#New INI configuration created by Widget for STAC9227
[ActionItems]
[Models]
HDAUDIO\FUNC_01&VEN_8384&DEV_7618&SUBSYS_80860103=i92xxG2.ini ;Cash Canyon
HDAUDIO\FUNC_01&VEN_8384&DEV_7618&SUBSYS_107B5058=i92xxG2.ini ;Mickelson Trail GTW
HDAUDIO\FUNC_01&VEN_8384&DEV_7618&SUBSYS_107B5059=i92xxG2.ini ;Wood Island GTW
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\SigmaTel\StacGUI=yes
HKCU\Software\SigmaTel\Settings=yes
HKLM\Software\Sigmatel\STSysTray=yes
HKLM\SOFTWARE\SigmaTel\GlobalState=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=yes
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio2=yes
HKCU\Software\Microsoft\Multimedia\Sound Mapper=Yes
[APPS]
[CopyFiles.32]
stacgui.cpl = 0x25
stlang.dll = 0x25
stacsv.exe = 0x25
sttray.exe = 0x24
[CopyFiles.64]
stacui64.cpl = 0x25
stlang64.dll = 0x25
stacsv64.exe = 0x25
sttray64.exe = 0x24
[ReplaceDlls.32]
stapo.dll = 0x25
stcplx.dll = 0x25
[ReplaceDlls.64]
stapo64.dll = 0x25
stcplx64.dll = 0x25
[StartServices.32]
STacSV -r
[StartServices.64]
STacSV64 -r
[StartPrograms.32]
STtray
[StartPrograms.64]
STtray64
[StopServices.32]
STacSV -u
[StopServices.64]
STacSV64 -u
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run.32]
SigmatelSysTrayApp="sttray.exe"
[HKLM\Software\Microsoft\Windows\CurrentVersion\Run.64]
SigmatelSysTrayApp="sttray64.exe"
[HKLM\SOFTWARE\SigmaTel\GlobalState\STSysTray\1.0]
ShowEventDialog = dword: 1
MultiStream = dword: 1
[HKLM\Software\Sigmatel\STSysTray\1.0.32]
HideTrayIcon = dword: 0
PollingPeriod = dword: 200
RecordPriority = dword: 1
ControlPanel = "stacgui.cpl"
Automatic = dword: 1
PopUpType = dword: 1
HwSpkCfg = dword: 1
MultiStream = dword: 1
[HKLM\Software\Sigmatel\STSysTray\1.0.64]
HideTrayIcon = dword: 0
PollingPeriod = dword: 200
RecordPriority = dword: 1
ControlPanel = "stacui64.cpl"
Automatic = dword: 1
PopUpType = dword: 1
HwSpkCfg = dword: 1
MultiStream = dword: 1
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions]
Version=dword:1
;;;JackSequence(nid)==0 not slaved, i.e. In use by RTC
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\StreamRenderStart1]
; Check if MS feature is enabled
Action1="msenabled=GetGlobalRegDword("MultiStream",0)"
; Steal the front HP if enable. Force it back otherwise in case feature was disabled at some point
Action2="if((msenabled),(SetDeviceType(10,2) && SetVerified(10,1)),(SetDeviceTypeSlaved(10,2) && SetVerified(10,1)))"
Action3="if((msenabled),(MutePin(13,0) && MutePin(14,0) && MutePin(15,0)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\StreamRenderStop1]
; Front stream stopped so give the HP to the back device
Action0="SetDeviceTypeSlaved(10,2) && SetVerified(10,1)"
Action1="pluggedin10=JackState(10)"
Action2="pluggedin13=JackState(13)"
Action3="muterear=pluggedin10"
Action4="if((muterear),(MutePin(13,1) && MutePin(14,1) && MutePin(15,1)),(MutePin(13,0) && MutePin(14,0) && MutePin(15,0)))"
Action5="muteinternal=(pluggedin10 || pluggedin13)"
Action6="if((muteinternal),(MutePin(17,1)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresenseA]
; Make sure we are muted properly -- front HP is definitely in the rear device
Action00="slaved10=(JackSequence(10)==15)"
Action01="pluggedin10=JackState(10)"
Action02="pluggedin13=JackState(13)"
; A plug event on Port A is changes the mute state if it is slaved
Action03="muterear=(slaved10 && pluggedin10)"
Action04="if((muterear),(MutePin(13,1) && MutePin(14,1) && MutePin(15,1)),(0))"
