1. scsi540.exe Driver
2. INSTALL.TXT File Contents

INSTALL.TXT Driver File Contents (scsi540.exe)

	SIIG SCSI CD-ROM Installer
	==========================

This program will install the SIIG DOS Drivers only.  It is intended 
for people who want to get their CDROM up and running without going
through the entire Windows-based installation of SIIG software and 
utilities.

This program creates an ADVSCSI directory on the C or D drive and
copies the following to it:

	1) SIIG ASPI Manager
	2) SIIG CD-ROM driver and utility
	3) SIIG Hard Drive / Removable Media Manager
	4) SIIG SCSI Info Utility
	5) Text Files describing the above software
	6) This install program

In addition, the install program can modify the config.sys and
autoexec.bat programs automatically to install the ASPI Manager
and CD-ROM driver.  The user has the option of skipping this step
and editing their own autoexec and config.sys.  After initial
configuration, you can reconfigure the CD-ROM driver by typing
ADLINK from while in the ADVSCSI directory.

This DOS based install is intended for systems not running 
Microsoft Windows.  If you have Microsoft Windows, you should 
run the Windows Based setup also included with this package.

Instructions
============

1. From the root directory on you SIIG drivers disk type INSTALL.

2. You will be asked to choose the destination drive.  This is 
   your boot drive and is typically C:

3. A directory called \ADVSCSI will be created on the 
   chosen drive and the SIIG DOS software will be copied to it.

4. You will be asked if it is O.K. to modify your AUTOEXEC.BAT and
   CONFIG.SYS files.  Unless you have a specific reason not to, answer
   yes.  If you have previously installed the SIIG DOS software, 
   you should answer no.

5. If you answered yes, backup copies of AUTOEXEC.BAT and CONFIG.SYS will be
   saved and the changes will be made.

6. If you chose to have AUTOEXEC.BAT and CONFIG.SYS modified 
   automatically, the install program will reboot your system 
   once to configure the CD-ROM software.  After the 
   configuration process, you will need to reboot again for the 
   changes to take effect.

7. If you wish to install Removable and Fixed disk support 
   using ADVDISK, refer to ADVDISK.TXT for installation 
   instructions.

8. For more information on ADVASPI, refer to ADVASPI.TXT.

9. Information about ADVANCD and ADLINK is contained in 
   ADVANCD.TXT.


	Technical Support
	=================

For Further information on using the SIIG software, configuration
program, SIIG Host Adapter or this install program please 
refer to your SIIG SCSI manual or contact SIIG Technical Support.

						csf, 28-3-96