;*****************************************************************************
;
; Name: klsivxd.inf
;
; Function:
; Install USB VCOMM drivers
;
; Copyright (c) 1997-2000 Moore Computer Consultants, Inc.
;
; $Id: upper.inf,v 1.9 2000/09/01 05:01:00 tmm Exp $
;
; KLSI is a trademark of Kawasaki LSI
;
;*****************************************************************************
[Version]
signature="$CHICAGO$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Provider%
DriverVer=09/29/2000, 3.16.0.400
;-----------------------------------------------------------------------------
; No files are copied by this file.. no filecopy init declarations are here.
;-----------------------------------------------------------------------------
;-----------------------------------------------------------------------------
; Table of Contents
;-----------------------------------------------------------------------------
[Manufacturer]
%KLSI%=KLSI
;-----------------------------------------------------------------------------
; Device-by-device entries
;-----------------------------------------------------------------------------
[KLSI]
%SerialD%=KLSI.Install, KLSICR\{8e5e1f43-a950-11d3-b72b-0060088d7801}
%SerialC%=KLSI.Install, KLSICR\{8e5e1f42-a950-11d3-b72b-0060088d7801}
%SerialB%=KLSI.Install, KLSICR\{8e5e1f41-a950-11d3-b72b-0060088d7801}
%SerialA%=KLSI.Install, KLSICR\{8e5e1f40-a950-11d3-b72b-0060088d7801}
%Serial%=KLSI.Install, KLSICR\{8e5e1f44-a950-11d3-b72b-0060088d7801}
;-----------------------------------------------------------------------------
; The exclude-from-select stuff
;-----------------------------------------------------------------------------
[ControlFlags]
ExcludeFromSelect = *
;-----------------------------------------------------------------------------
; Installation instructions
;-----------------------------------------------------------------------------
[KLSI.Install]
AddReg = KLSI.W95AddReg,KLSI.W95Overrides
[KLSI.Install.Nt]
;-----------------------------------------------------------------------------
; Registry
;-----------------------------------------------------------------------------
;**** here's the stuff for W95 ports.
;**** it's in this INF file, but we'll not use it until we get enumerated.
[KLSI.W95AddReg]
HKR,,DevLoader,,*vcomm
HKR,,PortDriver,,klsicomm.vxd
HKR,,Contention,,klsivcd.vxd
HKR,,DCB,3,1C,00,00,00, 00,C2,01,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,PortSubClass,1,01
HKR,,ConfigDialog,,serialui.dll
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"
;-----------------------------------------------------------------------------
; Logical Configurations
;-----------------------------------------------------------------------------
[KLSI.W95Overrides]
;
;--- Config for anywhere- COMx IRQ Any
HKR,Override,0000,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \ ; total length of io resource descriptor
02,00,00,00, \ ; ResType_IO = 0x00000002
01,00,0C,00, \ ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \ ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \ ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \ ; IOR_Align / IOR_nPorts
00,01,FF,03, \ ; IOR_Min / IOR_Max
00,00,00,00, \ ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** IRQ ***
10,00,00,00, \ ; total length of irq resource descriptor
04,00,00,00, \ ; ResType_IRQ - 0x00000004
01,00,00,00, \ ; IRQD_Flags / IRQD_Alloc_Num
FF,FF,00,00, \ ; IRQD_Req_Mask / IRQD_Reserved
;*** TERMINATOR ***
00,00,00,00
;
;--- Config for anywhere- COMx IRQ None
HKR,Override,0001,1, \
00,04,00,00,00,00,00,00, \
;*** I/O Range 0 ***
20,00,00,00, \ ; total length of io resource descriptor
02,00,00,00, \ ; ResType_IO = 0x00000002
01,00,0C,00, \ ; IOD_count / IOD_Type = 0x0c
00,00,00,00, \ ; IOD_Alloc_Base / IOD_Alloc_End
00,00,00,00, \ ; IOD_DesFlags / IOD_Alloc_Alias / IOD_Alloc_Decode
F8,FF,08,00, \ ; IOR_Align / IOR_nPorts
00,01,FF,03, \ ; IOR_Min / IOR_Max
00,00,00,00, \ ; IOR_RangeFlags / IOR_Alias / IOR_Decode
;*** TERMINATOR ***
00,00,00,00
;-----------------------------------------------------------------------------
; STRINGS
;-----------------------------------------------------------------------------
[Strings]
;BEGIN ENG - US English Strings
Provider = "Kawasaki LSI"
KLSI = "Kawasaki LSI"
SerialA = "KLSI RS-232 J101"
SerialB = "KLSI RS-232 J102"
SerialC = "KLSI RS-232 J103"
SerialD = "KLSI RS-232 J104"
Serial = "KLSI USB to RS-232"
;END ENG - US English Strings
;--- strings following this line should not be localized ---
;*** end of file ***
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.