Action05="muteinternal=(slaved10 && (pluggedin10 || pluggedin13))"
Action06="if((muteinternal),(MutePin(17,1)),(0))"
; unmute the correct port on unplug
Action07="unmuterear=(slaved10 && (!pluggedin10))"
Action08="if((unmuterear),(MutePin(13,0) && MutePin(14,0) && MutePin(15,0)),(0))"
Action09="unmuteinternal=(slaved10 && (!pluggedin10 && !pluggedin13))"
Action10="if((unmuteinternal),(MutePin(17,0)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\JackPresenseD]
;Always mute internals if rear is plugged in
Action0="slaved10=(JackSequence(10)==15)"
Action1="pluggedin10=JackState(10)"
Action2="pluggedin13=JackState(13)"
Action3="muteinternal=pluggedin13"
Action4="if((muteinternal),(MutePin(17,1)),(0))"
; Only unmute internals if both rear and a slaved front are unplugged
Action5="slaved10=(JackSequence(10)==15)"
Action6="unmuteinternal=(!(slaved10 && pluggedin10) && !pluggedin13)"
Action7="if((unmuteinternal),(MutePin(17,0)),(0))"
[HKLM\SOFTWARE\SigmaTel\STSysTray\1.0\EventExpressions\ServiceStartup]
; Front stream stopped so give the HP to the back device
Action0="SetDeviceTypeSlaved(10,2) && SetVerified(10,1)"
; Make sure we are muted properly -- front HP is definitely in the rear device
Action1="pluggedin10=JackState(10)"
Action2="pluggedin13=JackState(13)"
Action3="muterear=pluggedin10"
Action4="if((muterear),(MutePin(13,1) && MutePin(14,1) && MutePin(15,1)),(MutePin(13,0) && MutePin(14,0) && MutePin(15,0)))"
Action5="muteinternal=(pluggedin10 || pluggedin13)"
Action6="if((muteinternal),(MutePin(17,1)),(MutePin(17,0)))"
[HKR]
CodecName = "STAC9227"
[HKR\Settings]
InitVerbs = hex:
TraceFlags = dword: 0x89B3
CPL_SaveExtraPower = hex: 0
CPL_MaySwitchExtAmpPowerState = hex: 0
CPL_UserControlsMaySwitchExtAmpPowerState = hex: 0
CPL_SecondsAfter = dword: 5
CPL_UserControlsPowerManagementSettings = Hex: 0
CPL_SpdifTransmitterEnabledByUser = hex: 0
CPL_UserControlsFixedDigitalOutRate = hex: 0
CPL_FixedDigitalOutRate = dword: 0
MicBoostLevel = dword: 0x000A0000
Mic2BoostLevel = dword: 0x000A0000
EnableDLCDWA = hex: 0 ;turn off DAC left ch. distor. workaround, ok for 48k locked drivers
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x02214230 #0A# <STAC9227> (Port A:Pins39/41) Jack:1/8" Stereo/Mono, HP Out, Green, A:3, S:0, Loc:Primary Chassis Ext., Front, Det:No, Imp:Yes
CfgCurr = dword: 0x0221421F #0A# <STAC9227> (Port A:Pins39/41) Jack:1/8" Stereo/Mono, HP Out, Green, A:1, S:F, Loc:Primary Chassis Ext., Front, Det:No, Imp:Yes
AltCfg = hex: 30,42,21,02,1F,42,21,02 #0A#[HP Out,3,0][HP Out,1,F]
[HKR\Settings\Pin\0B]
CfgDflt = dword: 0x02A19040 #0B# <STAC9227> (Port B:Pins21/22) Jack:1/8" Stereo/Mono, Mic In, Pink, A:4, S:0, Loc:Primary Chassis Ext., Front, Det:No, Imp:No
Bias = hex: FF,04,02
Action = hex: 09,0B,0A,0B
[HKR\Settings\Pin\0C]
CfgDflt = dword: 0x400000FD #0C# <STAC9227> (Port C:Pins23/24) No Connection:Unknown Type, Line Out, Unknown, A:F, S:D, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x01114010 #0D# <STAC9227> (Port D:Pins35/36) Jack:1/8" Stereo/Mono, Speaker, Green, A:1, S:0, Loc:Primary Chassis Ext., Rear, Det:No, Imp:No
[HKR\Settings\Pin\0E]
CfgDflt = dword: 0x01119012 #0E# <STAC9227> (Port E:Pins14/15) Jack:1/8" Stereo/Mono, Speaker, Pink, A:1, S:2, Loc:Primary Chassis Ext., Rear, Det:No, Imp:No
Bias = hex: FF,04,02
AltCfg = hex: 20,92,A1,01 #0E#[Mic In,2,0]
Action = hex: 09,0E,0A,0E
