;;==========================================================================
;;
;; zpndis.nti
;;
;; ZX348Q Windows NT NDIS 4.0 Miniport installation script
;; for i386 processors
;;
;;==========================================================================
;;
;; (c) Copyright 1995-1998 ZNYX Corporation
;; All rights reserved.
;;
;;==========================================================================
;;
;; Modification History:
;; See logfile.
;;
;;==========================================================================
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
ZX348Q
[PCIBusChoices]
PB1 = 1
PB2 = 2
PB3 = 3
PB4 = 4
PB5 = 5
PB6 = 6
PB7 = 7
PB8 = 8
PB9 = 9
PB10 = 10
PB11 = 11
PB12 = 12
PB13 = 13
PB14 = 14
PB15 = 15
PB16 = 16
PB17 = 17
PB18 = 18
PB19 = 19
[ChannelNumberChoices]
PD0 = "AutoDetect",0
PD1 = 1
PD2 = 2
[TransceiverTypeChoices]
MT_0 = "AutoDetect", 0
MT_1 = "10Base-T", 1
MT_4 = "10Base-T FDX", 4
MT_5 = "100Base-TX", 5
MT_6 = "100Base-TX FDX", 6
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
PciBusList = ^(PCIBusChoices, 1)
ChannelNumberList = ^(ChannelNumberChoices, 1)
TransceiverTypeTextList = ^(TransceiverTypeChoices, 1)
TransceiverTypeValueList = ^(TransceiverTypeChoices, 2)
Manufacturer = "ZNYX"
ProductMajorVersion = "4"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "ZX348Q"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\zx348q.sys"
NetRuleSoftwareType = "zx348qSys ndisDriver zx348qDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """zx348qSys"" yes no container"
NetRuleSoftwareClass = {"zx348qDriver basic"}
NetRuleSoftwareBindable = {"zx348qDriver zx348qAdapter non exclusive 100"}
ProductHardwareName = "ZX348Q"
NetRuleHardwareType = "zx348q zx348qAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"zx348qAdapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
Ifstr(i) $($1) == ""
goto returnoptions
Endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
Endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
Endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
;; set !G:DebugOutputControl = 1
set SrcDir = ""
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Ifstr(i) $(SrcDir) == ""
set SrcDir = "A:\"
Endif
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
Endif
Debug-Output "OEMNADZX.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMNADZX.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
Ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
Endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set DetectedCard = FALSE
set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the ZX348Q driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
Endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
Endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
set ActivateDetection = TRUE
Endif
set PciBusValue = *($(PciBusList), 1)
set PciDevValue = 4
set ChannelNumberValue = *($(ChannelNumberList), 1)
set TransceiverTypeValue = *($(TransceiverTypeValueList), 1)
Debug-Output "OEMNADZX.INF: =============================================="
Debug-Output "OEMNADZX.INF: STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "OEMNADZX.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "OEMNADZX.INF: Option is: "$(Option)
Debug-Output "OEMNADZX.INF: !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "OEMNADZX.INF: !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "OEMNADZX.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "OEMNADZX.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "OEMNADZX.INF: =============================================="
Ifstr(i) $(ActivateDetection) != TRUE
Goto skipdetection
Endif
set BusLowerBound = 1
set SlotLowerBound = 4
set SlotUpperBound = 5
set Vendor = 4113
set CFID = 25
set-sub AdapterSlots = $(SlotUpperBound), $(SlotLowerBound)
set-add AdapterSlots = $(AdapterSlots), 1
Debug-Output "GetPCIInfo: "$(Vendor)
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
Ifstr(i) $($R0) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = STATUS_USERCANCEL
set from = end
goto nonfatal
Endif
set AdapterList = $($R0)
set NewAdapterList = {}
set TmpAdapterList = {}
set CurrBus = $(BusLowerBound)
set CurrNum = 0
Debug-Output "AdapterList: "$(AdapterList)
ForListDo $(AdapterList)
set BusNum = *($($),1)
set SlotNum = *($($),2)
set ListElem = $($)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
Ifstr(i) $($R1) == "YES"
goto continueAdapterList
Endif
Ifint $(BusNum) != $(CurrBus)
set CurrBus = $(BusNum)
Ifint $(CurrNum) == $(AdapterSlots)
Ifstr(i) $(NewAdapterList) == {}
set NewAdapterList = $(TmpAdapterList)
else
ForListDo $(TmpAdapterList)
set NewAdapterList = >($(NewAdapterList), $($))
EndForListDo
Endif
Endif
Debug-Output "NewAdapterList: "$(NewAdapterList)
set CurrNum = 0
set TmpAdapterList = {}
Endif
Ifint $(SlotNum) >= $(SlotLowerBound)
