1. SIIG_SiS6326_AGP.exe Driver
2. OS2.TXT File Contents

OS2.TXT Driver File Contents (SIIG_SiS6326_AGP.exe)

OS/2 V3.0  (Warp)
**********************************************************************

Driver & OS/2 Version Notes
1.  The following description apply to "SiS 6326 Driver Release V1.00" 
    and maybe later release version but not guaranteed.  
2.  All the OS/2 Warp Versions up to SiS 6326 driver Rev. 1.00 would 
    be installed as described in this section except for Double Bytes 
    OS/2 Warp (i.e. Chinese, Japanese, Korea, etc.). 
3.  For Double Bytes OS/2 Warp installation, please refer to "Double 
    Bytes OS/2 Warp".

Driver Files
1.  The SiS 6326 OS/2 3.0 driver files resides on the 
    "\SI600A\OS2\SBCS.30" for single byte OS/2 Warp and 
    "\Si600A\OS2\DBCS.30" for double byte OS/2 Warp.
2.  The enclosed SiS 6326 OS/2 3.0 driver contains the following files:
    SISINST.CMD     SiS driver install program
    SVGA.EXE        SiS PMI Generator
    S768256.DL@     SiS IBMDEV32.DLL Display Driver
    OTHERS      other files required during installation

Installation
Before install SiS 6326 OS/2 drivers, make sure:
1.  Install your OS/2 system using "VGA display" option (i.e. standard VGA).
2.  Start your OS/2 system.
Install SiS 6326 OS/2 Warp drivers as following procedures:
1.  Enter "OS/2 window" or "OS/2 full screen".
2.  Insert CD into CD-ROM drive.
3.  Change directory to which holds the SiS 6326 OS/2 3.0 display drivers 
    and type
    
    SISINST <Enter>.
    
    For example,
            D:\Si600A\OS2\SBCS.30>SISINST

4.  All the Driver Files will be copied to a subdirectory C:\SISDRV and 
    the "Resolution and Frame Rate Selection" menu appears and 
    all the resolution (and color) and frame rate supported would be shown
    on the screen.
5.  Choose which one you would like to use and click "OK".
6.  Then installation program would complete all installation process and 
    create a "SiS Setup" for future change mode usage.
7.  Shutdown and re-boot OS/2 to make your selection effectively.


**************************************************************
Double Bytes OS/2 Warp
Driver & OS/2 Version Notes
1.  The following description apply to "SiS 6326 Driver Release V1.00" 
    and maybe later release version but not guaranteed.  
2.  The following description apply to "Double Bytes OS/2 Warp" only 
    and especially design for "Full Pack Double Bytes OS/2 Warp".  
    (Full Pack means including Win-OS/2 programs.)  
3.  For other versions OS/2 Warp installation, please refer to "OS/2 V3.0 (Warp)".

Driver Files
1.  The SiS 6326 Double Byte OS/2 3.0 driver files resides on the 
    "\Si600A\OS2\DBCS.30"
2.  The enclosed SiS 6326 Double Byte OS/2 3.0 driver contains the 
    following files:
    
    SETUP.CMD   SiS driver install program
    SVGA.EXE        SiS PMI Generator
    S768256.DL@     SiS IBMDEV32.DLL Display Driver
    OTHERS      other files required during installation

Installation
For Full Pack Double Byte OS/2 Warp limitation, the installation process is 
a two-phase installation and can't complete the whole installation in one-time-process.

1st phase:      copy files, modify "config.sys", create "SiS Install" icon
                then shutdown and re-boot OS/2.
2nd phase:      double clicks "SiS Install" icon to complete the installation

Before install SiS 6326 OS/2 drivers, make sure:
1.  Install your OS/2 system using "VGA display" option (i.e. standard VGA).
2.  Start your OS/2 system.
Install SiS 6326 OS/2 Warp drivers as following procedures:

1st phase:
1.  Enter "OS/2 window" or "OS/2 full screen".
2.  Insert CD into CD-ROM drive.
3.  Change directory to which holds the SiS 6326 OS/2 3.0 display drivers 
    and type
    
    SETUP [drive] <Enter>, (where [drive] is the boot drive character).
    
    For example,
            D:\Si600A\OS2\DBCS.30>SETUP

4.  All the Driver Files will be copied to a subdirectory C:\SISDRV and 
    "SiS Install" icon would be created.
5.  After completing "setup" program, shutdown and re-boot OS/2.

2nd phase:
6.  After re-booting OS/2, double clicks "SiS Install" icon.  
    Then the "SiS Install" icon would be executed automatically and 
    "Resolution and Frame Rate Selection" screen would appeared on the screen.
7.  Select the desired resolution (and color) and frame rate on this screen, 
    then click "OK" to complete installation and "SiS Setup" icon would be 
    created for future change modes and frame rate usage.
8.  After completing installation, shutdown and re-boot OS/2 to make your 
    selection effectively.