OEMDS.INI Driver File Contents (R146828.EXE)

; This section controls debug output. Allowed values are:
;  0 - no output
;  1 - output to debug window (for DEBUG version only)
;  2 - output to LOG file (for both RELEASE and DEBUG versions)
[Debug]
IOManager=0	; Device enumeration and command execution
IOSTI=0		; STI IO details
IOUSB=0		; USB IO details
IOLPT=0		; LPT IO details
IOVECP=0	; VECP IO details
GUI=0		; Graphical User Interface
BMP=0		; BMP file for native transfer
OPT=0		; TWAIN capabilities
LLH=0		; Load Library helper
CliDataDump=0	; SSIP commands and responses in text form
DataProvider=0	; Data provider
Device=0	; Command sequence, warming, fake responses, etc.
DS=0		; High level of TWAIN protocol parser, shared objects lifetime control
Handlers=0	; Middle level of TWAIN protocol parser
INIFileReader=0	; Read-only parameters storage
TransferManager=0	; Data exchange with device, best use - together with CliDataDumps
CapabilityHandler=0	; Low-level TWAIN, conversion of TWAIN, UI and MFP data formats
Identity=0	; TWAIN identity and commands sent from DS to DSM
UserInterface=0	; User interface window messages, commands and callbacks
ImageProcessor=0; Image conversion during TWAIN transfer
PaddingFilter=0	; empty space in the end of the line and the block
Pointer=0	; conversion between TW_HANDLE and pointer
FilePath=0	; handling path for use in File Transfer
PaletteHandler=0; handling TWAIN 8-bit color palette 
ImageProcessing=0	; image processing module

[Model] ; Identification of the Data Source and the supported MFP model
Manufacturer=Dell			; Helper DS Identity string
ProductFamily=Dell Laser MFP		; Helper DS Identity string
ProductName=Dell Laser MFP 1600n		; Main DS Identity string
PnP=1600n				; Plug-n-Play string
VID=0x413c                              ; VID
PID=0x5220                             ; PID

[Command] 	; Details of SSIP implementation
ObjectPosition=1; Whether ObjectPosition is supported (0 if not)
DeviceSelect=4  ; Value of device selection for Device Monitor

[Resolution] ; Resolutions supported by DS and the factory default
Enum=75,100,150,200,300,600,1200,2400,4800	; UI range
Default=300						; UI default

[ColorMode] ; Image composition modes supported by DS and the factory default
Enum=LineArt,Halftone,Grayscale,ColorRGB,Color256	; UI range
Default=ColorRGB					; UI default

[ADF]		; Automatic Data Feeder paper source properties
XMax=10200	; Scan area width in basic units
YMax=16800	; Scan area length in basic units
XMin=5400	; Minimal paper holder width in basic units
YMin=8400	; Minimal paper holder length in basic units

[Flatbed]	; Flatbed paper source properties
XMax=10200	; Glass width in basic units
YMax=14040	; Glass length in basic units

[Selection] 	; Smallest scan area that user may select
XMin=128	; Width in basic units
YMin=128	; Length in basic units

[Timeouts]
CheckBlockInterval=100		; Sleep interval between check block attempts
CheckBlockTimeout=60000		; Common timeout for all check block attempts
CommandInterval=2000		; Sleep interval between command executions
CommandTimeout=60000		; Common timeout for all command executions
ReadCommandTimeout=5000         ; Read command timeout for asynchronous reading
WriteCommandTimeout=5000        ; Read command timeout for asynchronous writing
PauseAfterAcquire=100           ; Timeout after acquire
PauseAfterSetParameters=100     ; Timeout after Set Parameters
PauseAfterPosition=300          ; Timeout after Position
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.85