1. 1007dq0t.exe Driver
2. MAIL07.TXT File Contents

MAIL07.TXT Driver File Contents (1007dq0t.exe)

The 1.00.07.DQ0T BIOS is released for increased INT13 functionality
(relating to Bootable CDs and faster boot times), and APM v1.2 support.
This BIOS will work for the P5-120, P5-133, P5-166, and P5-200 systems
based on the MAILMAN, MAILMAN P55C/USB, and HITMAN motherboards [DQ0T
series BIOS]. Identification of the specific motherboard can be done by an
additional identifier following the "DQ0T" extension of the BIOS version;

        1.00.07.DQ0T            => MAILMAN [No other additional identifier]
        1.00.07.DQ0T UAV        => MAILMAN P55C/USB
        1.00.07.DQ0T U          => HITMAN

Upgrading Your BIOS
===================

To properly install the BIOS, follow these steps (if you received this
as a diskette, skip to step #2):

1.  Make a bootable flash and recovery diskette as follows:

     a. Format a blank floppy as a system disk. At the DOS prompt
        type: C:> FORMAT A: /S

     b. Copy the 1007DQ0T.EXE file in your download directory to the
        formatted diskette.  Expand the files by changing to the a:
        drive and then typing in 1007DQ0T and hitting the Enter key.

     c. You now have a "Bootable Flash Disk".


    IMPORTANT: Before continuing, you should enter the CMOS setup
        utility and record your settings, as they will be needed after
        the Flash Update is done in case some of the settings are
        corrupted during the upgrade.

2.  Reboot you computer with your "Bootable Flash Disk" in drive A.
    You can do this with the RESET button or CTRL-ALT-DEL.

3.  The system will come up with the "Flash Memory Update
    Utility" screen. Press ENTER to continue.

4.  The "Main Menu" will appear.  With a help box describing
    the options.  Using the down arrow key highlight the option
    "Update Flash Memory Area From A File".  Press ENTER to
    continue.

5.  The "Update Flash Area" window will appear.  "Update
    System BIOS" should be highlighted (if it is not use the
    arrow keys to highlight it).  With "Update System BIOS"
    highlighted.  Press ENTER to continue.

6.  The "Enter Path/Filename" window will appear.  Press the
    down arrow key once to highlight "1007DQ0T.BIO" in the
    Files Box.  Press ENTER to continue.

7.  After a short wait, the "Verify Image" window should
    appear.  "Continue With Programming" should be
    highlighted.  Press ENTER to upgrade.

8.  After a short wait, a message window should appear.
    "Continue" should be highlighted. **Remove the flash
    disk from the floppy drive and press enter.**

9.  The system will reboot with: "BIOS Version 1.00.07.DQ0T [ID]"
    at the upper left hand corner.

10. Your BIOS has now been upgraded to the new version.

11. Double check your CMOS settings to verify the HDD settings are
    correct.