;;========================================================================== ;; ;; zpndis.nti ;; ;; ZX345Q Windows NT NDIS 4.0 Miniport installation script ;; for i386 processors ;; ;;========================================================================== ;; ;; (c) Copyright 1995-1998 ZNYX Corporation ;; All rights reserved. ;; ;;========================================================================== ;; ;; Modification History: ;; See logfile. ;; ;;========================================================================== [Identification] OptionType = NetAdapter [PlatformsSupported] PCI ISA EISA "Jazz-Internal Bus" [Options] ZX345Q [PCIBusChoices] PB0 = 0 PB1 = 1 PB2 = 2 PB3 = 3 PB4 = 4 PB5 = 5 PB6 = 6 PB7 = 7 PB8 = 8 PB9 = 9 PB10 = 10 PB11 = 11 PB12 = 12 PB13 = 13 PB14 = 14 PB15 = 15 PB16 = 16 PB17 = 17 PB18 = 18 PB19 = 19 [PCIDevChoices] PD0 = "AutoDetect",0 PD1 = 1 PD2 = 2 PD3 = 3 PD4 = 4 PD5 = 5 PD6 = 6 PD7 = 7 PD8 = 8 PD9 = 9 PD10 = 10 PD11 = 11 PD12 = 12 PD13 = 13 PD14 = 14 PD15 = 15 PD16 = 16 PD17 = 17 PD18 = 18 PD19 = 19 PD20 = 20 PD21 = 21 PD22 = 22 PD23 = 23 PD24 = 24 PD25 = 25 PD26 = 26 PD27 = 27 PD28 = 28 PD29 = 29 PD30 = 30 PD31 = 31 [TransceiverTypeChoices] MT_0 = "AutoDetect", 0 MT_1 = "10Base-T", 1 MT_4 = "10Base-T FDX", 4 MT_5 = "100Base-TX", 5 MT_6 = "100Base-TX FDX", 6 [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" PciBusList = ^(PCIBusChoices, 1) PciDevList = ^(PCIDevChoices, 1) TransceiverTypeTextList = ^(TransceiverTypeChoices, 1) TransceiverTypeValueList = ^(TransceiverTypeChoices, 2) Manufacturer = "ZNYX" ProductMajorVersion = "4" ProductMinorVersion = "0" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "ZX345Q" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\zx345q.sys" NetRuleSoftwareType = "zx345qSys ndisDriver zx345qDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """zx345qSys"" yes no container" NetRuleSoftwareClass = {"zx345qDriver basic"} NetRuleSoftwareBindable = {"zx345qDriver zx345qAdapter non exclusive 100"} ProductHardwareName = "ZX345Q" NetRuleHardwareType = "zx345q zx345qAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"zx345qAdapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set SrcDir = "" set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ifstr(i) $(SrcDir) == "" Set SrcDir = "A:\" Endif set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif Debug-Output "OEMNADZX.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "OEMNADZX.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure ;; set CommonStatus = STATUS_REBOOT ;; set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the ZX345Q driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE ;; set ActivateDetection = TRUE endif set PciBusValue = *($(PciBusList), 1) set PciDevValue = *($(PciDevList), 1) set TransceiverTypeValue = *($(TransceiverTypeValueList), 1) Debug-Output "OEMNADZX.INF: ==================================================" Debug-Output "OEMNADZX.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "OEMNADZX.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "OEMNADZX.INF: Option is: "$(Option) Debug-Output "OEMNADZX.INF: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "OEMNADZX.INF: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "OEMNADZX.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "OEMNADZX.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "OEMNADZX.INF: ==================================================" Set DetectedCard = FALSE Ifstr(i) $(ActivateDetection) != TRUE Goto skipdetection Endif Set TypeList = {{IRQ,IRQList,IRQValue},+ {IOADDR, IOBaseAddressDecList, IOBaseValue}} Debug-Output "OEMNADZX.INF: Calling Param_BuildTypeLists" Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList) Set Status = $($R0) ifstr(i) $(Status) != STATUS_SUCCESSFUL Goto fataldetect Endif Debug-Output "OEMNADZX.INF: Calling Param_SetDefaults" Shell $(ParamInf) Param_SetDefaults {} Shell $(ParamInf) HexListFromDecList $(IOBaseAddressDecList) Set IOBaseAddressList = $($R0) Shell $(UtilityInf) SortList $(IRQList) TRUE FALSE Set IRQList = $($R0) Ifstr(i) $(!STF_NCDETECT) == YES Ifstr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE Debug-Output "OEMNADZX.INF: Setting DetectedCard to