1. 7507508.exe Driver
2. readme.txt File Contents

readme.txt Driver File Contents (7507508.exe)

Before updating your system BIOS be sure to read the following.

1. Preparing your system
2. Copying the files
3. Performing the update

Preparing your system.

NOTE:
The BIOS update utility will load default settings in all the fields
accessible with the BIOS setup utility. If you made changes to the current
BIOS setup fields and wish to retain the settings in those fields, then
perform the following steps before proceeding with the BIOS update:

Reset the system and enter the BIOS setup utility by pressing the F1 key
Write all the Custom Bios setup values that you custom setup so 
you can manually change back the custom setup values after the Bios 
update completed.

1. Before you can update your bios, you must first prepare a disk.
	
	Make a bootable floppy diskette.

2.     Copying the files

        Create a "Bios" directory on your hard drive, and copy the bios file
	to that directory.
        Double Click on the file to expand it.
        Copy all of the files to the bootable floppy disk.

   	    The disk is now ready.

3.     Performing the update

Reboot the computer with the diskette in the A:\ drive. The BIOS update
utility will automatically perform the following steps in sequence:

a. Update the boot block portion of the BIOS
b. Update the system BIOS
c. Reset all CMOS settings to default values
d. Restart the system to activate changes

NOTE: remove the BIOS update disk from the floppy drive after the BIOS
update utility resets the system.

4. The BIOS update process is now complete. If changes need to be made to
any of the BIOS setup fields, reset the system and enter the BIOS setup
utility by pressing the F1 key and make any necessary changes. Go to Exit
and Exit save changes to reset the systems.

Applicable Part Numbers:
4000056,4000405,4000425,4000456,4000620