1. D20060-001-001.exe Driver
2. raidcfg.txt File Contents

raidcfg.txt Driver File Contents (D20060-001-001.exe)

************************************************************
************************************************************
*
*  RAID Configuration Utility Readme.
*
*  This document makes references to products developed by
*  Intel. There are some restrictions on how these products
*  may be used, and what information may be disclosed to
*  others. Please read the Disclaimer section at the bottom
*  of this document, and contact your Intel field
*  representative if you would like more information.
*
************************************************************
************************************************************

************************************************************
*  
*  Intel is making no claims of usability, efficacy or 
*  warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained
*  within the included “Readme” file completely defines the 
*  license and use of this software.
*
************************************************************

************************************************************
*  CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1.  OVERVIEW
2.  SYSTEM REQUIREMENTS
3.  ENTERING THE CONFIGURATION UTILITY USER INTERFACE
4.  RAID CONFIGURATION UTILITY USAGE


************************************************************
* 1.  OVERVIEW
************************************************************

The RAID Configuration utility is an executable supported
for MS-DOS* and Microsoft* Windows* with capabilities similar 
to the Intel(R) Matrix Storage Manager option ROM. 
It provides customers with the ability to create,
delete, and manage any RAID volumes on a system from within 
DOS or Windows environment. 
For ease of use, the utility has command line
parameters that make it possible to perform these functions
through the use of DOS scripts or shell commands. 


************************************************************
* 2.  SYSTEM REQUIREMENTS
************************************************************

1. The system must contain an Intel(R) Pentium(R) Processor 
    and one of the following Intel products:

        

2.  The system must support one of the following operating
    systems:
    - MS-DOS*
    - Microsoft* Windows* XP Home Edition, 
    - Microsoft* Windows* XP Professional,
    - Microsoft* Windows* XP 64-bit Edition for 64-bit Extended System
    - Microsoft* Windows* 2000 Professional, 
    - Microsoft* Windows* 2000 Advanced Server, 
    - Microsoft* Windows* Server 2003,and
    - Microsoft* Windows* Media Center Edition


************************************************************
* 3.  ENTERING THE CONFIGURATION UTILITY USER INTERFACE
************************************************************

3.1 RaidCfg executable for MS-DOS*
1.  Boot the system to DOS.
2. To enter the User Interface, run Raidcfg.exe with no command line parameters.
3.  For commandline mode, run Raidcfg.exe with appropriate command line parameters.

3.2. RaidCfg32 executable for Microsoft* Windows*
Use the following steps to run Raidcfg32:
1.  Boot the system to Windows.
2.  Run Raidcfg32.exe with appropriate command line parameters.


************************************************************
* 4.  RAID CONFIGURATION UTILITY USAGE
************************************************************

4.1 RaidCfg Utility Usage

RaidCfg.exe [/?] [/Y] [/Q] [/C:vol_name] [/SS:strip_size] 
            [/L:raid_level] [/S:vol_sizel] [/DS:disk_ports] 
            [/D:vol_name] [/X] [/I] [/P] [/U] [/ST] [/OR] [/CS:file_name]
            [/F:vol_name]

/?    Displays Help Screen.  Other options ignored.
/Y    Suppress any user input. Used with options /C, /D, 
      /X, & /F.
/Q    Quiet mode / No output. Should not be used with status commands.
      COMMANDS - Only one at a time.
/C    Create a volume with the specified name.
      /S, /DS, /SS, & /L can be specified along with /C.
/SS   Specify strip size in KB.  Only valid with /C
/L    Specify RAID Level (0, 1, 10, or 5).  Only valid with /C
/S    Specify volume size in GB or percentage if a '%' is appended.
      Percentage must be between 1-100.  Only valid with /C
/DS   Selects the disks to be used in the creation of volume.
      List should be delimited by spaces.
/D    Delete Volume with specified name.
/X    Remove all metadata from all disks. Use with /DS to delete
      metadata from selected disks.
/I    Display All Drive/Volume/Array Information.  /P can be specified.
/P    Pause display between sections. Only valid with /I.
/U    Do not delete the partition table. Only valid with  /C.
/OR  Run the status/UI same as the OROM.
/ST   Display Volume/RAID/Disk Status.
/CS   Captures the screen to file from screen buffer. Only valid with /ST
/F    Repair failed RAID0 Volume.