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x01113211 #0F# <STAC9227> (Port F:Pins16/17) Jack:1/8" Stereo/Mono, Speaker, Blue, A:1, S:1, Loc:Primary Chassis Ext., Rear, Det:No, Imp:Yes
AltCfg = hex: 2E,32,81,01 #0F#[Line In,2,E]
Action = hex: 09,0F
[HKR\Settings\Pin\10]
CfgDflt = dword: 0x400000FC #10# <STAC9227> (Port G:Pins43/44) No Connection:Unknown Type, Line Out, Unknown, A:F, S:C, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\11]
CfgDflt = dword: 0x9027035F #11# <STAC9227> (Port H:Pins45/46) Fixed Function:Other Analog, HP Out, Unknown, A:5, S:F, Loc:Internal, N/A, Det:Yes, Imp:Yes
[HKR\Settings\Pin\12]
CfgDflt = dword: 0x400000FA #12# <STAC9227> (CD In:Pins18/19/20) No Connection:Unknown Type, Line Out, Unknown, A:F, S:A, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\21]
CfgDflt = dword: 0x400000F9 #21# <STAC9227> (SPDIF Out:Pin48) No Connection:Unknown Type, Line Out, Unknown, A:F, S:9, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\Pin\22]
CfgDflt = dword: 0x400000FF #22# <STAC9227> (SPDIF In:Pin47) No Connection:Unknown Type, Line Out, Unknown, A:F, S:F, Loc:Primary Chassis Ext., N/A, Det:No, Imp:No
[HKR\Settings\GPIO]
[HKR\Settings\Connselector]
[HKR\Settings\filter\Speaker]
UniqueID = hex: 0
LegacyIoctlHere = hex: 1
RenderConverter = hex: 2,5,4
SlavedHpConverter = hex: 3
Associations = hex: 1,5
DigitalVolumeControl = hex: 0
#turn off analog input monitor
EnableInputMonitor = hex: 0
KeepAdcAlwaysOn = hex: 0
MasterControlsIndependentMixerInputs = hex: 0
EnableSetFormatSupport = hex: 1
EnableHwSpeakerConfigurationSupport = hex: 0
EnableRenderConvertersAutoSearch = hex: 1
#Analog Input Monitor
EnableInputMonitor = hex: 1
KeepAdcAlwaysOn = hex: 1
[HKR\Settings\filter\HpOut]
UniqueID = hex: 1
LegacyIoctlHere = hex: 0
RenderConverter = hex: 3
Associations = hex: 3
DigitalVolumeControl = hex: 0
EnableInputMonitor = hex: 1
KeepAdcAlwaysOn = hex: 1
MasterControlsIndependentMixerInputs = hex: 0
EnableSetFormatSupport = hex: 1
EnableHwSpeakerConfigurationSupport = hex: 0
EnableRenderConvertersAutoSearch = hex: 1
[HKR\Settings\filter\MuxedIn]
UniqueID = hex: 2
LegacyIoctlHere = hex: 0
CaptureConverter = hex: 7
EnableCompositeMuxAndAdcCtrl = hex: 0
Associations = hex: 2
DigitalVolumeControl = hex: 0
MicBoost = hex: 0
MicInRecVolume = dword: 0x000a8000
LineInRecVolume = dword: 0x000a8000
[HKR\Settings\filter\MuxedIn\TopoNames]
MicIn = "{A72A6A9C-896A-45ce-AD88-6BB096B11B36}" #Rear Mic
[HKR\Settings\filter\MuxedIn\MaxLvlLimiters]
MicIn = dword: 0x000c0000
[HKR\Settings\filter\MicIn]
UniqueID = hex: 3
LegacyIoctlHere = hex: 0
CaptureConverter = hex: 8
EnableCompositeMuxAndAdcCtrl = hex: 0
Associations = hex: 4
DigitalVolumeControl = hex: 0
MicBoost = hex: 0
[HKR\Settings\filter\MicIn\TopoNames]
MicIn = "{352C0745-44F9-4c58-B706-744C88A1FCE7}" #Front Mic
###Begin Alternate Name string section for AnalogOut (LineOut or Speaker)
[HKLM\SYSTEM\CurrentControlSet\Control\MediaCategories\{352C0745-44F9-4c58-B706-744C88A1FCE7}]
Display = hex: 00,00,00,00
Name = "Front Mic"
###End Alternate Name string
[HKR\Settings\filter\MicIn\MaxLvlLimiters]
MicIn = dword: 0x000c0000
[HKLM\SOFTWARE\Sigmatel\STacGUI]
Config_Tab = dword: 0xA
Config_Spk = dword: 0x21
Config_Adv = dword: 0x8100
Config_Portmap = dword: 0xC
Config_MicLevN = dword: 0x1
MicBoost[0] = dword: 0xA
Config = dword: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML]
Nconfigs = dword: 0x3
GroupOffset = dword: 0x1
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]]
