hcw713x.inf Driver File Contents (wintv-hvr-1100_1303_2_24188.zip)

;*****************************************************************************
;
; Copyright 2000 - 2006, Hauppauge Computer Works! Co.
;
;   All rights are reserved. Reproduction in whole or in part is prohibited
;   without the written consent of the copyright owner.
; 
;   Hauppauge reserves the right to make changes without notice at any time.
;   Hauppauge makes no warranty, expressed, implied or statutory, including but
;   not limited to any implied warranty of merchantability or fitness for any
;   particular purpose, or that the use will not infringe any third party
;   patent, copyright or trademark. Hauppauge must not be liable for any loss
;   or damage arising from its use.
;
;  SAA713x Based - BDA TV Capture Driver
;  Supports: 32 bit
;
;*****************************************************************************

[Version]
signature     = "$CHICAGO$" ;All Windows OS
Class         = MEDIA
ClassGUID     = {4d36e96c-e325-11ce-bfc1-08002be10318}
Provider      = %PROVIDER%
CatalogFile.ntx86   = HCW713x.cat

;---------------------mm/dd/yyyy,version--------------------
DriverVer           = 07/07/2006,1.3.2.24188
;                   -> Release
;-----------------------------------------------------------


[Manufacturer]
%PROVIDER%  = SupportedBoards, NTx86

;---> 32 BIT SUPPORT <---
[SupportedBoards.NTx86]
;******** Generic ID's, used for testing purposes only !!! ***
;%Hauppauge_33.DeviceDesc% = Hauppauge_33.NTx86,PCI\VEN_1131&DEV_7133

;******** Mercur, Tiger,... ***
;%Hauppauge_33.DeviceDesc% = Hauppauge_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_20181131

; HAUPPAUGE Subsystem Device ID.
%Hauppauge_33.DeviceDesc% = Hauppauge_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_67010070
%Hauppauge_33_oem.DeviceDesc% = Hauppauge_33_oem.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_67000070

[SupportedBoards]
; HAUPPAUGE Subsystem Device ID.
%Hauppauge_33.DeviceDesc% = Hauppauge_33.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_67010070
%Hauppauge_33_oem.DeviceDesc% = Hauppauge_33_oem.NTx86,PCI\VEN_1131&DEV_7133&SUBSYS_67000070


[SourceDisksNames]
1 = %INSTALLATION_DISK%,,,Driver67


[SourceDisksFiles]
HCW713x.sys           = 1
HCW34Co.dll      = 1
hcwpnp32.dll = 1
hcwutl32.dll = 1
hcwi2c32.dll = 1

[DestinationDirs]
SectionX32.CopyDll.NTx86      = 11
SectionX32.CopyDriver.NTx86   = 10,system32\drivers


[SectionX32.CopyDll.NTx86]
HCW34Co.dll
hcwpnp32.dll
hcwutl32.dll
hcwi2c32.dll


[SectionX32.CopyDriver.NTx86]
HCW713x.sys



;======================================
;
;       Initialization Entries
;
;======================================


;******** SAA7133 x32 ***
[Hauppauge_33.NTx86.CoInstallers]
CopyFiles     = SectionX32.CopyDll.NTx86
AddReg        = SectionX32.DllAddReg.NTx86

[Hauppauge_33.NTx86]
Include       = ks.inf, wdmaudio.inf, kscaptur.inf, bda.inf
Needs         = KS.Registration, WDMAUDIO.Registration.NT, KSCAPTUR.Registration.NT, BDA.Installation.NT
CopyFiles     = SectionX32.CopyDriver.NTx86, SectionX32.CopyDll.NTx86
AddReg        = SectionX32.AddReg.NTx86, Hauppauge_33.AddReg

[Hauppauge_33.NTx86.Services]
AddService    = %SERVICE_NAME_X32%, 0x00000002, SectionX32.ServiceInstall.NTx86


;************** OEM *****
[Hauppauge_33_oem.NTx86.CoInstallers]
CopyFiles     = SectionX32.CopyDll.NTx86
AddReg        = SectionX32.DllAddReg.NTx86

