1. Win95-ZP.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (Win95-ZP.exe)

README.TXT FILE  FOR


MIRAGE Z-128 Win 95 Display Driver for Z-128 /Z-128 Pro
ET6000/ET6100 chip (C) Copyright 1997. Tseng Labs, Inc.
(C) Copyright 1998. MIRAGE MULTIMEDIA SYSTEMS INC.



DRIVER INFORMATION

                Driver Name:           Tseng Labs Windows 95 Display Driver for ET6000/ET6100 chip
                Driver Date:           11/6/97
                Driver Release:        8 
                Driver Version:        4.10.01.0064
                Driver Disk Contents:
	                                        TLIET600.DRV	(GDI MiniDriver 32-bit High Performance)
	                                        TLIET60S.DRV	(GDI MiniDriver 16-bit Safe Compatible)
                                                TLIET600.DLL	(DirectDraw Driver)
                                                TLIET600.VXD	(Virtual Display MiniDriver)
                                                TLIET600.INF	(Win 95 Driver Installation File)
                                                DISKT		(Install Disk Marker File)
                                                README.TXT	(This file you are reading)
                                                RELEASE.TXT	(Specific Driver information for the current  release)



 *NOTE:   There are now 2 versions of the GDI Mini Driver, a 16-bit entry version for safety and 
          compatibility and a 32-bit entry for higher performance.
          
          By design, Windows 95 GDI mini drivers are supposed to be entirely 16-bit  
          compatible with Win 3.X applciations.  Although GDI Mini drivers can be built 
          using 32-bit code segments and can be run faster on Pentium and Pentium-II 
          processors.  32-bit drivers are 100% compatible win applications that use
          GDI correctly.  Applications that bypass GDI or alter the display driver code 
          in anyway will have problems.
          
          The 16-bit GDI mini-driver should be selected and used if you are using applications
          that overwrite the display driver's code segment with their own unique optimiziations.
          Applications that are currently known to do this are:
          
             * Apple Quicktime (all versions if in QTW.INI Optimize=hardware or driver)
             * Adobe Premiere 4.X 
             * ReachOut
             * Microsoft SMS
             * CoSession


SYSTEM REQUIREMENTS

	Operating System:   Windows 95 builds (950 , OSR2, OSR2.1) and Win 98 Beta's
	Tseng Graphics chip support:  ET6000/ET6100


DRIVER INSTALLATION PROCEDURE


I. Installing from Hardware Auto-Detect, Hardware 
    Installation Wizard, or Display Property Settings
    Page.

  1. Open "Control Panel"
  2. Open "Display"
  3. Choose the "Settings" Tab
  4. Select "Change Display Type"
  5. In the "Adapter Type" section select "Change"
  6. Select "Have Disk"
  7. Browse to directory where WIN 95 driver files are located
	Insert MIRAGE disk#2 in floppy a: and type:
	a:\win95
  8. Select "tsenget6.inf" and click "OK"
  9. In the "Select Device" window select "OK"
 10. In the "Change Display Type" window select "Close"
 11. Select "Apply" or "Close" and Restart



NOTES

* For Specific Driver information, please read the 
  "release.txt" file on this driver distribution.
 
* This driver is compatible with ALL versions of Windows 95.
  It is also compatible with DirectX versions 2,3, 3a and 5.
  DirectX 1.0 is no longer supported in this driver!
  Please make sure that you have installed DirectX runtimes
  2, 3, 3a and 5 from Microsoft to ensure compatibility.

* DirectX setup programs don't necessarily install the
  DirectVideo Dynamic Link Library (DLL) for 
  acceleration of programs which use the Video for 
  Windows(VFW) application interface.  If you want 
  support for Video for Windows playback you should 
  install the DirectVideo/DirectX 3.0 setup package 
  available on Tseng Labs Web Page:
  
   http://www.tseng.com/frames/download/directxv.exe



PROCEDURE TO CHANGE FROM THIS DRIVER BACK TO THE  MICROSOFT VGA DRIVER

 1. Open "Control Panel"
 2. Open "Display"
 3. Choose the "Settings" tab
 4. Select "Change Display Type"
 5. In the "Adapter Type" section select "Change"
 6. Select "Show all devices"
 7. Under "Manufacturers:" highlight "(Standard Display Types)"
 8. Under "Models:" highlight "Super VGA"
 9. In the "Select Device" window select "OK"
10. In the "Change Display Type" window select "Close"
11. Select "Apply" or "Close" and restart


NOTES

MIRAGE "monitor" and "adjust" programs will adjust all Win 95 modes
and resolutions. Please make sure that "monitor.exe" is loaded once
at the power up (in autoexec.bat).
You can make further changes by running "adjust" program in a DOS window.
Monitor.exe must have been loaded first in the autoexec.bat file, not in
that DOS session only.

About WINDOWS 95 OEM release 2:

This version of WINDOWS supports refresh rate support for each given
resolution. Please use "Default refresh rate" if you had any problem
with "optimal" refresh rate setting under Advanced selections.


About Anyview ET6000 WIN95 DRIVERS:

This driver supports on the fly resolution and color depth changes
and supports virtual screen support (e.g. You can view a 1024x768 viewable
are from a background of up to 2048x2048 ).

This driver is released as is and we do not offer any technical support for it.
To download this driver, please  refer to our web FTP:

ftp://mirage-mmc.com/pub/mirage/Z-128