Name = "IDS_CONFIG_OPEN"
Desc = "IDS_CONFIG_OPEN"
Njacks = dword: 0x5
SpkConfig = dword: 0x4
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Panel[1]]
X1 = dword: 0xA0
X2 = dword: 0x112
Y1 = dword: 0x50
Y2 = dword: 0x165
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Panel[2]]
X1 = dword: 0x1CC
X2 = dword: 0x23E
Y1 = dword: 0x50
Y2 = dword: 0x106
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[0]]
Pos = dword: 0x2
Port = dword: 0xA
Color = dword: 0x4 ;Green
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0xE
X2 = dword: 0x57
Y2 = dword: 0x4A
Ntypes = dword: 0x1
Dev[0] = dword: 0x2 ;HP Out
Seq[0] = hex: 0xF
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[1]]
Pos = dword: 0x2
Port = dword: 0xB
Color = dword: 0x9 ;Pink
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x60
X2 = dword: 0x57
Y2 = dword: 0x9C
Ntypes = dword: 0x1
Dev[0] = dword: 0xA ;Mic In
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[2]]
Pos = dword: 0x1
Port = dword: 0xF
Color = dword: 0x3 ;Blue
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x19
X2 = dword: 0x57
Y2 = dword: 0x55
Ntypes = dword: 0x2
Dev[0] = dword: 0x8 ;Line In
Seq[0] = hex: 0xE
Dev[1] = dword: 0x1 ;Speaker
Seq[1] = hex: 0x1
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[3]]
Pos = dword: 0x1
Port = dword: 0xD
Color = dword: 0x4 ;Green
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x6C
X2 = dword: 0x57
Y2 = dword: 0xA8
Ntypes = dword: 0x1
Dev[0] = dword: 0x1 ;Speaker
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[0]\Jack[4]]
Pos = dword: 0x1
Port = dword: 0xE
Color = dword: 0x9 ;Pink
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0xBE
X2 = dword: 0x57
Y2 = dword: 0xFA
Ntypes = dword: 0x2
Dev[0] = dword: 0xA ;Mic In
Seq[0] = hex: 0x0
Dev[1] = dword: 0x1 ;Speaker
Seq[1] = hex: 0x2
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]]
Name = "IDS_CONFIG_STEREO"
Desc = "IDS_CONFIG_STEREO"
Njacks = dword: 0x5
SpkConfig = dword: 0x4
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Panel[1]]
X1 = dword: 0xA0
X2 = dword: 0x112
Y1 = dword: 0x50
Y2 = dword: 0x165
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Panel[2]]
X1 = dword: 0x1CC
X2 = dword: 0x23E
Y1 = dword: 0x50
Y2 = dword: 0x106
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Jack[0]]
Pos = dword: 0x2
Port = dword: 0xA
Color = dword: 0x4 ;Green
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0xE
X2 = dword: 0x57
Y2 = dword: 0x4A
Ntypes = dword: 0x1
Dev[0] = dword: 0x2 ;HP Out
Seq[0] = hex: 0xF
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Jack[1]]
Pos = dword: 0x2
Port = dword: 0xB
Color = dword: 0x9 ;Pink
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x60
X2 = dword: 0x57
Y2 = dword: 0x9C
Ntypes = dword: 0x1
Dev[0] = dword: 0xA ;Mic In
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Jack[2]]
Pos = dword: 0x1
Port = dword: 0xF
Color = dword: 0x3 ;Blue
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x19
X2 = dword: 0x57
Y2 = dword: 0x55
Ntypes = dword: 0x1
Dev[0] = dword: 0x8 ;Line In
Seq[0] = hex: 0xE
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Jack[3]]
Pos = dword: 0x1
Port = dword: 0xD
Color = dword: 0x4 ;Green
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x6C
X2 = dword: 0x57
Y2 = dword: 0xA8
Ntypes = dword: 0x1
Dev[0] = dword: 0x1 ;Speaker
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[1]\Jack[4]]
Pos = dword: 0x1