TRUE" Endif Endif skipdetection =+ set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + Debug-Output "OEMNADZX.INF: installadapter" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif ; ; Install "Install-Helpfile" ifint $(OldVersionExisted) == $(FALSE) install "Install-Helpfile" endif SetHelpFile "ZX345Q.hlp" 1 1 Ifstr(i) $(DetectedCard) != TRUE Goto adaptersetup Endif StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adaptersetup Endif Set DetectedParams = $($R1) Debug-Output "OEMNADZX.INF: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto adapteroptions configureadapter = + SetHelpFile "ZX345Q.hlp" 1 1 Debug-Output "OEMNADZX.INF: configureadapter" Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "AdapterId" set AdapterIdValue = $(ValueData) else-ifstr(i) $(ValueName) == "PciBusNumber" set PciBusValue = $(ValueData) else-ifstr(i) $(ValueName) == "PciDeviceNumber" set PciDevValue = $(ValueData) else-Ifstr(i) $(ValueName) == "ChannelNumber" set ChannelNumberValue = $(ValueData) else-Ifstr(i) $(ValueName) == "TransceiverType" set TransceiverTypeValue = $(ValueData) else-Ifstr(i) $(ValueName) == "Pbl" set PblValue = $(ValueData) else-Ifstr(i) $(ValueName) == "Cal" set CalValue = $(ValueData) else-Ifstr(i) $(ValueName) == "Lat" set LatValue = $(ValueData) else-Ifstr(i) $(ValueName) == "MapRegisters" set MapRegistersValue = $(ValueData) else-Ifstr(i) $(ValueName) == "RxPackets" set RxPacketsValue = $(ValueData) else-Ifstr(i) $(ValueName) == "RxBuffers" set RxBuffersValue = $(ValueData) else-Ifstr(i) $(ValueName) == "TxBuffers" set TxBuffersValue = $(ValueData) else-Ifstr(i) $(ValueName) == "TxBufferThreshold" set TxBufferThresholdValue = $(ValueData) else-Ifstr(i) $(ValueName) == "TxDescriptors" set TxDescriptorsValue = $(ValueData) else-Ifstr(i) $(ValueName) == "InterruptMap" set InterruptMapValue = $(ValueData) else-Ifstr(i) $(ValueName) == "InternalPciFunc" set InternalPciFuncValue = $(ValueData) else-Ifstr(i) $(ValueName) == "InterfaceType" set InterfaceTypeValue = $(ValueData) else-Ifstr(i) $(ValueName) == "MediaType" set MediaTypeValue = $(ValueData) endif EndForListDo ifstr(i) $(TransceiverTypeValue) == "" set TransceiverTypeValue = *($(TransceiverTypeValueList), 1) endif ifstr(i) $(PciBusValue) == "" set PciBusValue = *($(PciBusList), 1) endif ifstr(i) $(PciDevValue) == "" set PciDevValue = *($(PciDevList), 1) endif ifstr(i) $(ChannelNumberValue) == "" set ChannelNumberValue = 1 endif adaptersetup =+ Debug-Output "OEMNADZX.INF: adaptersetup" ; Shell $(ParamInf) Param_ParameterConfidence ; Ifstr(i) $($R0) != STATUS_SUCCESSFUL ; Debug-Output "OEMNADZX.INF: parameter confidence too low to bypass configuration" ; Goto adapteroptions ; Endif ; Ifstr(i) $(DetectedCard) == TRUE ; Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM ; Goto adapterverify ; Endif ; Endif ; goto adapteroptions adapteroptions = + Debug-Output "OEMNADZX.INF: adapteroptions" set from = adapteroptions set TransceiverTypeString = *($(TransceiverTypeTextList), ~($(TransceiverTypeValueList),+ $(TransceiverTypeValue))) read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set PciBusValue = $(Combo1Out) set PciDevValue = $(Combo2Out) set TransceiverTypeString = $(Combo3Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif set TransceiverTypeValue = *($(TransceiverTypeValueList), ~($(TransceiverTypeTextList),+ $(TransceiverTypeString))) adapterverify =+ Ifstr(i) $(DetectedCard) != TRUE Goto skipoptions Endif Debug-Output "OEMNADZX.INF: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "OEMNADZX.INF: Param_VerifyCard succeeded" Goto skipoptions Endif Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + ;### ; Shell $(UtilityInf), GetBusTypeNum ; set BusTypeNum = $($R1) ; ifint $($ShellCode) != $(!SHELL_CODE_OK) ; Debug-Output "ShellCode error." ; goto ShellCodeError ; endif ;### set BusTypeNum = 5 set BusNum = 0 set HppeClr = 0 ifstr(i) $(AdapterIdValue) == "" set AdapterIdValue = 4608 endif ifstr(i) $(PblValue) == "" set PblValue = 16 endif ifstr(i) $(CalValue) == "" set CalValue = 16 endif ifstr(i) $(LatValue) == "" set LatValue = 240 endif ifstr(i) $(MapRegistersValue) == "" set MapRegistersValue = 16 endif ifstr(i) $(RxPacketsValue) == "" set RxPacketsValue = 8 endif ifstr(i) $(RxBuffersValue) == "" set RxBuffersValue = 20 endif ifstr(i) $(TxBuffersValue) == "" set TxBuffersValue = 8 endif ifstr(i) $(TxBufferThresholdValue) == "" set TxBufferThresholdValue = 1 endif ifstr(i) $(TxDescriptorsValue) == "" set TxDescriptorsValue = 32 endif ifstr(i) $(InterruptMapValue) == "" set InterruptMapValue = 0 endif ifstr(i) $(InternalPciFuncValue) == "" set InternalPciFuncValue = 1 endif ifstr(i) $(InterfaceTypeValue) == "" set InterfaceTypeValue = 5 endif ifstr(i) $(MediaTypeValue) == "" set MediaTypeValue = 1 endif set NewValueList = {+ {AdapterId,$(NoTitle),$(!REG_VT_DWORD),$(AdapterIdValue)},+ {PciBusNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciBusValue)},+ {PciDeviceNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciDevValue)},+ {TransceiverType,$(NoTitle),$(!REG_VT_DWORD),$(TransceiverTypeValue)},+ {ChannelNumber,$(NoTitle),$(!REG_VT_DWORD),$(ChannelNumberValue)},+ {Pbl,$(NoTitle),$(!REG_VT_DWORD),$(PblValue)},+ {Cal,$(NoTitle),$(!REG_VT_DWORD),$(CalValue)},+ {Lat,$(NoTitle),$(!REG_VT_DWORD),$(LatValue)},+ {MapRegisters,$(NoTitle),$(!REG_VT_DWORD),$(MapRegistersValue)},+ {RxPackets,$(NoTitle),$(!REG_VT_DWORD),$(RxPacketsValue)},+ {RxBuffers,$(NoTitle),$(!REG_VT_DWORD),$(RxBuffersValue)},+ {TxBuffers,$(NoTitle),$(!REG_VT_DWORD),$(TxBuffersValue)},+ {TxBufferThreshold,$(NoTitle),$(!REG_VT_DWORD),$(TxBufferThresholdValue)},+ {TxDescriptors,$(NoTitle),$(!REG_VT_DWORD),$(TxDescriptorsValue)},+ {InterruptMap,$(NoTitle),$(!REG_VT_DWORD),$(InterruptMapValue)},+ {InternalPciFunc,$(NoTitle),$(!REG_VT_DWORD),$(InternalPciFuncValue)},+ {InterfaceType,$(NoTitle),$(!REG_VT_DWORD),$(InterfaceTypeValue)},+ {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(InterfaceTypeValue)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaTypeValue)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciBusValue)},+ {HppeClr,$(NoTitle),$(!REG_VT_DWORD),$(HppeClr)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)}+ } Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set !UG_Filename = $($R0) ifstr(i) $(!UG_Filename) != "" install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} ifint $(Version) != $(ProductVersion) endif CloseRegKey $(KeyProduct) else goto fatalregistry endif else OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey Ifstr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey Ifstr(i) $(NetRuleKey) != $(KeyNull) else goto fatalregistry endif CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) else goto fatalregistry endif OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey Ifstr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) else goto fatalregistry endif endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) ;; AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Helpfile] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "ZNYX NetBlaster ZX345Q Driver Diskette", TAGFILE = oemsetnt.inf [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = i386 [Files-Inf] 1, oemsetnt.inf, SIZE=32000, RENAME=$(!UG_Filename) [Files-ZX345Q] 1, ZX345Q.SYS, SIZE=36864 [Files-Dll] 1, Z45NCDET.DLL, SIZE=9999 [Files-Hlp] 1, ZX345Q.hlp , SIZE=8888 [LanguagesSupported] ENG [OptionsTextENG] ZX345Q = "ZNYX NetBlaster ZX345Q NDIS 4 (for Intel Processors)" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "ZNYX NetBlaster ZX345Q Fast Ethernet adapter Setup" ProductSoftwareDescription = "ZNYX ZX345Q NDIS 4 Adapter Driver (Intel)" ProductHardwareZX345QDescription = "ZNYX ZX345Q Adapter" ProductSoftwareTitle = "ZNYX ZX345Q NDIS 4 Adapter Driver (Intel)" ProductHardwareZX345QTitle = "ZNYX ZX345Q Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Combo1Label = "PCI &Bus Number:" Combo2Label = "PCI &Device Number:" Combo3Label = "&Media Type:" DlgType = "MultiCombo" DlgTemplate = "WD" Caption = $(FunctionTitle) Combo1List = $(PciBusList) Combo1Out = $(PciBusValue) Combo2List = $(PciDevList) Combo2Out = $(PciDevValue) Combo3List = $(TransceiverTypeTextList) Combo3Out = $(TransceiverTypeString) ComboListItemsIn = {Combo1List, Combo2List, Combo3List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} NotifyFields = {NO, NO, NO} HelpContext = 1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.