MSLANMAN.TXT Driver File Contents (DFE-530TX.zip)

   LAN Manager Workstation/Server

   Introduction:
   -------------
   This document describes the procedure to setup LAN  Manager 2.1
   Workstation/Server driver for D-Link DFE-530TX+ PCI Adapter.

   Location of Driver: \MSLANMAN.DOS\DRIVERS\ETHERNET\DLKRTS\DLKRTS.DOS
                      

   Sample Configuration Files:
   ---------------------------
   CONFIG.SYS :

      DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
      DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DLKRTS\DLKRTS.DOS

   PROTOCOL.INI (will contain):

      [DLKRTL]
      ; DFE-530TX+ RPOTOCOL.INI SAMPLE
      DriverName=DLKRTS$
      EtherID=@52544C111111  ;This keyword is used to desinate a DFE-530TX+
                             ;adapter by assigning its ethernet ID
                             ;when more than one adapters exist on one
                             ; system.

      Medium= _Auto, _10Half, _10Full, _100half, _100Full      
                         ;This keyword is used to force DFE-530TX+ adapter
                         ;to speed 10M or 100M mode. If not present,
                         ;the driver will auto-detect the speed.


   Setup driver procedures on LAN Manager workstation/server :
   -----------------------------------------------------------
   Before you start with the installation process, make sure that the
   adapter is properly installed and configured. Make sure your
   Microsoft LAN Manager is properly installed.

   1. Run the appropriate Microsoft Lan Manager SETUP for computer you
      are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
      item ,(the driver isn't included on the Lan Manager disk)
      and insert the DFE-530TX+ driver disk, select the DFE-530TX+
      driver and follow the directions.

   2. When completed, reboot your computer.

   Installing Multiple LAN Adapters:
   ---------------------------------

   To Follow Setup driver Procedure and add two adapter,

   Under  DOS  mode, you can modify the EtherID or BusNo+DeviceNo
   Keyword field in file C:\LANMAN\PROTOCOL.INI.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.53