; This INF file installs the Silicon Image 3531 SATA Controller ; for the SiI 3531 controller on systems running Windows 2000, Windows XP ; and Windows 2003. ; ; Copyright (C) 2006 by Silicon Image, Inc. ; All rights reserved [Version] Signature="$Windows NT$" Class=SCSIAdapter ClassGuid={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%SI% ; CatalogFile=Si3531.cat DriverVer=04/12/2006, 1.5.5.0 [SourceDisksNames] 1="Silicon Image SiI 3531 SATA Controller Installation Disk",Si3531.sys,, [SourceDisksFiles] Si3531.sys = 1 SilSupp.cpl = 1 SiWinAcc.sys = 1 [DestinationDirs] DefaultDestDir = 12 DllFiles = 11 [DriverFiles_NT_2K] Si3531.sys,,,0x20 [DriverFiles_XP] Si3531.sys,,,0x20 SiWinAcc.sys,,,0x20 [DllFiles] SilSupp.cpl,,,0x20 [Manufacturer] %SI%=SI_HDC,NTx86.5.1 [SI_HDC] %PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531, PCI\VEN_1095&DEV_3531&SUBSYS_35311095 %PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531, PCI\VEN_1095&DEV_3531&SUBSYS_320A1462 [SI_HDC.NTx86.5.1] %PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_35311095 %PCI\VEN_1095&DEV_3531.DeviceDesc%=SI_3531_XP, PCI\VEN_1095&DEV_3531&SUBSYS_320A1462 ;; Windows NT4.0 and Windows 2000 install sections ;; [SI_3531.NTX86] Copyfiles=DriverFiles_NT_2K, DllFiles [SI_3531.NTX86.Services] AddService=Si3531r5,0x00000002,SI_3531_Service_Install, Miniport_EventLog_Inst [SI_3531.NTX86.CoInstallers] Copyfiles=DllFiles AddReg = SI_3531_CoInstall_AddReg ;; Windows XP install sections ;; [SI_3531_XP] Copyfiles=DriverFiles_XP, DllFiles [SI_3531_XP.Services] AddService=Si3531r5,0x00000002,SI_3531_Service_Install, Miniport_EventLog_Inst AddService=SiFilter,0x00000000,FilterService_Install [SI_3531_XP.CoInstallers] Copyfiles=DllFiles AddReg = SI_3531_CoInstall_AddReg [SI_3531_CoInstall_AddReg] HKR,,CoInstallers32,0x00010000,"SilSupp.cpl, CoInstHandler" ; This will assure the Class driver sends down a Sync Cache before writting the ; hibernation file. [SI_3531_XP.HW] AddReg=SI_3531_AddHackMask.AddReg [SI_3531_AddHackMask.AddReg] HKR, "Classpnp", "HackMask",0x00010001, 0x10 [SI_3531_Service_Install] DisplayName=%SI3531.SvcDesc% ServiceType=1 StartType=0 ErrorControl=1 ServiceBinary=%12%\Si3531.sys LoadOrderGroup=Scsi miniport AddReg=PnPSupport_AddReg AddReg=PortConfigure_AddReg AddReg=ProblemDeviceList_AddReg AddReg=SupportedSubSystemIds_AddReg [FilterService_Install] DisplayName=SATALink driver accelerator ServiceType=1 StartType=0 ErrorControl=0 ServiceBinary=%12%\SiWinAcc.sys LoadOrderGroup=Filter ; Mark device as supporting Plug & Play on the PCI(5) bus. [PnPSupport_AddReg] HKR,Parameters\PnPInterface,5,0x00010001,1 [PortConfigure_AddReg] HKR,Parameters\Device,MaximumSGList,0x00010001, 33 HKR,Parameters\Device,NumberOfRequests,0x00010001, 124 ; List of devices with known configuration issues. [ProblemDeviceList_AddReg] HKR,ProblemDevices HKR,ProblemDevices, %ProblemDev1Name%, 0, %ProblemDev1Value% HKR,ProblemDevices, %ProblemDev2Name%, 0, %ProblemDev2Value% HKR,ProblemDevices, %ProblemDev3Name%, 0, %ProblemDev3Value% HKR,ProblemDevices, %ProblemDev4Name%, 0, %ProblemDev4Value% HKR,ProblemDevices, %ProblemDev5Name%, 0, %ProblemDev5Value% HKR,ProblemDevices, %ProblemDev6Name%, 0, %ProblemDev6Value% ; List of controller subsystem IDs to be supported by the Si3531.sys driver on ; NT/Win2K/XP systems. [SupportedSubSystemIds_AddReg] HKR,SupportedSubsystemIDs,%PCI\VEN_1095&DEV_3531.DeviceDesc%,0x00010001, 0x35311095 HKR,SupportedSubsystemIDs,%PCI\VEN_1095&DEV_3531.DeviceDesc%,0x00010001, 0x320A1462 ;************************************************************* ;The NT EventLog entries are the same for all SCSI miniports. [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,0x00010001,7 [Strings] SI="Silicon Image" PCI\VEN_1095&DEV_3531.DeviceDesc="Silicon Image SiI 3531 SATA Controller" SI3531.SvcDesc="SiI-3531 SATA Controller" ; Registry value names to use for PCI subsystem ID values assigned by third parties ; using the 3x12 controller. SI3531_SUB_ID_DESC_MSI="Silicon Image SiI 3531 SATALink Controller (MSI)" ProblemDev1Name="Maxtor 4D060H3 DAK05GK0" ProblemDev1Value="MaxMode = UDMA-5" ProblemDev2Name="HDS724040KLSA80 KFAOA32A" ProblemDev2Value="DisableAtaQueueing" ProblemDev3Name="HDS722525VLSA80 V36OA6MA" ProblemDev3Value="DisableAtaQueueing" ProblemDev4Name="HDS722516VLSA80 V34OA6MA" ProblemDev4Value="DisableAtaQueueing" ProblemDev5Name="Maxtor 7B250S0 BANC1B70" ProblemDev5Value="DisableSataQueueing" ProblemDev6Name="HTS541060G9SA00 MB3OC60D" ProblemDev6Value="DisableSataQueueing"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.