[ env.ini ] set var=CONF_REGION value="World" set var=CONF_PROVIDER value="Basic" set var=CONF_DESCRIPTION value="Routed PPPoE configuration" set var=CONF_SERVICE value="Routed PPPoE - DHCP - NAT" set var=CONF_DATE value="4/7/2002" set var=CONF_VERSION value="4.0.0.8" set var=HOST_SETUP value="auto shortcut" set var=UPGRADE_URL value="http://www.speedtouch.com/upgrade500.htm" 'setting of env variables for use without wizard '----------------------------------------------- set var=PPPoE_userid value="" set var=%PPPoE_passwrd value="" set var=PPPoE_serviceid value="" set var=%passwrd value="" 'Definition of groups '-------------------- 'Definition of PPPoE group def var=PPPoE type=grp desc="Specify the details of the Routed PPPoE Packet Service. All information should be provided by your ISP." alias="Routed PPPoE Packet Service" 'Definition of password group def var=passwdgrp type=grp desc="Specify your user name and password to protect your SpeedTouch." alias="SpeedTouch security" 'PPPoE group '---------- 'variable PPPoE_userid def var=PPPoE_userid type=string grp=PPPoE alias="User Name" req desc="Enter your user name." 'variable PPPoE_passwrd def var=%PPPoE_passwrd type=passw grp=PPPoE alias="Password" req desc="Enter your password." 'password group '-------------- 'variable userid def var=userid type=string grp=passwdgrp alias="User Name" desc="Enter a SpeedTouch user name." 'variable passwrd def var=%passwrd type=passw grp=passwdgrp alias="Password" desc="Enter a SpeedTouch System Password." [ phone.ini ] add name=pppoe addr=8*35 type=ethoa add name=usb_port addr=usb.0.35 type=any logging=no [ qos.ini ] add name=default class=ubr tx_peakrate=0 [ bridge.ini ] ifadd intf=usb_bridge dest=usb_port logging=no ifattach intf=usb_bridge logging=no config age=300 [ brfilter.ini ] [ pptp.ini ] [ dhcp.ini ] config autodhcp=off scantime=20 spoofing=off trace=off policy verifyfirst=off trustclient=on spoof failtime=4 errorlt=60 dodlt=10 pool add name=LAN_private pool config name=LAN_private poolstart=10.0.0.1 poolend=10.255.255.254 netmask=8 leasetime=7200 start [ mer.ini ] [ ipoa.ini ] [ ppp.ini ] ifadd intf=pppoe rtadd intf=pppoe dst=0.0.0.0/0 src=10.0.0.0 srcmsk=1 ifconfig intf=pppoe dest=pppoe user=$PPPoE_userid password=$%PPPoE_passwrd proto=pppoe accomp=on addrtrans=pat encaps=llc restart=on status=up ifattach intf=pppoe [ cip.ini ] [ nat.ini ] bind application=H323 port=1720 bind application=FTP port=ftp bind application=RTSP port=554 bind application=IRC port=irc-u bind application=RAUDIO(PNA) port=7070 bind application=ILS port=ldap bind application=ILS port=1002 bind application=SIP port=5060 bind application=GRE port=1 bind application=PPTP port=1723 bind application=ESP port=1 bind application=IKE port=500 [ pfilter.ini ] [ pfirewall.ini ] chain create chain=sink chain create chain=forward chain create chain=source rule create chain=sink index=0 srcintfgrp=!wan action=accept rule create chain=sink index=1 prot=udp dstport=dns action=accept rule create chain=sink index=2 prot=udp dstport=68 action=accept rule create chain=sink index=3 action=drop rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop rule create chain=source index=0 dstintfgrp=!wan action=accept rule create chain=source index=1 prot=udp dstport=dns action=accept rule create chain=source index=2 prot=udp dstport=67 action=accept rule create chain=source index=3 action=drop assign hook=sink chain=sink assign hook=forward chain=forward assign hook=source chain=source [ ip.ini ] config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=static mssclamping=on apadd addr=10.0.0.138/8 intf=eth0 addroute=yes type=1 ifconfig intf=loop mtu=1500 group=local ifconfig intf=eth0 mtu=1500 group=lan ifconfig intf=ppp mtu=1500 group=wan rtadd dst=0.0.0.0/0 intf=eth0 metric=70 rtadd dst=224.0.0.0/4 intf=eth0 rtadd dst=255.255.255.255/32 intf=eth0 [ autoip.ini ] ifadd intf=eth0 ifconfig intf=eth0 poolstart=169.254.1.1 poolend=169.254.254.254 netmask=16 ifattach intf=eth0 [ eth.ini ] ifconfig intf=0 type=auto [ dnsd.ini ] domain domain=lan add hostname=SpeedTouch start troff [ dhcc.ini ] config trace=off [ adslpots.ini ] config opermode=multimode maxbitspertoneUS=13 [ adslisdn.ini ] config opermode=multimode maxbitspertoneUS=13 [ system.ini ] config upnp=enabled mdap=enabled dcache=enabled setpassword password=$%passwrd [ endofarch ]Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.