Ifint $(SlotNum) <= $(SlotUpperBound)
set-add CurrNum = $(CurrNum), 1
Ifstr(i) $(TmpAdapterList) == {}
set TmpAdapterList = {$(ListElem)}
else
set TmpAdapterList = >($(TmpAdapterList), $(ListElem))
Endif
goto continueTmpAdapterList
Endif
Endif
continueAdapterList = +
set CurrNum = 0
set TmpAdapterList = {}
continueTmpAdapterList = +
EndForListDo
Ifint $(CurrNum) == $(AdapterSlots)
Ifstr(i) $(NewAdapterList) == {}
set NewAdapterList = $(TmpAdapterList)
else
ForListDo $(TmpAdapterList)
set NewAdapterList = >($(NewAdapterList), $($))
EndForListDo
Endif
Debug-Output "NewAdapterList: "$(NewAdapterList)
Endif
Ifstr(i) $(NewAdapterList) == {}
set Error = $(CANNOT_FIND_NEW_CARD)
set CommonStatus = STATUS_USERCANCEL
set from = end
goto nonfatal
Endif
set AdapterList = $(NewAdapterList)
set DetectedCard = TRUE
skipdetection = +
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Debug-Output "OEMNADZX.INF: installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
Ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell error: VerExistDlg."
goto ShellCodeError
Endif
goto end
Endif
Shell $(UtilityInf), CardExistedDlg
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell error: CardExistDlg."
goto ShellCodeError
Endif
Ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
Endif
set OldVersionExisted = $(TRUE)
Endif
Ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
Goto fatal
Endif
Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
set SrcDir = $($R1)
Endif
install "Install-Helpfile"
Endif
SetHelpFile "ZX348Q.hlp" 1 1
Ifstr(i) $(DetectedCard) == TRUE
Goto installproduct
Endif
goto adapteroptions
configureadapter = +
SetHelpFile "ZX348Q.hlp" 1 1
Debug-Output "OEMNADZX.INF: configureadapter"
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
Endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
Endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "AdapterId"
set AdapterIdValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "PciBusNumber"
set PciBusValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "PciDeviceNumber"
set PciDevValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "ChannelNumber"
set ChannelNumberValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "TransceiverType"
set TransceiverTypeValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "Pbl"
set PblValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "Cal"
set CalValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "Lat"
set LatValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "MapRegisters"
set MapRegistersValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "RxPackets"
set RxPacketsValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "RxBuffers"
set RxBuffersValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "TxBuffers"
set TxBuffersValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "TxBufferThreshold"
set TxBufferThresholdValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "TxDescriptors"
set TxDescriptorsValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "InterruptMap"
set InterruptMapValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "InternalPciFunc"
set InternalPciFuncValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "InterfaceType"
set InterfaceTypeValue = $(ValueData)
else-Ifstr(i) $(ValueName) == "MediaType"
set MediaTypeValue = $(ValueData)
Endif
EndForListDo
Ifstr(i) $(TransceiverTypeValue) == ""
set TransceiverTypeValue = *($(TransceiverTypeValueList), 1)
Endif
Ifstr(i) $(PciBusValue) == ""
set PciBusValue = *($(PciBusList), 1)
Endif
Ifstr(i) $(PciDevValue) == ""
set PciDevValue = 4
Endif
Ifstr(i) $(ChannelNumberValue) == ""
set ChannelNumberValue = 1
Endif
adapteroptions = +
Debug-Output "OEMNADZX.INF: adapteroptions"
set from = adapteroptions
set TransceiverTypeString = *($(TransceiverTypeTextList), ~($(TransceiverTypeValueList), $(TransceiverTypeValue)))
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg"
Ifstr(i) $(DLGEVENT) == "CONTINUE"
set TransceiverTypeString = $(Combo1Out)
ui pop 1
else-Ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
Endif
set TransceiverTypeValue = *($(TransceiverTypeValueList), ~($(TransceiverTypeTextList), $(TransceiverTypeString)))
Ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
Endif
installproduct = +
StartWait
Ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
Goto fatal
Endif
Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
set SrcDir = $($R1)
Endif
install "Install-Option"
Ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
goto fatal
Endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
set OEM_ABANDON_SOFTWARE = TRUE
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
Endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: AddValueList."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
Endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: AddValueList."
