The Intel eeG driver has been tested on SCO OpenServer* version 5.0.7. It is also supported on versions 5.0.5 and 5.0.6. For UNIX support or for updated drivers, please contact the operating system vendor. Instructions for Installing the eeG Driver for SCO OpenServer ============================================================= 1. Copy the eeG.vol file to any directory, say /tmp, on the SCO system, renaming the file as VOL.000.000. Also, make the file read-only by using 'chmod'. For example, # cp eeG.vol /tmp/VOL.000.000 # chmod 444 /tmp/VOL.000.000 2. If there is an older version of the eeG driver on the system, you must first remove it. To do this, run 'netconfig'. Remove all instances of the "Intel PRO/1000..." adapters. Exit netconfig without opting to relink the kernel. Next, run 'custom' and remove the previous "Intel(R) PRO/1000 Network Drivers" version. 3. Install the new driver using 'custom'. When asked for the installation media, choose 'media images', and type the directory path to the VOL.000.000 file. (In step 1, if you copied it to /tmp, type '/tmp'). After the installation of the driver is complete, exit 'custom'. 4. Run 'netconfig' and add the adapters. For each adapter that is present in the system, enter the appropriate TCP/IP parameters. By default, the driver automatically detects the line speed and duplex mode. If you want to force any of these settings, choose 'Advanced Options' and set the speed and duplex modes. Exit 'netconfig' and choose to relink the kernel. 5. Reboot the system. Notes: This driver supports 82544, 82540, 82545, 82546, 82541, and 82547 MAC based devices. Legacy adapters based on the 82542 and 82543 MAC controllers are NOT supported by this driver. If any of these legacy devices, or any other devices are recognized by this driver, it is advised NOT to configure them. * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.