[Hauppauge_33_oem.NTx86]
Include       = ks.inf, wdmaudio.inf, kscaptur.inf, bda.inf
Needs         = KS.Registration, WDMAUDIO.Registration.NT, KSCAPTUR.Registration.NT, BDA.Installation.NT
CopyFiles     = SectionX32.CopyDriver.NTx86, SectionX32.CopyDll.NTx86
AddReg        = SectionX32.AddReg.NTx86, Hauppauge_33_oem.AddReg

[Hauppauge_33_oem.NTx86.Services]
AddService    = %SERVICE_NAME_X32%, 0x00000002, SectionX32.ServiceInstall.NTx86


;******** GENERAL x32 ***
[SectionX32.ServiceInstall.NTx86]
DisplayName   = %DISPLAY_NAME%
Description   = %SERVICE_DESCRIPTION%
ServiceType   = %SERVICE_KERNEL_DRIVER%
StartType     = %SERVICE_DEMAND_START%
ErrorControl  = %SERVICE_ERROR_IGNORE%
ServiceBinary = %12%\HCW713x.sys



;======================================
;
;           Registry Entries
;
;======================================
; [StartName=driver-object-name]
; [AddReg=add-registry-section[, add-registry-section] ...]
; [DelReg=del-registry-section[, del-registry-section] ...]
; [BitReg=bit-registry-section[,bit-registry-section] ...]
; [LoadOrderGroup=load-order-group-name]
; [Dependencies=depend-on-item-name[,depend-on-item-name]...]

;
;******** General DLL Registry Entries ***
;

[SectionX32.DllAddReg.NTx86]
HKR,,CoInstallers32,0x00010000,"HCW34Co.dll, CoInstallerEntry"


;
;******** General Driver Registry Entries ***
;

[SectionX32.AddReg.NTx86]

HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,HCW713x.sys

; --- Registry Entries For Audio Capture ---

HKR,,Driver,,HCW713x.sys
HKR,,AssociatedFilters,,"wdmaud,swmidi,redbook"

HKR,Drivers,SubClasses,,"wave,mixer"
HKR,Drivers\wave\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\mixer\wdmaud.drv,Driver,,wdmaud.drv
HKR,Drivers\wave\wdmaud.drv,Description,,%Hauppauge.AudioDeviceDesc%
HKR,Drivers\mixer\wdmaud.drv,Description,,%Hauppauge.AudioDeviceDesc%

; add audio input and output pinnames
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_IN_PIN%,"Name",,"Analog Audioinput"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_OUT_PIN%,"Name",,"Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_VIDEO_ITU_PIN%,"Name",,"Analog ITU Video"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_ANLG_AUDIO_I2S_PIN%,"Name",,"I2S Audio"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_MPEG_AES_PIN%,"Name",,"MPEG Audio ES"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_MPEG_VES_PIN%,"Name",,"MPEG Video ES"
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%AVSTREAM_MPEG_PS_PIN%,"Name",, "MPEG2 Program"

;; Hauppauge API Support
HKLM,"Software\Hauppauge\HcwTVWnd","VCapFilter",0x00000000,"Hauppauge WinTV-HVR 713x BDA Analog Capture"

;
;******** Board - Specific Registry Entries ***
;

;---- SAA7133 ----
[Hauppauge_33_OEM.AddReg]

; Prefix will be displayed in front of the device name on every filter
HKR, "Parameters","Prefix",,%Hauppauge_CUSTOM_TUNERNAME%

; Reduces second pair of video/audio inputs
HKR, "Parameters","SmallXBar",0x00010001,0x00

; Specify the GPIO pin and polarity for VideoMUX control (Polarity is the MSB)
HKR, "Parameters","VideoMuxGPIO",0x00010001,0x08

; GPIO Audio Configuration 
HKR, "Audio", "I2S Output", 0x00010001,0x00000000 
HKR, "Audio", "I2S2 Output", 0x00010001,0x00000000 

