" HKR,Ndi\Interfaces,DefLower,0,"ethernet" HKR,Ndi\Interfaces,UpperRange,0,"ndis3" HKR,Ndi\Interfaces,LowerRange,0,"ethernet" HKR,NDI,CardType,0,"PCMCIA" [NovaLink.Drv.Parms] HKR,,IOBase,1,02,00,00,00 HKR,,Interrupt,1,04,00,00,00 HKR,,MemoryAddress,1,01,00,00,00 ;HKR,NDI\params\InterruptNumber,resc,1,04,00,00,00 ;HKR,Ndi\params\interruptNumber,ParamDesc,0,"InterruptLevel" ;HKR,NDI\params\InterruptNumber,flag,1,20,00,00,00 ;HKR,NDI\params\IOBaseAddress,resc,1,02,00,00,00 ;HKR,NDI\params\IOBaseAddress,ParamDesc,0,"I/OBaseAddress" ;HKR,NDI\params\IOBaseAddress,flag,1,20,00,00,00 ;HKR,NDI\params\AttributeMem,ParamDesc,0,"AttributeMemory" ;HKR,NDI\params\AttributeMem,resc,1,01,00,00,00 ;HKR,NDI\params\AttributeMem,flag,1,20,00,00,00 [NovaLink.CIS.Override] HKR,Override,0000,1, \ 00,04,00,00, \ 00,30,00,00, \ ; ; I/O Resource Descriptor 0 ; 24,00,00,00, \ ;Total length of I/O Resource Descriptor 02,00,00,00, \ ;ResType_IO = 0x00000002 01,00, \ ;IOD_Count; 20,00, \ ;IOD_Type; IOType_Range = 0x000C 20,01, \ ;IOD_Alloc_Base; 7f,03, \ ;IOD_Alloc_End; 00,00, \ ;IOD_DesFlags; 00, \ ;IOD_Alloc_Alias; 00, \ ;IOD_Alloc_Decode; F8,FF, \ ;IOR_Align; 20,00, \ ;IOR_nPorts; 00,00, \ ;IOR_Min; ff,ff, \ ;IOR_Max; 00,00, \ ;IOR_RangeFlags; 00, \ ;IOR_Alias; 00, \ ;IOR_Decode; 40,00,00,00, \ ;PCCARD flags, 0x40 = 16-bit port ; ; IRQ Resource Descriptor 0 ; 14,00,00,00, \ ;Total length of IRQ Resource Descriptor 04,00,00,00, \ ;ResType_IRQ = 0x00000004 00,00, \ ;IRQD_Flags; 0B,00, \ ;IRQD_Alloc_Num; B0,5C, \ ;IRQD_Req_Mask; 00,00, \ ;IRQD_Reserved; 70,00,00,00, \ ;PCCARD flags, 0x20 = Level mode interrupts ; ; MEM Resource Descriptor 0 ; 34,00,00,00, \ ;Total length of Memory Resource Descriptor 01,00,00,00, \ ;ResType_Mem = 0x00000001 01,00, \ ;MD_Count; 14,00, \ ;MD_Type; 00,10,0C,00, \ ;MD_Alloc_Base; FF,FF,FF,FF, \ ;MD_Alloc_End; 00,00, \ ;MD_Flags; 00,00, \ ;MD_Reserved; 00,F0,FF,FF, \ ;MR_Align; 00,40,00,00, \ ;MR_nBytes; 00,00,00,00, \ ;MR_Min; FF,FF,FF,FF, \ ;MR_Max; 00,00, \ ;MR_Flags; 00,00, \ ;MR_Reserved; 08,00,00,00, \ ;0x02 = attr or 0x08 = 16-bit common mem. 00,00,00,00, \ ;Memory card address. ; ; MEM Resource Descriptor 1 ; 34,00,00,00, \ ;Total length of Memory Resource Descriptor 01,00,00,00, \ ;ResType_Mem = 0x00000001 01,00, \ ;MD_Count; 14,00, \ ;MD_Type; 00,10,0C,00, \ ;MD_Alloc_Base; FF,FF,FF,FF, \ ;MD_Alloc_End; 00,00, \ ;MD_Flags; 00,00, \ ;MD_Reserved; 00,F0,FF,FF, \ ;MR_Align; 00,20,00,00, \ ;MR_nBytes; 00,00,00,00, \ ;MR_Min; FF,FF,FF,FF, \ ;MR_Max; 00,00, \ ;MR_Flags; 00,00, \ ;MR_Reserved; 02,00,00,00, \ ;0x02 = attr or 0x08 = 16-bit common mem. 00,00,00,00, \ ;Memory card address. ; ; REQUEST_CONFIG_PKT Descriptor ; 19,00,00,00, \ ;Total length of REQUEST_CONFIG_PKT Descriptor 7c,89,00,00, \ ;(ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ;Socket; 02,00, \ ;Attributes; 32, \ ;Vcc; 32, \ ;Vpp1; 32, \ ;Vpp2; 02, \ ;IntType; 20,10,00,00, \ ;ConfigBase 00, \ ;Status; 00, \ ;Pin; 00, \ ;Copy; 57, \ ;ConfigIndex. F7, \ ;Present. ; ; TERMINATOR ; 00,00,00,00 [Strings] String0="Microsoft" String1="Eiger Labs, Inc." String2="Eiger Labs PCMCIA EPX-ET2880 (LAN)"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.