goto fatalregistry
Endif
Endif
Debug-Output "AdapterList: "$(AdapterList)
ForListDo $(AdapterList)
set PciBusNumber = *($($),1)
set PciDeviceNum = *($($),2)
set-sub PciChannelNum = $(PciDeviceNum), $(SlotLowerBound)
set-add PciChannelNum = $(PciChannelNum), 1
set FunctionNum = *($($),3)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
Endif
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell error: AddHardwareComponent"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: AddHardwareComponent"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
Endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell error: AddValueList"
goto ShellCodeError
Endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell error: AddValueList"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: AddValueList"
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
Endif
CloseRegKey $(KeyAdapterRules)
set BusTypeNum = 5
set HppeClr = 0
Ifstr(i) $(AdapterIdValue) == ""
set AdapterIdValue = 5120
Endif
Ifstr(i) $(PblValue) == ""
set PblValue = 16
Endif
Ifstr(i) $(CalValue) == ""
set CalValue = 16
Endif
Ifstr(i) $(LatValue) == ""
set LatValue = 240
Endif
Ifstr(i) $(MapRegistersValue) == ""
set MapRegistersValue = 16
Endif
Ifstr(i) $(RxPacketsValue) == ""
set RxPacketsValue = 8
Endif
Ifstr(i) $(RxBuffersValue) == ""
set RxBuffersValue = 20
Endif
Ifstr(i) $(TxBuffersValue) == ""
set TxBuffersValue = 8
Endif
Ifstr(i) $(TxBufferThresholdValue) == ""
set TxBufferThresholdValue = 1
Endif
Ifstr(i) $(TxDescriptorsValue) == ""
set TxDescriptorsValue = 32
Endif
Ifstr(i) $(InterruptMapValue) == ""
set InterruptMapValue = 0
Endif
Ifstr(i) $(InternalPciFuncValue) == ""
set InternalPciFuncValue = 1
Endif
Ifstr(i) $(InterfaceTypeValue) == ""
set InterfaceTypeValue = 5
Endif
Ifstr(i) $(MediaTypeValue) == ""
set MediaTypeValue = 1
Endif
set NewValueList = {+
{AdapterId,$(NoTitle),$(!REG_VT_DWORD),$(AdapterIdValue)},+
{PciBusNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciBusNumber)},+
{PciDeviceNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciDevValue)},+
{TransceiverType,$(NoTitle),$(!REG_VT_DWORD),$(TransceiverTypeValue)},+
{ChannelNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciChannelNum)},+
{Pbl,$(NoTitle),$(!REG_VT_DWORD),$(PblValue)},+
{Cal,$(NoTitle),$(!REG_VT_DWORD),$(CalValue)},+
{Lat,$(NoTitle),$(!REG_VT_DWORD),$(LatValue)},+
{MapRegisters,$(NoTitle),$(!REG_VT_DWORD),$(MapRegistersValue)},+
{RxPackets,$(NoTitle),$(!REG_VT_DWORD),$(RxPacketsValue)},+
{RxBuffers,$(NoTitle),$(!REG_VT_DWORD),$(RxBuffersValue)},+
{TxBuffers,$(NoTitle),$(!REG_VT_DWORD),$(TxBuffersValue)},+
{TxBufferThreshold,$(NoTitle),$(!REG_VT_DWORD),$(TxBufferThresholdValue)},+
{TxDescriptors,$(NoTitle),$(!REG_VT_DWORD),$(TxDescriptorsValue)},+
{InterruptMap,$(NoTitle),$(!REG_VT_DWORD),$(InterruptMapValue)},+
{InternalPciFunc,$(NoTitle),$(!REG_VT_DWORD),$(InternalPciFuncValue)},+
{InterfaceType,$(NoTitle),$(!REG_VT_DWORD),$(InterfaceTypeValue)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(InterfaceTypeValue)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(MediaTypeValue)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(PciBusNumber)},+
{HppeClr,$(NoTitle),$(!REG_VT_DWORD),$(HppeClr)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)}+
}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Shell error: AddValueList"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: AddValueList"
goto fatalregistry
Endif
EndForListDo
EndWait
goto successful
updateparameters = +