;---- SAA7133 ----
[Hauppauge_33.AddReg]

; Prefix will be displayed in front of the device name on every filter
HKR, "Parameters","Prefix",,%Hauppauge_CUSTOM_TUNERNAME%

; Reduces second pair of video/audio inputs
HKR, "Parameters","SmallXBar",0x00010001,0x00

; Specify the GPIO pin and polarity for VideoMUX control (Polarity is the MSB)
HKR, "Parameters","VideoMuxGPIO",0x00010001,0x08

; GPIO Audio Configuration 
HKR, "Audio", "I2S Output", 0x00010001,0x00000000 
HKR, "Audio", "I2S2 Output", 0x00010001,0x00000000 


;======================================
;
;           Strings Defines
;
;======================================

[Strings]
;-------------------------------
; Capture Filter Pin Name GUIDs
;-------------------------------
AVSTREAM_ANLG_AUDIO_IN_PIN   = "{7BB284B9-714D-493d-A101-B1B028E782BD}"
AVSTREAM_ANLG_AUDIO_OUT_PIN  = "{5582E657-E596-42b5-9DB3-541B27A2355F}"
AVSTREAM_ANLG_VIDEO_ITU_PIN  = "{82631A2E-403C-4581-A4B0-EC173D004410}"
AVSTREAM_ANLG_AUDIO_I2S_PIN  = "{C2E46358-F032-4d88-B802-06B59D162730}"
AVSTREAM_MPEG_AES_PIN        = "{9DEC84B9-BCEF-4aac-997E-43EDD0A2D6C7}"
AVSTREAM_MPEG_VES_PIN        = "{181CF87E-7741-47ba-8629-22347E03C64C}"
AVSTREAM_MPEG_PS_PIN         = "{DDA87B83-65DB-4aec-82D0-79FBE67D2BB6}"


;--------------------
; System Defines
;--------------------
SERVICE_BOOT_START       = 0x0
SERVICE_SYSTEM_START     = 0x1
SERVICE_AUTO_START       = 0x2
SERVICE_DEMAND_START     = 0x3
SERVICE_DISABLED         = 0x4

SERVICE_KERNEL_DRIVER    = 0x1
SERVICE_ERROR_IGNORE     = 0x0
SERVICE_ERROR_NORMAL     = 0x1
SERVICE_ERROR_SEVERE     = 0x2
SERVICE_ERROR_CRITICAL   = 0x3
FLG_REGSVR_DLLREGISTER   = 0x00000001


;------------------------------------------------------------
; Customer Strings
;
; !!! MUST be changed if the driver has been customized, !!!
; !!! to not interfere with the original one.            !!!
;
;------------------------------------------------------------

;--- Service names linked to the driver binary ---
SERVICE_NAME_X32              = "Hauppauge WinTV-HVR"
SERVICE_DESCRIPTION           = "Hauppauge WinTV-HVR 713X BDA Capture Driver"

;--- Name displayed in the device manager ---
DISPLAY_NAME                  = "Hauppauge WinTV-HVR 713X PCI Card"

;--- General names ---
PROVIDER                      = "Hauppauge"
INSTALLATION_DISK             = "Hauppauge WinTV-HVR 713X Driver Installation Disk"


;----------------------------------------------------------
; Board Description
;
; -> Displayed within e.g. Graphedit
;
;----------------------------------------------------------

;*** Specific Names ***
;-----------------
;Hauppauge.AudioDeviceDesc      = "Hauppauge SAA713X Audio Capture Device"
Hauppauge.AudioDeviceDesc       = "Hauppauge WinTV-HVR 713X Audio Capture Device"

Hauppauge_CUSTOM_TUNERNAME      = "Hauppauge WinTV-HVR 713X"
Hauppauge_33.DeviceDesc         = "Hauppauge WinTV-HVR Capture Device (67xx)"
Hauppauge_33_oem.DeviceDesc     = "Hauppauge WinTV-HVR Capture Device (67xx)"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.18