****************************************************************************
* *
* 10/100Mbps Ethernet Card *
* *
* Windows 95 Driver *
* *
* Ver. 3.11 *
* *
* README file *
* *
****************************************************************************
1. Introduction:
This Ethernet NDIS driver supports Microsoft Windows 95 environment.
2. Contents of the Subdirectory:
DC21X4.SYS The driver for Windows 95.
DC21X4.DOS The NDIS2 driver.
NET100D.INF An information file for installing the driver
for Windows 95.
3. Installation:
1) Install your 10/100Mbps Ethernet Card on your PC system following
the procedure described in your installation manual.
2) Power up your PC to start Windows 95.
3) When the "New Hardware Found" panel appears, select "Driver
from disk provided by hardware manufacturer" to install the
Win 95 driver from our Ethernet Driver Disk.
4) When the "Install from Disk" panel appears, insert our Ethernet
Driver Disk to any floppy on your system. Then specify the path
where the driver exists, and select OK.
5) When the driver installation is completed, restart Windows 95.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.