set NewValueList = {{TransceiverType,$(NoTitle),$(!REG_VT_DWORD),$(TransceiverTypeValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter = +
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), $(ProductSoftwareName)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
Endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), $(ProductSoftwareName), $(!NTN_RegBase)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
Endif
Endif
goto end
UpgradeSoftware = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
Endif
set !UG_Filename = $($R0)
Ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
Ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
Endif
Endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
Ifint $(Version) != $(ProductVersion)
Endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
Endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
else
goto fatalregistry
Endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
Endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
Endif
Endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
Endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
Endif
Endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
Ifstr(i) $($R1) == "OK"
goto $(to)
else-Ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
Endif
nonfatalinfo = +
set CommonStatus = STATUS_USERCANCEL
set Severity = STATUS
goto nonfatalmsg
nonfatal = +
set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
Ifstr(i) $(Error) == ""
set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
Endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
Ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
Endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
Endif
set Error = $($R0)
Goto fatal
fatal = +
Ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
Endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
Ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
Endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
Ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
Endif
Ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Endif
Ifstr(i) $(DoConfig) == "YES"
Endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Helpfile]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "ZNYX NetBlaster ZX348Q Driver Diskette", TAGFILE = oemsetnt.inf
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = i386
[Files-Inf]
1, oemsetnt.inf, SIZE=32000, RENAME=$(!UG_Filename)
[Files-ZX348Q]
1, ZX348Q.SYS, SIZE=36864
[Files-Hlp]
1, ZX348Q.hlp , SIZE=8888
[LanguagesSupported]
ENG
[OptionsTextENG]
ZX348Q = "ZNYX NetBlaster ZX348Q NDIS 4 (for Intel Processors)"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "ZNYX NetBlaster ZX348Q 4/100 Mbps adapter Setup"
ProductSoftwareDescription = "ZNYX ZX348Q NDIS 4 Adapter Driver (Intel)"
ProductHardwareZX348QDescription = "ZNYX ZX348Q Adapter"
ProductSoftwareTitle = "ZNYX ZX348Q NDIS 4 Adapter Driver (Intel)"
ProductHardwareZX348QTitle = "ZNYX ZX348Q Adapter"
ShellCodeErrorTitle = "Error: "$(FunctionTitle)
ShellCodeErrorText = "Shell Code Error."
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
DlgText = "Choose the proper connection type for the "+
"network adapter. Select [Help] for a detailed "+
"description of the available options."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(FunctionTitle)
Combo1Label = "&Media Type:"
Combo1List = $(TransceiverTypeTextList)
Combo1Out = $(TransceiverTypeString)
ComboListItemsIn = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = 1
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.