Windows NT 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT v4.0
driver for PCI ethernet adapter.
Location of Driver: \WINNT40\RTL8029.SYS
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
1. Start Windows NT 4.0, then click the Start button.
2. Open the Settings menu and select Control Panel.
3. Double-click the Network icon.
4. If you have previously installed a network adapter on the computer:
- Click Adapters in the Network window
- Click Add
If you have not installed a network adapter on the computer:
- Click Yes in the Network Configuration dialog box
- Select Wired to the Network in the Network Setup Wizard window
- Click Next to continue
- Click the Select from list button
5. Click the Have Disk button in the Select Network Adapter window.
The Insert Disk window appears.
6. Insert the Driver Disk into the floppy drive.
7. At the prompt, type the following:
A:\WINNT40
8. Click OK.
A screen appears with "Input Ethernet ID" dialog box which is
provided by the driver. This option is only required when you have
more than one PCI ethernet adapters in the computer.
9. Select SKIP, if only one adapter is installed in this computer.
Windows NT will perform the "Bindings Configuration" process. If any
additional network software options were installed, you may be
prompted for specific information for these packages.
10. Complete the installation by following the instructions provided by
Windows NT.
11. Restart the computer.
NOTES: Installing Multiple LAN Adapters:
Start Windows NT and follow above setup procedure. Click
"Properties...", and then the "Input Ethernet ID" dialog box appears
and enter adapter's Ethernet ID. Select OK and close Network setup.
Select SKIP if only one adapter is installed in this computer.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.