MFMACT.INF Driver File Contents (lan336a.exe)

; Windows Multifunction Setup File
; Copyright (c) 1993-1995 Microsoft Corporation
; Manufacturer: 
; Version 2.00

[Version]
Signature=$CHICAGO$
Class=MultiFunction
Provider=%MS%
LayoutFile=layout.inf

[Manufacturer]
%Mfg%=ACT

[ACT]
%EF1%=EF.MF,PCMCIA\ActionTec_Electronics__Inc.-LAN_and_Modem_144-6281
%EF2%=EF.MF,PCMCIA\ActionTec_Electronics__Inc.-LAN_and_Modem_288-A8C7
%EF3%=EF.MF,PCMCIA\PMX__Multifunction__Card___-LAN_and_Modem_144-E60D
%EF4%=EF.MF,PCMCIA\PMX__Multifunction__Card___-LAN_and_Modem_288-378F
%EF5%=EF.MF,PCMCIA\Multifunction_Card-LAN_and_Modem_144-209B
%EF6%=EF.MF,PCMCIA\Multifunction_Card-LAN_and_Modem_288-485D
%EF7%=EF.MF,PCMCIA\Multifunction_Card-LAN_and_Modem_336-E5FE

[Strings]
MS="Microsoft"
Mfg=""
EF1="LAN and Modem 144"
EF2="LAN and Modem 288"
EF3="LAN and Modem 144"
EF4="LAN and Modem 288"
EF5="LAN and Modem 144"
EF6="LAN and Modem 288"
EF7="LAN and Modem 336"
DiskDesc="LAN and Modem Setup Disk"

[SourceDisksNames]
42 = %DiskDesc%,,0

[SourceDisksFiles]
comnet.vxd=42,,36948
netact.inf=42,,1898
mdmact.inf=42,,20594

[DestinationDirs]
EF.CopyINF = 17
EF.CopyVXD = 11

[EF.CopyINF]
netact.inf
mdmact.inf

[EF.CopyVXD]
comnet.vxd

[EF.MF]
AddReg=StandardMF.Reg,ADDREG_EF.reg
CopyFiles=EF.CopyINF,EF.CopyVXD

[EF.MF.HW]
AddReg=EF.MF.RegHW

[EF.MF.RegHW]
HKR,Child0000,HardwareID,,MF\EF_DEV1
HKR,Child0000,ResourceMap,1,00,02               ;Fax Modem
HKR,Child0001,HardwareID,,MF\EF_DEV0
HKR,Child0001,ResourceMap,1,00,01,02,03,04      ;Ethernet

[StandardMF.Reg]
HKR,,DevLoader,0,*CONFIGMG
HKR,,Enumerator,0,*CONFIGMG
HKR,,CMDrivFlags,1,03,00,00,00