Port = dword: 0xE
Color = dword: 0x9 ;Pink
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0xBE
X2 = dword: 0x57
Y2 = dword: 0xFA
Ntypes = dword: 0x1
Dev[0] = dword: 0xA ;Mic In
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]]
Name = "IDS_CONFIG_51"
Desc = "IDS_CONFIG_51"
Njacks = dword: 0x5
SpkConfig = dword: 0x6
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Panel[1]]
X1 = dword: 0xA0
X2 = dword: 0x112
Y1 = dword: 0x50
Y2 = dword: 0x165
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Panel[2]]
X1 = dword: 0x1CC
X2 = dword: 0x23E
Y1 = dword: 0x50
Y2 = dword: 0x106
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Jack[0]]
Pos = dword: 0x2
Port = dword: 0xA
Color = dword: 0x4 ;Green
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0xE
X2 = dword: 0x57
Y2 = dword: 0x4A
Ntypes = dword: 0x1
Dev[0] = dword: 0x2 ;HP Out
Seq[0] = hex: 0xF
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Jack[1]]
Pos = dword: 0x2
Port = dword: 0xB
Color = dword: 0x9 ;Pink
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x60
X2 = dword: 0x57
Y2 = dword: 0x9C
Ntypes = dword: 0x1
Dev[0] = dword: 0xA ;Mic In
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Jack[2]]
Pos = dword: 0x1
Port = dword: 0xF
Color = dword: 0x3 ;Blue
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x19
X2 = dword: 0x57
Y2 = dword: 0x55
Ntypes = dword: 0x1
Dev[0] = dword: 0x1 ;Speaker
Seq[0] = hex: 0x1
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Jack[3]]
Pos = dword: 0x1
Port = dword: 0xD
Color = dword: 0x4 ;Green
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0x6C
X2 = dword: 0x57
Y2 = dword: 0xA8
Ntypes = dword: 0x1
Dev[0] = dword: 0x1 ;Speaker
Seq[0] = hex: 0x0
[HKLM\Software\SigmaTel\StacGUI\XML\Configuration[2]\Jack[4]]
Pos = dword: 0x1
Port = dword: 0xE
Color = dword: 0x9 ;Pink
Label = dword: 0x1
X1 = dword: 0x1B
Y1 = dword: 0xBE
X2 = dword: 0x57
Y2 = dword: 0xFA
Ntypes = dword: 0x1
Dev[0] = dword: 0x1 ;Speaker
Seq[0] = hex: 0x2
[History]
12/29/2005 Created by Widget Version: 8.3.404
12/29/2005 Updated by WIDGET
1/11/06 Add input mute actions
1/13/06 Remove bad 2nd sub-device
1/16/06 Switch Mic and Rear Mic labels
1/20/2006 Updated by WIDGET
1/26/2006 Updated by WIDGET
1/27/2006 Updated by WIDGET, changed LineOut's to Speakers
2/7/06 Add Digital Mixer config
2/7/2006 Updated by WIDGET
2/8/06 Correct the XML
2/8/06 Add event expressions for muting inputs
2/9/06 Revert DIM & DSM by turning them off
2/9/06 Add TurnBiasOffOnNotSelectedPin
2/10/2006 Updated by WIDGET
2/13/2006 Updated by WIDGET, switch port's C and F, change defaults for E and F
2/16/2006 Updated by WIDGET, add port h, turn on DIM
2/28/06 Replace event expressions with action's (new driver)
3/3/2006 Updated by WIDGET
4/5/06 Add slaved hp support for port H
5/17/06 Update XML and add Automatic input switching
6/9/06 Make STTRAY visible
6/19/06 Make 5.1 the default to prevent pops
6/16/06 Remove input muting action on FP Mic port B
6/20/06 Add EnableDLCDWA to turn off DAC left ch. distor. workaround, ok for 48k locked drivers
6/30/06 Update to Vista Stage2 Beta (multiple independent sub-devices)
9/14/06 remove pwr mgmt per Mark
9/21/06 Remove TurnBiasOffOnNotSelectedPin
9/28/06 Add default volume settings for inputs
10/10/06 Remove Port B from MuxedIn device
11/9/06 Remove 48K rate locks and rename LineOut to Speaker
11/21/06 Remove SKPI defaults
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.