4.2 RaidCfg32 Utility Usage

RaidCfg32.exe [/?] [/Y] [/Q] [/RD] [/SPARE:drive] [/C:vol_name] [/SS:strip_size]
              [/L:raid_level] [/S:vol_sizel] [/DS:disk_ports] [/D:vol_name] [/X]
              [/I] [/P] [/ST] [/STD] [/STV] [/F:vol_name]

/?      Displays Help Screen.  Other options ignored.
/Y      Suppress any user input. Used with options /C, /D, /X, & /F.
/Q      Quiet mode / No output. Should not be used with status commands.
        COMMANDS - Only one at a time.
/RD     Inquire if the raid driver is running
/SPARE  Set a drive to be a spare
/C      Create a volume with the specified name.
        /S, /DS, /SS, & /L can be specified along with /C.
/SS     Specify strip size in KB.  Only valid with /C
/L      Specify RAID Level (0, 1, 10, or 5).  Only valid with /C
/S      Specify volume size in GB or percentage if a '%' is appended.
        Percentage must be between 1-100.  Only valid with /C
/DS     Selects the disks to be used in the creation of volume.
        List should be delimited by spaces.
/D      Delete Volume with specified name.
/X      Remove all metadata from all disks. Use with /DS to delete
        metadata from selected disks.
/I      Display All Drive/Volume/Array Information.  /P can be specified.
/P      Pause display between sections. Only valid with /I.
/ST     Display Volume/RAID/Disk Status.
/STD    Display delimited Disk Status
        Port,Model,SerialNumber,FirmwareVersion,Array,Status,Size,Free,Type
/STV    Display delimited Volume Status
        Index,Level,StripSize,Size,Status,Bootable,Array,Name
/F      Repair failed RAID0 Volume.


Copyright (c) Intel Corporation, 2001-2005
************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
************************************************************
INTEL SOFTWARE LICENSE AGREEMENT (Alpha/Beta, Organizational
Use)

IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 

Do not use or load this software and any associated 
materials (collectively, the "Software") until you have 
carefully read the following terms and conditions. By 
loading or using the Software, you agree to the terms of 
this Agreement. If you do not wish to so agree, do not 
install or use the Software.

The Software contains pre-release "alpha" or "beta" code, 
which may not be fully functional and which Intel 
Corporation ("Intel") may substantially modify in producing 
any "final" version of the Software.  Intel can provide no 
assurance that it will ever produce or make generally 
available a "final" version of this Software.

LICENSE. This Software is licensed for use only in 
conjunction with Intel component products.  Use of the 
Software in conjunction with non-Intel component products 
is not licensed hereunder. You may copy the Software onto 
your organization's computers for your organization's use, 
and you may make a reasonable number of back-up copies of 
the Software, subject to these conditions: 
1. You may not copy, modify, rent, sell, distribute or 
transfer any part of the Software, except as provided in 
this Agreement, and you agree to prevent unauthorized 
copying of the Software.
2. You may not reverse engineer, decompile or disassemble 
the Software. 
3. You may not sublicense the Software.                    
4. The Software may contain the software or other property 
of third party suppliers, some of which may be identified  
in, and licensed in accordance with, an enclosed           
"license.txt" file or other text or file. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies  
of the Software remains with Intel or its suppliers. The    
Software is copyrighted and protected by the laws of the 
United States and other countries, and international treaty 
provisions. You may not remove any copyright notices from 
the Software.  Intel may make changes to the Software, or 
to items referenced therein, at any time and without 
notice, but is not obligated to support or update the 
Software. Except as otherwise expressly provided, Intel 
grants no express or implied right under Intel patents, 
copyrights, trademarks or other intellectual property 
rights. You may transfer the Software only if the recipient 
agrees to be fully bound by these terms and if you retain 
no copies of the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered 
by Intel on physical media, Intel warrants the media to be 
free from material physical defects for a period of (90) 
ninety days after delivery by Intel. If such a defect is 
found, return the media to Intel for replacement or 
alternate delivery of the Software, as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, 
THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR 
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF 
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A 
PARTICULAR PURPOSE.  Intel does not warrant or assume 
responsibility for the accuracy or completeness of any 
information, text, graphics, links or other items contained 
within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS 
SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, 
WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION 
OR LOST INFORMATION) ARISING 
OUT OF THE USE OF OR THE INABILITY TO USE THE SOFTWARE, 
EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR 
LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR 
CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE 
LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER 
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this 
Agreement at any time if you violate its terms. Upon 
termination, you will immediately destroy the Software or 
return all copies of the Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall 
be governed by the laws of California, excluding its 
principles of conflict of laws and the United Nations 
Convention on Contracts for the Sale of Goods. You may not 
export the Software in violation of applicable export laws 
and regulations. Intel is not obligated under any other 
agreements, unless they are in writing and signed by an 
authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with 
"RESTRICTED RIGHTS." Use, duplication or disclosure by the 
Government is subject to restrictions as set forth in 
FAR52.227-14 and DFAR252.227-7013 et seq. or their 
successors. Use of the Software by the Government 
constitutes acknowledgment of Intel's proprietary rights 
therein. Contractor or Manufacturer is Intel Corporation, 
2200 Mission College Blvd., Santa Clara, CA 95052.
SLA-ALPHABETA-ORG.DOC/RBK/01-21-00
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >