EnMixCPL.ini Driver File Contents (envy24_family_drivers20061027sdv510beta1027.zip)

*******************************************************************************
* [Default]
*    Title    		         //    CPL Title
*
*    Hint     		         //    Tray Icon Hint 
*
*    SR_Limited                  //    0: No Limitation 
*                                //    1:48KHz  
*                                //    2:96kHz
*
*    SPDIFIN_Connector_Select=   //    0: Default  1:Support S/PDIF In connector option. 2:Disable 
*
* [DynamicSetting]
*    Is_first_boot               //    First installation flag.
*                                //    1:First 0:Otherwise.
*    SQ_Is_Enable                //    QSound enable value.Default is 0.
*                                //    1:Enable 0:Disable.
*    CPL_SPDIFIN_wMonitorDevice= //    0:No Item Selected.
*                                //    256:No S/PDIF
*                                //    512:Loop Back S/PDIF In to Front Speaker
*                                //    1024:Loop Back S/PDIF In to 7/8 ch Speaker
*    			         //    2048:Loop Back S/PDIF In to S/PDIF Out	
*
*    CPL_SPDIFIN_SpdifInSwitch=  //    32768:OPtical
*                                //    16384:Coaxial
*
*    PerformanceMode             //    1:Enalbe 
*                                //    0:Disable
*
*    CPL_Language_Selection      //    Langeage value.Default value is 0.DO NOT cahneg it.
*    CPL_Envirnment_Selection    //    Envirnment value.Default value is 0.DO NOT cahneg it.
*    CPL_SPDIFOUT_Enable         //    S/PDIF Out enable/disable.Default value is 1.DO NOT cahneg it.
*    
*    CPL_SR_EN                   //    Auto sample rate value.Default value is 0.DO NOT cahneg it.
*    CPL_SR_OP=0                 //    Sample rate value.Default value is 0.DO NOT cahneg it.
*    LinkedRecord_0              //    Recording Linked.Default value is 268435455.DO NOT cahneg it.
*    LinkedRecord_1              //    Palyback Linked.Default value is 268435455.DO NOT cahneg it.
*    LinkedRecord_2              //    Master volume Linked.Default value is 268435455.DO NOT cahneg it.
*    TG_link_Enable              //    TG link enable/disable.Default value is 0.DO NOT cahneg it.
*    HW_Volume_Default_value     //    Hardware volume control.Default value is 0.DO NOT cahneg it.
*    Hide_HW_VolumeCtrl          //    Show or hide  hardware volume contro option.
*                                //    Show:0 Hide:1
*    Hide_Bass_management        //    Show or hide  bass management page.
*                                //    Show:0 Hide:1
*    GPIO11Status                //    GPIO pin 11 .Default value is 0.DO NOT cahneg it.
*    Hide_Auto_Sample_Rate       //    Show or hide  auto sample rate option.
*                                //    Show:0 Hide:1   
*    Hide_High_Sample_Rate       //    Show or hide  high sample rate option.
*                                //    Show:0 Hide:1
*    VT1618_Reboot_Flag          //    Special case in VT1618 codec.Default value is 0.
*
* [EQ_Preset]                    //    Do not change the key value.
* [BassManagement]		 //    Do not change the key value.
* [HardwaveFilter]               
*    DefaultOption               //    0: Response 1 - half band FIR. 
*                                //    1: Response 4 - no alias linear phase. 
*                                //    2: Response 5 - No alias minimum phase.
*******************************************************************************
[Default]
SR_Limited=0
skin_name=skin.bmp
SQ_Is_Enable=0

[DynamicSetting]
Is_first_boot=1
SQ_Is_Enable=0
CPL_SpeakerCfg=2
CPL_SPDIFIN_SpdifInSwitch=32768
CPL_SPDIFIN_wMonitorDevice=0
CPL_Language_Selection=0
CPL_Envirnment_Selection=0
PerformanceMode=0
CPL_SPDIFOUT_Enable=1
CPL_SR_EN=0
CPL_SR_OP=0
LinkedRecord_0=268435455
LinkedRecord_1=268435455
LinkedRecord_2=268435455
TG_link_Enable=0
HW_Volume_Default_value=1
Hide_HW_VolumeCtrl=0
Hide_Bass_management=1
GPIO11Status=0
Hide_Auto_Sample_Rate=0
Hide_High_Sample_Rate=0
VT1618_Reboot_Flag=0

[EQ_Preset]
ItemCount=4
Item0=Techno,8,17,31,44,41,20,29,36,17,1
Item1=Jazz,22,29,43,43,44,31,29,29,29,29
Item2=Pop,29,29,29,41,43,43,41,41,38,29
Item3=Classic,0,0,0,0,0,0,0,-8,-10,-8

[BassManagement]
bass_speaker_item_count=5
bass_speaker_item_0=Front large and Others large
bass_speaker_item_1=Front large and Others small
bass_speaker_item_2=Front small and Others large
bass_speaker_item_3=Front small and Others small
bass_speaker_item_4=User customizable
bass_speaker_item_5=Front large
bass_speaker_item_6=Front small
bass_speaker_item_7=All large
bass_speaker_item_8=All small
bass_speaker_item_9=Off

bass_subwoofer_item_count=3
bass_subwoofer_item_0=LFE + Bass Out
bass_subwoofer_item_1=LFE Only
bass_subwoofer_item_2=Bass Out Only

bass_lpf_item_count=4
bass_lpf_item_0=40  Hz
bass_lpf_item_1=60  Hz
bass_lpf_item_2=90  Hz
bass_lpf_item_3=110 Hz

Default_bBASS_MANAGE_ENABLED=0
Default_CutoffFreq=1
Default_LFESpkr=1
Default_MultiChlCofig_0=1
Default_MultiChlCofig_1=1
Default_MultiChlCofig_2=1
Default_MultiChlCofig_3=0
Default_MultiChlCofig_4=1
Default_MultiChlCofig_5=1
Default_MultiChlCofig_6=1
Default_MultiChlCofig_7=1

[HardwaveFilter]               
DefaultOption=0 
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.50