[ env.ini ] set var=CONF_REGION value="World" set var=CONF_PROVIDER value="Advanced" set var=CONF_DESCRIPTION value="Routed PPP configuration" set var=CONF_SERVICE value="Routed PPP DHCP - NAT" set var=CONF_DATE value="4/7/2002" set var=CONF_VERSION value="4.0.0.8" set var=HOST_SETUP value="auto shortcut" set var=UPGRADE_URL value="http://www.speedtouch.com/upgrade500.htm" 'setting of env variables for use without wizard '----------------------------------------------- set var=DSL_ADDR value="8*35" set var=PPP_type value="pppoe" set var=encaps value="llc" set var=PPPoA_userid value="" set var=%PPPoA_passwrd value="" set var=%passwrd value="" 'Definition of groups '-------------------- 'Definition of ATM group def var=ATM type=grp desc="Specify the details of the Routed PPP Packet service. All information should be provided by your ISP." alias="Routed PPP Service" 'Definition of PPP group def var=PPP type=grp desc="Specify the details of the PPP Packet Service. Most values are correct by default." alias="PPP Service" 'Definition of password group def var=passwdgrp type=grp desc="Specify your user name and password to protect your SpeedTouch." alias="SpeedTouch security" 'ATM group '--------- 'Variable DSL_ADDR def var=DSL_ADDR type=combo grp=ATM alias="VPI/VCI" data="0*35,0*36,0*37,8*35,8*36,8*37" default="8*35" req desc="Enter the VPI/VCI value you want to use or select one from the list. These values should be provided by your ISP." 'PPP group '----------- 'variable PPP_type def var=PPP_type type=list grp=PPP alias="PPP type" data="pppoa,pppoe" default="pppoe" desc="Select PPP over ATM (pppoa) or PPP over Ethernet (pppoe)" 'variable encaps def var=encaps type=list grp=PPP alias="Encapsulation" data="vcmux,llc" default="llc" desc="Select the required encapsulation: use 'llc' when PPPoE is selected above, use 'vcmux' for PPPoA." 'variable PPP_userid def var=PPP_userid type=string grp=PPP alias="User Name" req desc="Enter your user name." 'variable PPP_passwrd def var=%PPP_passwrd type=passw grp=PPP alias="Password" req desc="Enter your password." 'password group '-------------- 'variable userid def var=userid type=string grp=passwdgrp alias="User Name" desc="Enter a SpeedTouch user name." 'variable passwrd def var=%passwrd type=passw grp=passwdgrp alias="Password" desc="Enter a SpeedTouch System Password." [ phone.ini ] add name=ppp addr=$DSL_ADDR type=any add name=usb_port addr=usb.0.35 type=any logging=no [ qos.ini ] add name=default class=ubr tx_peakrate=0 [ bridge.ini ] ifadd intf=usb_bridge dest=usb_port logging=no ifattach intf=usb_bridge logging=no config age=300 [ brfilter.ini ] [ pptp.ini ] [ dhcp.ini ] config autodhcp=off scantime=20 spoofing=off trace=off policy verifyfirst=off trustclient=on spoof failtime=4 errorlt=60 dodlt=10 pool add name=LAN_private pool config name=LAN_private poolstart=10.0.0.1 poolend=10.255.255.254 netmask=8 leasetime=7200 start [ mer.ini ] [ ipoa.ini ] [ ppp.ini ] ifadd intf=ppp rtadd intf=ppp dst=0.0.0.0/0 src=10.0.0.0 srcmsk=1 ifconfig intf=ppp dest=ppp user=$PPP_userid password=$%PPP_passwrd proto=$PPP_type encaps=$encaps accomp=on addrtrans=pat restart=on status=up ifattach intf=ppp [ cip.ini ] [ nat.ini ] bind application=H323 port=1720 bind application=FTP port=ftp bind application=RTSP port=554 bind application=IRC port=irc-u bind application=RAUDIO(PNA) port=7070 bind application=ILS port=ldap bind application=ILS port=1002 bind application=SIP port=5060 bind application=GRE port=1 bind application=PPTP port=1723 bind application=ESP port=1 bind application=IKE port=500 [ pfilter.ini ] [ pfirewall.ini ] chain create chain=sink rule create chain=sink index=0 srcintfgrp=!wan action=accept rule create chain=sink index=1 prot=udp dstport=dns action=accept rule create chain=sink index=2 prot=udp dstport=68 action=accept rule create chain=sink index=3 action=drop chain create chain=forward rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop chain create chain=source rule create chain=source index=0 dstintfgrp=!wan action=accept rule create chain=source index=1 prot=udp dstport=dns action=accept rule create chain=source index=2 prot=udp dstport=67 action=accept rule create chain=source index=3 action=drop assign hook=sink chain=sink assign hook=forward chain=forward assign hook=source chain=source [ ip.ini ] config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=static mssclamping=on apadd addr=10.0.0.138/8 intf=eth0 addroute=yes type=1 ifconfig intf=loop mtu=1500 group=local ifconfig intf=eth0 mtu=1500 group=lan ifconfig intf=ppp mtu=1500 group=wan rtadd dst=0.0.0.0/0 intf=eth0 metric=70 rtadd dst=224.0.0.0/4 intf=eth0 rtadd dst=255.255.255.255/32 intf=eth0 [ autoip.ini ] ifadd intf=eth0 ifconfig intf=eth0 poolstart=169.254.1.1 poolend=169.254.254.254 netmask=16 ifattach intf=eth0 [ eth.ini ] ifconfig intf=0 type=auto [ dnsd.ini ] domain domain=lan add hostname=SpeedTouch start troff [ dhcc.ini ] config trace=off [ adslpots.ini ] config opermode=multimode maxbitspertoneUS=13 [ adslisdn.ini ] config opermode=multimode maxbitspertoneUS=13 [ system.ini ] config upnp=enabled mdap=enabled dcache=enabled setpassword password=$%passwrd [ endofarch ]Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.