LAN Server 4.0
Introduction:
-------------
This document describes the procedure to install NDIS driver on DOS LAN
Requester and OS/2 LAN server 4.0 for SureCom EP312 Plug&Play Ethernet
Adapter.
Location of Driver: \NDIS\DOS\LAN_4\EP312.DOS (for DOS LAN Services)
\NDIS\OS2\EP312.OS2 (for OS/2 LAN Server )
Installing driver procedure on DOS LAN Requester :
--------------------------------------------------
Before you start with the installation process, make sure that
DOS LAN Services is properly installed. Similarly , your adapter
should also be properly installed in your client PC.
1. Copy EP312.DOS from your Driver diskette (A:\NDIS\DOS\LAN_4) to
DOS LAN Services subdirectory C:\DLS .
2. Under DOS LAN Requester subdirectory C:\DLS, run INSTALL
3. The screen display some description.If it's correct,move highlight
to "The listed options are correct" item ,then press <Enter>.
4. Move highlight to "Network Card", then press <Enter>.
5. Select "Change driver for network card." item, then press <Enter>
6. Select "Network card not shown in list below..",then press <Enter>
7. Insert the SureCom EP312 driver diskette in floppy A, and specify
the pathname A:\NDIS\DOS\LAN_4,then press <Enter>.
8. SureCom-EP312 driver is now installed on your computer , reboot
your computer.
NOTES:
------
Parameters for the PROTOCOL.INI file:
AdapterID : This keyword is provided by EP312, and is required
when more than one EP312 adapters exist on one
system.
Installing driver procedure on OS/2 LAN Server 4.0:
---------------------------------------------------
Before you start with the installation process, make sure that
OS/2 LAN Server is properly installed.Similarly, your adapter should
also be properly installed in your server.
1. In OS/2 window, Click the "MPTS" icon.
2. The screen will display the IBM Log, press "OK".
3. Select "Install" button.
4. Insert the SureCom EP312 driver diskette, specify the driver path
A:\NDIS\OS2 and press <Enter>.
5. When complete above step to load EP312.OS2 into OS/2 system, then
configure your system.
6. The same step as step 3, select "Configure" button.
7. The screen will display "Configure" dialog box and select
"LAN adapters and protocols" then press "configure" button.
8. The screen will display "LAPS Configuration" dialog box, move
highlight to "EP312 Plug and Play" item in "Network Adapter"
window, and select "NetBios" protocol. Press "OK".
9. Installation is complete now. Reset your PC by turning it off
and on.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.