BrEthoa_basic.ini Driver File Contents (9739.zip)

[ env.ini ]
set var=CONF_REGION value="World"
set var=CONF_PROVIDER value="Basic"
set var=CONF_DESCRIPTION value="Bridged Ethernet on 0/35 and 8/35"
set var=CONF_SERVICE value="Bridged Ethernet"
set var=CONF_DATE value="4/7/2002"
set var=CONF_VERSION value="4.0.0.8"
set var=HOST_SETUP value="auto"
set var=UPGRADE_URL value="http://www.speedtouch.com/upgrade500.htm"

'setting of env variables for use without wizard
'-----------------------------------------------
set var=%passwrd value=""

'Definition of groups
'--------------------
'Definition of password group
def var=passwdgrp type=grp desc="Specify your user name and password to protect your SpeedTouch." alias="SpeedTouch security"


'password group
'--------------
'variable userid
def var=userid type=string grp=passwdgrp alias="User Name" desc="Enter your user name."
'variable passwrd
def var=%passwrd type=passw grp=passwdgrp alias="Password" desc="Enter your password."

[ phone.ini ]
add name=Br1 addr=0*35 type=ethoa
add name=Br2 addr=8*35 type=ethoa
add name=usb_port addr=usb.0.35 type=any logging=no

[ qos.ini ]
add name=default class=ubr tx_peakrate=0

[ bridge.ini ]
ifadd intf=Br1 dest=Br1
ifattach intf=Br1
ifadd intf=Br2 dest=Br2
ifattach intf=Br2
ifadd intf=usb_bridge dest=usb_port logging=no
ifattach intf=usb_bridge logging=no

[ brfilter.ini ]

[ pptp.ini ]

[ dhcp.ini ]
pool add name=LAN_private
pool config name=LAN_private poolstart=10.0.0.1 poolend=10.255.255.254 netmask=255.0.0.0 leasetime=7200
config spoofing=off autodhcp=on scantime=20 trace=off
policy verifyfirst=off trustclient=on
spoof failtime=4 errorlt=60 dodlt=10
stop

[ mer.ini ]

[ ipoa.ini ]

[ ppp.ini ]

[ cip.ini ]

[ nat.ini ]
bind application=H323 port=1720
bind application=FTP port=ftp
bind application=RTSP port=554
bind application=IRC port=irc-u
bind application=RAUDIO(PNA) port=7070
bind application=ILS port=ldap
bind application=ILS port=1002
bind application=SIP port=5060
bind application=GRE port=1
bind application=PPTP port=1723
bind application=ESP port=1
bind application=IKE port=500

[ pfilter.ini ]

[ pfirewall.ini ]
chain create chain=sink
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=68 action=accept
rule create chain=sink index=3 action=drop
chain create chain=forward
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
chain create chain=source
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=67 action=accept
rule create chain=source index=3 action=drop
assign  hook=sink chain=sink
assign  hook=forward chain=forward
assign  hook=source chain=source

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=dynamic mssclamping=on
apadd addr=10.0.0.138/8 intf=eth0 addroute=yes type=1
rtadd dst=255.255.255.255/32 intf=eth0
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=0/0 intf=eth0 metric=70

[ autoip.ini ]
ifadd intf=eth0
ifconfig intf=eth0 poolstart=169.254.1.1 poolend=169.254.254.254 netmask=16
ifattach intf=eth0

[ eth.ini ]
ifconfig intf=0 type=auto

[ dnsd.ini ]
domain domain=lan
add hostname=SpeedTouch
stop
troff

[ dhcc.ini ]

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13

[ adslisdn.ini ]
config opermode=multimode maxbitspertoneUS=13

[ system.ini ]
config upnp=enabled mdap=enabled dcache=enabled
setpassword password=$%passwrd

[ endofarch ]

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.19