README.TXT Driver File Contents (DFE-530TX.zip)

  Linux

  The procedure to activate DFE-530TX+ on Red Hat 6.X linux is as follows:

  step 1: copy the driver rtl8139.c from driver disk to you linux.

  step 2: compile:
          The instruction for compiling the driver is include at the end
          of the driver file. (run this instruction at /usr/src/linux)
          Or you can use the Makefile included in the driver disk \Linux.

  step 3: insert the driver as module:
           insmod rtl8139.o
          (run 'lsmod' to see if the module is inserted)

  step 4: bind your card to an IP address

          /sbin/ifconfig eth0 ${IPADDR} broadcast ${BROADCAST} 
          netmask ${NETMASK}
          (run 'netstat -i' to see if there is a interface 'eth0')

  step 5: add your card to IP routing table, then add gateway also your 
          card:
          /sbin/route add -net ${NETWORK} netmask ${NETMASK} eth0
           (should be able to ping local network now)
          gateway:
          /sbin/route add default gw ${GATEWAY} netmask 0.0.0.0 metric 1

  step 6: start inet deamon.
          /usr/sbin/inetd
          (you are on the network now)

  *make sure that your kernel is built with network, fast_ethernet and module
   support. Otherwise, you have to rebuild your kernel.
        (1:go to /usr/src/linux directory
         2:run 'make menuconfig' or 'make config'
         3:mark the options list above.
         4:exit and rebuild your kernel.
           make dep;make clean;make zImage
           the file 'zImage' will be at /usr/src/linux/arch/i386/boot/zImage
         5:modify /etc/lilo.conf.(this file specify where kernel image is)
         6:run 'lilo'  )

  You can run 'netconfig' which will do step 4,5,6 for you.
  Then just add a line at the beginning of '/etc/rc.d/init.d/network'.
        'insmod /your driver path/rtl8139.o'

  then your driver will work every time you boot.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.16