[ADDREG_EF.reg]
;
; OVERRIDE for COM2
;
HKR,Override,0000,1, \
;
; CONFIGMG_VERSION
;
00,04,00,00, \
;
; PRIORITY
;
00,30,00,00, \
;
;
; OVERRIDE for COM2
;
; I/O Resource Descriptor 0: COM port
;
48,00,00,00, \          ; Total length of I/O Resource Descriptor
02,00,00,00, \          ; ResType_IO = 0x00000002
04,00, \                ; IOD_Count;
0C,00, \                ; IOD_Type;         // IOType_Range = 0x000C
00,00, \                ; IOD_Alloc_Base;
00,00, \                ; IOD_Alloc_End;
00,00, \                ; IOD_DesFlags;
00, \                   ; IOD_Alloc_Alias;
00, \                   ; IOD_Alloc_Decode;
; COM1
F8,FF, \                ; IOR_Align;        // Mask for base alignment E0/F0
08,00, \                ; IOR_nPorts;       // Number of ports, pony=10
F8,03, \                ; IOR_Min;          // Min port address
FF,03, \                ; IOR_Max;          // Max port address
00,00, \                ; IOR_RangeFlags;   // Flags
00, \                   ; IOR_Alias;        // Alias offset
00, \                   ; IOR_Decode;       // Address specified
; COM2
F8,FF, \                ; IOR_Align;        // Mask for base alignment E0/F0
08,00, \                ; IOR_nPorts;       // Number of ports, pony=10
F8,02, \                ; IOR_Min;          // Min port address
FF,02, \                ; IOR_Max;          // Max port address
00,00, \                ; IOR_RangeFlags;   // Flags
00, \                   ; IOR_Alias;        // Alias offset
00, \                   ; IOR_Decode;       // Address specified
; COM3
F8,FF, \                ; IOR_Align;        // Mask for base alignment E0/F0
08,00, \                ; IOR_nPorts;       // Number of ports, pony=10
E8,03, \                ; IOR_Min;          // Min port address
EF,03, \                ; IOR_Max;          // Max port address
00,00, \                ; IOR_RangeFlags;   // Flags
00, \                   ; IOR_Alias;        // Alias offset
00, \                   ; IOR_Decode;       // Address specified
; COM4
F8,FF, \                ;   IOR_Align           // 8 byte align
08,00, \                ;   IOR_nPorts          // 8 ports
E8,02, \                ;   IOR_Min
EF,02, \                ;   IOR_Max
00,00, \                ;   IOR_RangeFlags
00, \                   ;   IOR_Alias
00, \                   ;   IOR_Decode
;
64,00,00,00, \          ; PCCARD flags, 0x40 = 16-bit port
;
; I/O Resource Descriptor 1
;
24,00,00,00, \          ; Total length of I/O Resource Descriptor
02,00,00,00, \          ; ResType_IO = 0x00000002
01,00, \                ; IOD_Count;
0C,00, \                ; IOD_Type;         // IOType_Range = 0x000C
00,00, \                ; IOD_Alloc_Base;
00,00, \                ; IOD_Alloc_End;
00,00, \                ; IOD_DesFlags;
00, \                   ; IOD_Alloc_Alias;
00, \                   ; IOD_Alloc_Decode;
E0,FF, \                ; IOR_Align;        // Mask for base alignment E0/F0
20,00, \                ; IOR_nPorts;       // Number of ports, pony=10
00,01, \                ; IOR_Min;          // Min port address
FF,FF, \                ; IOR_Max;          // Max port address
00,00, \                ; IOR_RangeFlags;   // Flags
00, \                   ; IOR_Alias;        // Alias offset
00, \                   ; IOR_Decode;       // Address specified
64,00,00,00, \          ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor 0
;
14,00,00,00, \ ; Total length of IRQ Resource Descriptor
04,00,00,00, \ ; ResType_IRQ = 0x00000004
00,00, \       ; IRQD_Flags;
00,00, \       ; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \       ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \       ; IRQD_Reserved;
20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts
;
; MEM Resource Descriptor 0
;
34,00,00,00, \ ; Total length of Memory Resource Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \       ; MD_Count;
14,00, \       ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \ ; MD_Alloc_Base;
00,00,00,00, \ ; MD_Alloc_End;
00,00, \       ; MD_Flags;
00,00, \       ; MD_Reserved;
00,C0,FF,FF, \ ; MR_Align;         // Mask for base alignment
00,20,00,00, \ ; MR_nBytes;        // Count of bytes
00,00,00,00, \ ; MR_Min;      // Min Address
FF,FF,FF,FF, \ ; MR_Max;      // Max Address
00,00, \       ; MR_Flags;         // Flags
00,00, \       ; MR_Reserved;
02,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
	       ;         0x08 = 16-bit common mem
00,00,00,00, \ ; Memory card address
;
; MEM Resource Descriptor 1
;
34,00,00,00, \ ; Total length of Memory Resource Descriptor
01,00,00,00, \ ; ResType_Mem = 0x00000001
01,00, \       ; MD_Count;
14,00, \       ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \ ; MD_Alloc_Base;
00,00,00,00, \ ; MD_Alloc_End;
00,00, \       ; MD_Flags;
00,00, \       ; MD_Reserved;
00,C0,FF,FF, \ ; MR_Align;         // Mask for base alignment
00,40,00,00, \ ; MR_nBytes;        // Count of bytes
00,00,00,00, \ ; MR_Min;      // Min Address
FF,FF,FF,FF, \ ; MR_Max;      // Max Address
00,00, \       ; MR_Flags;         // Flags
00,00, \       ; MR_Reserved;
08,00,00,00, \ ; PCCARD flags, 0x02 = attribute mem, or
	       ;         0x08 = 16-bit common mem
00,40,00,00, \ ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \       ; Socket;
02,00, \       ; Attributes;
32, \          ; Vcc;
32, \          ; Vpp1; 78
32, \          ; Vpp2; 78
02, \          ; IntType;
20,10,00,00, \ ; ConfigBase;
08, \          ; Status;
00, \          ; Pin;
00, \          ; Copy;
57, \          ; ConfigIndex;
03, \          ; Present;
;
; TERMINATOR
;
00,00,00,00
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.09